Atcom AG188N

From VoIP.ms Wiki

[checked revision]

[quality revision]

Revision as of 15:09, 31 May 2011 (view source) Andrew (Talk | contribs) (Created page with "==Configuration Details== '''Step 1''' The first step is to find out what IP Address your adapter is currently using. '''Step 2''' '''Using your favorite web browser from a...") ← Older edit		Latest revision as of 04:56, 2 September 2019 (view source) Jannatul (Talk | contribs)
(16 intermediate revisions not shown)
Line 1:		Line 1:
-	==Configuration Details==	+	__TOC__
-	'''Step 1'''	+	[[File:Atcom-ag188n.jpg|300px|thumb|left|Atcom AG188N]]
		+	<div style="width:100%;overflow:hidden;clear:both"></div>
-	The first step is to find out what IP Address your adapter is currently using.
		+	== '''Documentation:''' ==
-	'''Step 2'''	+	[http://www.senatelecom.com/downloads/atcom/AG188N-USER%20MANUAL-W-V080408-En.pdf User´s Manual]<br>
-	'''Using your favorite web browser from a computer on the same network, point the address to the IP address of your adapter.'''<br>	+	=='''Accessing Your Device´s Configuration Page:'''==
-	<nowiki>(example http://192.168.1.2)</nowiki> Replace 192.168.1.2 by the IP Address your device is currently using.	+
		+	Get the IP Address to access your AG-188N from the handset:
-	'''Step 3'''	+	First please pick up the handset and dial #*111#
-	You should now see the web interface of your Atcom AG188N.	+	Then you will hear the AG-188N’s IP address, please write it down.
		+	Enter the AG-188N’s IP address into a web browser and press enter, then you can access AG-188N’s web manage interface.
		+	Remember the account login is admin/admin for administrator and guest/guest for user.
-	'''Step 4'''
-	'''Find the following fields and fill them with the following information as bellow:'''	+	=='''SIP Configuration Section:'''==
-	'''Register Server Addr:''' atlanta.voip.ms (one of our multiple servers)<br>
-	'''Register Server Port:''' 5060<br>
-	'''Register Username:''' 100000 (your VoIP.ms username)<br>
-	'''Register Password:''' ******** (the account password)<br>
-	'''Detect Interval Time:''' 60<br>
-	'''DTMF Mode:''' DTMF_RFC2833<br>
-	'''Enable Via rport:''' Enabled<br>
-	'''Local SIP Port:''' 5060<br>
-	'''Register Expire Time:''' 60<br>
-	'''RFC Protocol Edition:''' RFC3261<br>
-	'''Server Type:''' common<br>
-	'''SIP Default Protocol:''' Enabled<br>
		+	*'''Fill the following fields according to your account:'''
		+	**'''Register Server Addr:''' atlanta.voip.ms (one of our multiple servers)
		+	**'''Register Server Port:''' 5060
		+	**'''Register Username:''' 100000 (your VoIP.ms username)
		+	**'''Register Password:''' ******** (the account password)
		+	**'''Detect Interval Time:''' 60
		+	**'''DTMF Mode:''' DTMF_RFC2833
		+	**'''Enable Via rport:''' Enabled
		+	**'''Local SIP Port:''' 5060
		+	**'''Register Expire Time:''' 180
		+	**'''RFC Protocol Edition:''' RFC3261
		+	**'''Server Type:''' common
		+	**'''SIP Default Protocol:''' Enabled
-	'''Step 5'''	+	*'''Click on the "Apply" button at the bottom of the form.'''
-		+
-	Click on the "Apply" button at the bottom of the form.	+
Line 47:		Line 48:
-	[[File:Atcom.JPG|Atcom AG188N Configuration Screen|frame|left]]	+	[[File:Atcom.JPG|Atcom AG188N Configuration Screen]]
		+
		+	==Known Issues with this Device:==
		+
		+	'''Problems when dialing *97 for Voicemail:'''
		+
		+	With one phone hooked to the ‘phone’ jack, you can dial a star code to access the PSTN line instead of the SIP/IAX configured on the ATA. So, one analog phone enables you to use either SIP/IAX or the PSTN. However, people using the ATA with Asterisk have a problem when they want to dial Asterisk * codes like *97 for voicemail (as the * takes you to PSTN). The solution is to delete the “lifeline *T” option from “Dial-Peer” menu.
		+
		+	==Guide Links==
		+	In the event where you need the guide directly from Atcom, you may find the user manual guide below:
		+
		+	User Manual : [http://www.atcom.cn/uploadfile/2014/1219/ata/ag198/AG198-Quick%20Start%20Guide-W-D110728-EN.pdf Download PDF]
		+
		+	[[category:Analog Telephone Adapters]]

---

Latest revision as of 04:56, 2 September 2019

Contents 1 Documentation: 2 Accessing Your Device´s Configuration Page: 3 SIP Configuration Section: 4 Known Issues with this Device: 5 Guide Links

Documentation:

User´s Manual

Accessing Your Device´s Configuration Page:

Get the IP Address to access your AG-188N from the handset:

First please pick up the handset and dial #*111#

Then you will hear the AG-188N’s IP address, please write it down.

Enter the AG-188N’s IP address into a web browser and press enter, then you can access AG-188N’s web manage interface.

Remember the account login is admin/admin for administrator and guest/guest for user. 

SIP Configuration Section:

• Fill the following fields according to your account:
  • Register Server Addr: atlanta.voip.ms (one of our multiple servers)
  • Register Server Port: 5060
  • Register Username: 100000 (your VoIP.ms username)
  • Register Password: ******** (the account password)
  • Detect Interval Time: 60
  • DTMF Mode: DTMF_RFC2833
  • Enable Via rport: Enabled
  • Local SIP Port: 5060
  • Register Expire Time: 180
  • RFC Protocol Edition: RFC3261
  • Server Type: common
  • SIP Default Protocol: Enabled

• Click on the "Apply" button at the bottom of the form.

Configuration Screen

Known Issues with this Device:

Problems when dialing *97 for Voicemail:

With one phone hooked to the ‘phone’ jack, you can dial a star code to access the PSTN line instead of the SIP/IAX configured on the ATA. So, one analog phone enables you to use either SIP/IAX or the PSTN. However, people using the ATA with Asterisk have a problem when they want to dial Asterisk * codes like *97 for voicemail (as the * takes you to PSTN). The solution is to delete the “lifeline *T” option from “Dial-Peer” menu.

Guide Links

In the event where you need the guide directly from Atcom, you may find the user manual guide below:

User Manual : Download PDF