Fanfill X4g
From VoIP.ms Wiki
| [draft revision] | [draft revision] |
Abe.sherman (Talk | contribs) |
Abe.sherman (Talk | contribs) |
||
| Line 2: | Line 2: | ||
| - | SIP ACCOUNT | + | |
| + | == SIP ACCOUNT == | ||
| + | |||
Once you have connected your device to your local connection, it will be necessary to obtain the local IP address that was designated for it. | Once you have connected your device to your local connection, it will be necessary to obtain the local IP address that was designated for it. | ||
Revision as of 15:01, 8 May 2019
SIP ACCOUNT
Once you have connected your device to your local connection, it will be necessary to obtain the local IP address that was designated for it.
-From your IP phone navigate through the menus to obtain its IP address:
OK >> Status >> IP Address
-Now that you have the Local IP address, open it in your web browser of preference.
-Once you have opened the login page, use the following credentials to access to the configuration:
Username: admin
Password: admin
General Settings
-Once you see the settings page, go to the following:
Line >> Sip 1# >>
UserName: Username or sub-account Display name: Optional
Username: Your voip.ms Account or sub-acount Display name: Name your display name like Line 1. Authentication Name: Your voip.ms Account or sub-acount. Authentication Password: Your Sip account or sub account password. Server Name: houston.voip.ms Register Address: houston.voip.ms Register Port 5060 Proxy Server Address: houston.voip.ms Backup Proxy Server Address: You may need to use houston.voip.ms again. Backup Proxy Server Port 5060 Activate: Check activate. click Apply
Refresh page and see if it shows registered.
Time Setting
Phone Settings >> Time/Date >> Time Synchronized via DHCP: Yes Time zone: Select your time zone Click apply
