Trixbox - VoIP.ms Wiki

Trixbox

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[draft revision][draft revision]
Line 132: Line 132:
Now let's create an extension,these are very important, as they are an important peace to make and receive calls.
Now let's create an extension,these are very important, as they are an important peace to make and receive calls.
-
Just on the left we have all these options, please go to Basic >> Extensions and once we are there goes to "Add Extension".  
+
Just on the left we have all these options, please go to Basic >> Extensions and once we are there goes to "Add Extension". And then you can select your device type.  
[[File:Extension1.jpg|600px]]
[[File:Extension1.jpg|600px]]

Revision as of 15:23, 22 June 2011

In this entry we show how to get started in Trixbox, the initial settings and first steps.

But before, we talk a little about what is Trixbox and what we can do with it.

Trixbox is an operating system distribution that has the distinction of being a telephone exchange (PBX) software based on open source Asterisk PBX. Like any PBX, to interconnect a company's internal phone and connect the telephone network.

With Trixbox we are many features including:

First Steps

Once installed Trixbox and once they load, we going to be in this section that asks us to connect us with the server. Will ask us for a username and password, by default is: root Login / Password: password (or select one if you set at the time of installation).


Trixbox.jpg



After that please select the IP that are show it. And paste this on your browser.
Trixbox log.jpg IP Browse.jpg



Once we're there, we will log by clik in "Switch" Please log in, by default the user/password are: maint/password.
Switch 2.jpg Switch.jpg


Basic

Trunk


Now we are in the main Trixbox interface, here is where we will see an overview of our system. To begin configuring your Trixbox with our VoIP.ms account go to the PBX section >> PBX Settings.

Trixbox inter.jpg

Once you get in, please go to the trunk section and then please select the trunk of your choice, SIP or IAX2.

Trunks 1.jpg

Now we are in the SIP Trunk Section.

SIP trunk 1.jpg

Only the first matched rule will be excuted and the remaining rules will not be acted on.

Rules:

   X mathes any digit from 0-9
   Z matches any digit from 1-9
   N matches any digit from 2-9

A few samples for how to set your rules:

   A local 7 digts number: NXXXXX 
   Toll-Free numbers : 1800NXXXXX
   There are a few samples , you can set all your rules in the outbound routes section. 


Trunk Out.jpg

   canreinvite=nonat
   ; nat=yes ; uncomment if behind nat
   context=from-trunk
   host=atlanta.voip.ms
   secret=johnspassword ;your password
   type=friend
   username=100000 ;your account
   disallow=all
   allow=ulaw
   ; allow=g729 ; uncomment if you purchased g.729 from Digium
   fromuser=100000 ;your account
   trustrpid=yes
   sendrpid=yes
   insecure=port,invite
   qualify=yes

Register String.jpg

      your account:password@server.voip.ms:5060 
   You can select one of our different servers: 
   Atlanta, GA: atlanta.voip.ms        (174.34.146.162)
   Chicago, IL: chicago.voip.ms        (64.120.22.242)
   Dallas, TX: dallas.voip.ms          (74.54.54.178)
   Houston, TX: houston.voip.ms        (209.62.1.2)
   Los Angeles, CA: losangeles.voip.ms (67.215.241.250)
   New York, NY: newyork.voip.ms       (74.63.41.218)
   Seattle, WA: seattle.voip.ms        (69.147.236.82)
   Tampa, FL: tampa.voip.ms            (68.233.226.97)
   Montreal 2,QC: montreal2.voip.ms    (174.142.75.171)
   Toronto 2, ON: toronto2.voip.ms     (174.137.63.206)
   Montreal,QC: montreal.voip.ms       (67.205.74.164)
   Toronto, ON: toronto.voip.ms        (174.137.63.206)
   London, UK: london.voip.ms          (78.129.153.20)

Then you gonna submit your change.

Remember to apply all your changes click on "Apply Configuration Change"

Config change.jpg


Extensions

Now let's create an extension,these are very important, as they are an important peace to make and receive calls.

Just on the left we have all these options, please go to Basic >> Extensions and once we are there goes to "Add Extension". And then you can select your device type.

Extension1.jpg

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox