Konftel 300Wx IP

From VoIP.ms Wiki

You do not have permission to edit this page, for the following reasons:

• The action you have requested is limited to users in one of the groups: staff, customer.
• You must confirm your e-mail address before editing pages. Please set and validate your e-mail address through your user preferences.

You can view and copy the source of this page:

[[File:Konftel-300Wx-IP.png|300px|thumb|left]] <br clear="all" /> The wireless conference phone [https://www.konftel.com/en/products/konftel-300wx Konftel 300Wx] allows you to hold meetings wherever is convenient for you – without worrying about network and power outlets. The wireless DECT technology is both reliable and secure. Choose a base station to suit your company's telephony environment, SIP or analog, or connect to an installed DECT system. The rechargeable battery ensures more than 60 call hours, so you can talk for a full work week without recharging! <br clear="all" /> __TOC__ == Configuring a line == ==='''Accessing The Web Interface'''=== In order to configure the 300WX device to be used along with our service, it is required to access it's web interface settings. For this, the IP address of the device must be acquired. To perform this click on the menu and navigate to: " '''''Status''''' " , then select: " '''''Network''''' ". It should read back something as: " '''''192.168.0.1''''' Once you have the IP address please open a web browser of your preference and at the URL bar enter the IP address you got by prepending: " '''''http://''''' " and access it. Once accessed, you'll be prompted to authenticate. Profile: " '''''admin''''' " Password: " '''''admin''''' " [[File:kon300_main.png|thumb|none|600px]] ===Adding a SIP Server=== Once logged in, please navigate to: ''Server'' on the left menu and click ''Add Server''. [[File:kon300_add_server.png|thumb|none|600px]] Set up the account you will be using, with the following values :*'''''Server Alias''''': An alias name for your server (It can be the server's name) :*'''''NAT Adaption''''': Enabled :*'''''Registrar''''': One of VoIP.ms multiple [[Choosing Server | servers]], you can choose the one closest to your location :*'''''Outbound Proxy''''': Set the same server you set at ''Registrar'' :*'''''Reregistrarion time (s)''''': 300 :*'''''SIP Transport''''': TCP :*'''''Keep Alive''''': Enabled :*'''''Codec Priority''''': Here leave only the codecs you have enabled in your SIP account's settings Then click "Save" and go to "Extensions" Once done, click the ''Save'' and go to the "Extensions" menu on the left [[File:kon300_server.png|thumb|none|600px]] ===Adding an Extension=== Here, click on "Add extension" and complete the fields with your sub account's information: :*'''Extension''': 100000 (replace with your SIP main account or subaccount) :*'''Authentication Username''': 100000 (replace with your SIP main account or subaccount) :*'''Authentication password''': Your SIP account's password :*'''Server''': The server you created on a [[#Adding_a_SIP_Server | previous step]] (Since you can have more than one server, be sure that is the one you need to use) On the right, you will see listed the handsets available for your IP DECT, select the one you will use with the current extension (as marked within the image below) Click on "Save" after you are done. [[File:kon300_extension.png|thumb|none|600px]] ==Configuring with TLS / Encryption== '''NOTE''': This section is optional. It explains in detail how to use encrypted traffic in the device. If you are not certain about how encrypted traffic works, or the benefits of encrypting SIP traffic, please contact technical support for more information. The Konftel 300Wx is compatible with TLS, however, some settings need to be adjusted to have it working. This section will be assuming that your SIP account is already enabled to use TLS, if you have not enabled it yet, please follow these instructions before going further: For more information on how to enable encrypted traffic for the main account, please click on [[Call_Encryption_-_TLS/SRTP#Activate_This_Option_on_Your_Main_Account | Main account]] or more information on how to enable encrypted traffic for the sub-account [[Call_Encryption_-_TLS/SRTP#Activate_This_Option_on_Your_Sub_Account | sub account]] ===Adding a SIP Server with TLS=== Once logged in, please navigate to: ''Server'' on the left menu and click ''Add Server''. [[File:kon300_add_server.png|thumb|none|600px]] Set up the account you will be using, with the following values :*'''''Server Alias''''': An alias name for your server (It can be the server's name) :*'''''NAT Adaption''''': Enabled :*'''''Registrar''''': One of VoIP.ms multiple [[Choosing Server | servers]], you can choose the one closest to your location :*'''''Outbound Proxy''''': Set the same server you set at ''Registrar'' :*'''''Reregistrarion time (s)''''': 300 :*'''''SIP Transport''''': TCP :*'''''Keep Alive''''': Enabled :*'''''Codec Priority''''': Here leave only the codecs you have enabled in your SIP account's settings :*'''''Sercure RTP''''': Enabled :*'''''Secure RTP Auth''''': Enabled Then click "Save" and go to "Extensions" Once done, click the ''Save'' and go to the "Extensions" menu on the left [[File:kon300_serverTLS.png|thumb|none|600px]] ===Adding an Extension with a TLS server=== Here, click on "Add extension" and complete the fields with your sub account's information: :*'''Extension''': 100000 (replace with your SIP main account or subaccount) :*'''Authentication Username''': 100000 (replace with your SIP main account or subaccount) :*'''Authentication password''': Your SIP account's password :*'''Server''': The server you created on a [[#Adding_a_SIP_Server | previous step]] (Since you can have more than one server, be sure that is the one you need to use) On the right, you will see listed the handsets available for your IP DECT, select the one you will use with the current extension (as marked within the image below) Click on "Save" after you are done. [[File:kon300_extensionTLS.png|thumb|none|600px]] == Verifying its status == If all was properly set and your device has connectivity, you will be registered. You can confirm this on the ''Status'' section on your device (besides your VoIP.ms customer portal) Go to ''''' Extensions''''' and you should see information similar to the one below [[File:kon300_extensionsRegistered.png|thumb|none|600px]] [[category:SIP phones]]

Return to Konftel 300Wx IP.