Porting a US Number - VoIP.ms Wiki

Porting a US Number

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[draft revision][draft revision]
Line 1: Line 1:
-
You can port one or multiple numbers within one port order. Please note that in order to port multiple numbers in one order, all the numbers have to be on the same Invoice and belong to the same account with the losing provider. They must all be associated to the same billing telephone number. The fee is Free (For limited time)
+
You can port one or multiple numbers within one port order. Please note that in order to port multiple numbers in one order, all the numbers must be on the same invoice and belong to the same account with the losing provider. They must all be associated to the same billing telephone number; if the information is somehow different, you will need to start another request. The fee is Free (For limited time)
'''Please note:''' The process takes 2-4 weeks.
'''Please note:''' The process takes 2-4 weeks.
-
You should not mix toll-free numbers and local numbers on the same order. Also, if the information is somehow different, you will need to start another request.
+
You should not mix toll-free numbers and local numbers on the same order.  

Revision as of 19:54, 28 June 2016

You can port one or multiple numbers within one port order. Please note that in order to port multiple numbers in one order, all the numbers must be on the same invoice and belong to the same account with the losing provider. They must all be associated to the same billing telephone number; if the information is somehow different, you will need to start another request. The fee is Free (For limited time)

Please note: The process takes 2-4 weeks.

You should not mix toll-free numbers and local numbers on the same order.


In the following lines you will find all the necessary steps to port an existing US number from another provider to VoIP.MS

Before starting the port process, it is very important to verify if your number can be ported to the VoIP.MS network, please confirm this at http://wiki.voip.ms/article/Porting_a_Number#Check_Availability [[1]]


Step 1.

First you have to confirm the order type of your port process. In this case, will be a US number.


Portstep1.JPG


Step 2.

Now you should enter the number(s) you would like to port. If you have more than 1 number with the losing provider but you only want to port one or some of them, you should check on YES at the "Partial Port" section and then type the list of services and/or numbers that will remain with the current carrier and what is to do with them (disconnect them, keep them as it is, etc.)

If you want to port all of them, you have to check on NO at "Partial Port" and you should enter all the numbers at "DID Number(s) to port" .

When this has been done, you will need to specify if the numbers are for a residence or a business use. If you are going to port a mobile number you have to provide the 4 last digits of the SSN and PIN Number.


Portstep2.JPG


Step 3.

Now you should enter all information the required information. It must be exactly as it appears on the CSR (Customer Service Record) of the losing carrier. Please note that your Customer Service Record can differ from your billing address. If you are not sure, please contact your current service provider to get that information as it is the most important piece of information to raise the chances of having a successful port.

If you are planning to port a number under a different name than yours to a voip.ms account, you just have to fill the information as it appears on the CSR. It does not matter if the name on the losing carrier's account does not match with the information at VoIP.ms.


Portstep3.JPG


Step 4.

You must enter the Service provider/Carrier Information. What is needed is your Customer Account number and Service Provider Name.


Portstep4.JPG


Step 5.

What is needed here is to upload a scan of your latest signed invoice from your losing provider. Please place your signature on a Blank part where there are no elements interfering with it. If the provider of the number does not provide an invoice, you could take a screenshot from your Portal where it shows your number and account information.

If you would like to include any comment or additional information to this port. You can do it at the Notes/Comments field.

If you want your number can be updated on CNAM/LIDB database information, you can leave a note in the porting request, stating you want to have the number ported with a carrier that supports this process, our LNP Department will arrange with the provider to have it ported to one that supports the caller ID name update process (CNAM), note that this does not guarantee it can be done, since not all the numbers can be allocated with a carrier that support it. Please inquire the LNP department of the regular support staff about the cost of adding the number to the CNAM/LIDB database


Portstep5.JPG


Step 6.

The system will show you the number(s) are going to be ported, the porting fee per number and the Total amount that will be debited from your balance. Please confirm that all information is correct.

After this, the port process will be completed and your request will be sent to the LNP Department on VoIP.ms

LNP Department will process your request and they will email you either requesting more information if needed or just to confirm everything is correct and will give you a FOC Date for your port as soon as the losing carrier confirms this information.


Portstep6.JPG


Please note that some carriers can take some hours to completely update their routes when a number has been ported and this could cause random situations with your number at your FOC Date.

Please contact the support department if a ported-in number is still unreachable from some providers after 24 hours since you were advised that the port had completed.

Thank you for your understanding.

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox