Calls Cost
From VoIP.ms Wiki
| [draft revision] | [quality revision] |
| Line 13: | Line 13: | ||
| - | The system allways registers the number of cycles of 6 secs, therefore if you make a call of 27 sec, you will be charged for 30 sec as you are running in the 5th period of 6. | + | The system allways registers the number of cycles of 6 secs, therefore if you make a call of 27 sec, you will be charged for 30 sec as you are running in the 5th period of 6 seconds. |
Revision as of 18:09, 19 May 2011
VOIP.MS charges their calls based on a 6 secs period increment. This applies for all countries except for Mexico where it apply a 60 sec increment.
Here is a short explanation about how this works.
The Billing Increment is a call duration measurement unit expressed in seconds. 1 minute is devided on 10 periods of 6 seconds.
You could also use the next formula: (per minute rate / number of increments per minute) * (duration of call / billing increment)
Lets say there is a rate of $0.50 USD per minute, then the user will be charged for 5 cents per each period of 6 seconds.
(0.05 USD )* (10 periods on a minute) = $0.50 USD
The system allways registers the number of cycles of 6 secs, therefore if you make a call of 27 sec, you will be charged for 30 sec as you are running in the 5th period of 6 seconds.
