Yealink SIP-T28P

From VoIP.ms Wiki

[quality revision]

[quality revision]

Revision as of 20:13, 12 February 2015 (view source) Jeff (Talk | contribs) (→Configuration Details) ← Older edit		Revision as of 15:39, 4 September 2019 (view source) Jannatul (Talk | contribs) Newer edit →
Line 46:		Line 46:
	The newer firmware also has an option in the General Settings called "Allow IP Call", please set this to "Disabled".		The newer firmware also has an option in the General Settings called "Allow IP Call", please set this to "Disabled".
		+
		+	==Guide Links==
		+	In the event where you need the guide directly from *******, you may find the user/admin manual guide below:
		+
		+	User Manual : [http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2015-3-12%2F2%2Fe4dcfce0-a574-41a0-95bf-08370826f22d%2FYealink+SIP-T28P+Datasheet.pdf Download PDF]
	[[category:SIP phones]]		[[category:SIP phones]]

---

Revision as of 15:39, 4 September 2019

Configuration Details

Get the IP Address

• Press the OK button
• The IP Address should appear on screen

Web Management

• Open your web browser and go to http://<ipaddress>
• Login to web management (Default User : admin, default Password : admin)

Account Settings

• Go to Account tab
• Chose one account
• Fill in the following values:
  • Account Active: On
  • Label: 100000 (your VoIP.ms username)
  • Display Name: John Smith (your name)
  • Register Name: 100000 (your VoIP.ms username)
  • User Name: 100000 (your VoIP.ms username)
  • Password: ********* (account password)
  • SIP Server: atlanta.voip.ms (one of our multiple servers)

Advanced

• Subscribe Period: 300

300 is also to be used for Login Expire(seconds), to be changed from 3600

• Click on Confirm button to save your settings.

Preventing Direct IP Scanner Calls from 100

Please make sure you have the latest firmware upgrade and look for and Enable the setting "Accept SIP Trust Server Only" which is at the bottom of the Advanced Tab under Account.

The newer firmware also has an option in the General Settings called "Allow IP Call", please set this to "Disabled".

Guide Links

In the event where you need the guide directly from *******, you may find the user/admin manual guide below:

User Manual : Download PDF