Asterisk PJSIP - VoIP.ms Wiki

Check out our YouTube channel to watch our simple tutorials that will help you set up most of our features.

Asterisk PJSIP

From VoIP.ms Wiki

(Redirected from Asterisk (PJSIP))
Jump to: navigation, search

Contents

Asterisk (PJSIP)

pjsip.conf

[transport-udp]
type = transport
protocol = udp
bind = 0.0.0.0

[voipms]
type = registration
transport = transport-udp
outbound_auth = voipms
client_uri = sip:[email protected]:5060     ; (one of our multiple servers, you can choose the one closer to your location)
server_uri = sip:atlanta.voip.ms:5060            ; (one of our multiple servers, you can choose the one closer to your location)

[voipms]
type = auth
auth_type = userpass
username = 100000            ; (Replace with your 6 digit Main SIP Account User ID or Sub Account username, i.e. 123456 or 123456_sub)
password = johnspassword     ; your password

[voipms]
type = aor
contact = sip:[email protected]             ; (one of our multiple servers, you can choose the one closer to your location)

[voipms]
type = endpoint
transport = transport-udp
context = mycontext
disallow = all
allow = ulaw
; allow=g729                 ; uncomment if you support g729
from_user = 100000           ; (Replace with your 6 digit Main SIP Account User ID or Sub Account username, i.e. 123456 or 123456_sub)
auth = voipms
outbound_auth = voipms
aors = voipms
; NAT parameters:
rtp_symmetric = yes
rewrite_contact = yes
send_rpid = yes

[voipms]
type = identify
endpoint = voipms
match = atlanta.voip.ms      ; (one of our multiple servers, you can choose the one closer to your location)

extensions.conf

[mycontext]
; Make sure to include inbound prior to outbound because the _NXXNXXXXXX handler will match the incoming call and create a loop
include => voipms-inbound
include => voipms-outbound

[voipms-outbound]
exten => _1NXXNXXXXXX,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _1NXXNXXXXXX,n,Hangup()
exten => _NXXNXXXXXX,1,Dial(PJSIP/1${EXTEN}@voipms)
exten => _NXXNXXXXXX,n,Hangup()
exten => _011.,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _011.,n,Hangup()
exten => _00.,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _00.,n,Hangup()

; inbound context example for your DID numbers, do not add the number 1 in front

[voipms-inbound]
exten => 7863643011,1,Answer() ;your DID






Asterisk IP Auth. (PJSIP)

pjsip.conf

Note: You'll need to create a sub account to use IP Auth

[transport-udp]
type = transport
protocol = udp
bind = 0.0.0.0

[voipms]
type = aor
contact = sip:[email protected]             ; (one of our multiple servers, you can choose the one closer to your location)

[voipms]
type = endpoint
transport = transport-udp
context = mycontext
disallow = all
allow = ulaw
; allow=g729                 ; uncomment if you support g729
from_user = 100000           ; (Replace with your 6 digit Main SIP Account User ID or Sub Account username, i.e. 123456 or 123456_sub)
aors = voipms
; NAT parameters:
rtp_symmetric = yes
rewrite_contact = yes
send_rpid = yes

[voipms]
type = identify
endpoint = voipms
match = atlanta.voip.ms      ; (one of our multiple servers, you can choose the one closer to your location)

extensions.conf

[mycontext]
; Make sure to include inbound prior to outbound because the _NXXNXXXXXX handler will match the incoming call and create a loop
include => voipms-inbound
include => voipms-outbound

[voipms-outbound]
exten => _1NXXNXXXXXX,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _1NXXNXXXXXX,n,Hangup()
exten => _NXXNXXXXXX,1,Dial(PJSIP/1${EXTEN}@voipms)
exten => _NXXNXXXXXX,n,Hangup()
exten => _011.,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _011.,n,Hangup()
exten => _00.,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _00.,n,Hangup()

; inbound context example for your DID numbers, do not add the number 1 in front

[voipms-inbound]
exten => 7863643011,1,Answer() ;your DID

Personal tools
Namespaces
Variants
Actions
VoIP.ms Blog
Guides (Français)
Guías (Español)