Yealink SIP-T28P

From VoIP.ms Wiki

[quality revision]

[quality revision]

Revision as of 13:32, 17 September 2014 (view source) 90210chris (Talk | contribs) (→Configuration Details) ← Older edit		Revision as of 21:32, 11 February 2015 (view source) 90210chris (Talk | contribs) Newer edit →
(2 intermediate revisions not shown)
Line 38:		Line 38:
	* Click on '''Confirm''' button to save your settings.		* Click on '''Confirm''' button to save your settings.
		+
		+	'''Preventing Direct IP Scanner Calls from 100'''
		+
		+	The newer firmware has an option in the General Settings called "Allow IP Call", please set this to "Disabled".
		+
	[[category:SIP phones]]		[[category:SIP phones]]

---

Revision as of 21:32, 11 February 2015

Configuration Details

Get the IP Address

• Press the OK button
• The IP Address should appear on screen

Web Management

• Open your web browser and go to http://<ipaddress>
• Login to web management (Default User : admin, default Password : admin)

Account Settings

• Go to Account tab
• Chose one account
• Fill in the following values:
  • Account Active: On
  • Label: 100000 (your VoIP.ms username)
  • Display Name: John Smith (your name)
  • Register Name: 100000 (your VoIP.ms username)
  • User Name: 100000 (your VoIP.ms username)
  • Password: ********* (account password)
  • SIP Server: atlanta.voip.ms (one of our multiple servers)

Advanced

• Subscribe Period: 300

300 is also to be used for Login Expire(seconds), to be changed from 3600

• Click on Confirm button to save your settings.

Preventing Direct IP Scanner Calls from 100

The newer firmware has an option in the General Settings called "Allow IP Call", please set this to "Disabled".