From VoIP.ms Wiki
(Difference between revisions)
| [quality revision] | [checked revision] |
|
|
| (38 intermediate revisions not shown) |
| Line 1: |
Line 1: |
| - | VoIP.ms charges calls on a 6 secs period increment.
| + | #REDIRECT [[Service_Cost]] |
| - | | + | |
| - | Here is a short explanation about how this works.
| + | |
| - | | + | |
| - | The Billing Increment is a call duration measurement unit expressed in seconds. 1 minute is devided on 10 periods of 6 seconds. Lets say there is a rate of $1/2 USD per minute, then the user will be charged for 5 cents per each period of 6 seconds.
| + | |
| - | | + | |
| - | (0.05 USD )* (10 periods on a minute) = $1/2 USD
| + | |
| - | | + | |
| - | If you make a call of 27 sec, you will be charged for 30 sec as you are running in the 5th period of 6. The system allways registers the number of cycles of 6 secs.
| + | |
| - | | + | |
| - | You could also use the next formula: (per minute rate / number of increments per minute) * (duration of call / billing increment)
| + | |
| - | | + | |
| - | | + | |
| - | Note: Mexico is the only country with a different period increment. The period increment for Mexico is 60 seconds
| + | |
Latest revision as of 18:28, 10 March 2026
- REDIRECT Service_Cost
