Snom IP Phones

From VoIP.ms Wiki

[checked revision]

[checked revision]

Revision as of 18:36, 23 August 2019 (view source) Neocypher (Talk | contribs) (→Accessing The Web Interface) ← Older edit		Revision as of 18:39, 23 August 2019 (view source) Neocypher (Talk | contribs) Newer edit →
Line 2:		Line 2:
	<br clear="all" />		<br clear="all" />
-	The new [https://www.snom.com/ip-phones/desk-phones/d7xx-series/d735/ Snom D735]  hits the right notes thanks to its timeless design and the two modern colour variants – this telephone is on the cutting edge, both technically and in terms of appearance.	+	The following steps and configuration apply for the Snom IP phone models: D120, D717, D735, D785
-		+
-	The high-resolution 2.7” colour display is surrounded by eight multicoloured function keys that you can label yourself.	+
-		+
-	The Snom D735 is a compact all rounder and is perfect for all possible uses thanks to its modern and smart functions, as well as the timeless design and colour variants. The new, optimised firmware allows each user to forward calls at the touch of a button, initiate conference calls or mute the telephone temporarily.	+
	<br clear="all" />		<br clear="all" />

---

Revision as of 18:39, 23 August 2019

The following steps and configuration apply for the Snom IP phone models: D120, D717, D735, D785

Contents 1 Accessing The Web Interface 2 Identity Settings 2.1 Login Information 2.2 SIP Identity Settings 2.3 RTP Identity Settings

Accessing The Web Interface

In order to configure the Snom IP phone to be used along our service it is required to access it's web interface settings. For this, the IP address of the device must be acquired.

To perform this click on the "Settings" button of the phone. Once on the settings menu, go to: " Information " , then select: " System information ". On this section, you'll need to take note of the IP address shown beside: " IP Adr ". It should read back something as: " 192.168.0.1 ".

Once you have the IP address please open a web browser of your preference and it's URL bar enter the IP address you got by prepending: " http:// " and access it. Once accessed, you'll be prompted to authenticate. The default administrator password is: " 0000 ".

Identity Settings

Once logged in you'll be presented with this screen:

Here, please navigate to: Identity 1. Once on this page, please fill these fields as follows:

Login Information

• Displayname: The name you wish to pass when calling out
• Account: 100000 (replace with your SIP main account or subaccount)
• Password: Your SIP account's password
• Registrar: One of VoIP.ms multiple servers, you can choose the one closest to your location
• Outbound Proxy: The same server used above for registrar server
• Authentication Username: 100000 (replace with your SIP main account or subaccount)
• Mailbox: *97

Once done press the: "Apply" button at the bottom. Then, head to the: " SIP " tab. Here, fill these fields as follows:

SIP Identity Settings

• Dial-Plan String: ^.$
• Proposed Expiry: 300
• Subscription Expiry: 300
• Failed Subscription Retry Time: 300

Once done press the: " Apply " button at the bottom. Then, head to the: " RTP " tab.

RTP Identity Settings

Here, leave only the following text on the " Codec " section:

pcmu,gsm,g729,telephone-event

Finally, press the: "Apply" button on the bottom and then the: "Save" button at the top. If you're prompted to reboot the phone please do so. When all these steps are taken & fulfilled the device will be ready for use.

If you experience any issues or find anything you'd like to contribute with please don't hesitate to contact us.