Porting a US Number - VoIP.ms Wiki

Porting a US Number

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[draft revision][draft revision]
Line 1: Line 1:
-
Porting a number is the process of transfer a number from one company to another. If you are a VoIP.ms customer and have an existing number you would like to have with us, it is possible to bring your number with our service. Toll free numbers, local USA/Canada and even International numbers can be ported with us, you can transfer a landline, cellphone or a number with another VoIP provider.
+
Porting a number is the process of transferring a number from one company to another. If you are a VoIP.ms customer and already have a number, it is possible to bring it to our service. Toll free numbers, local US/Canada and even International numbers can be ported to us, you can transfer landlines, cellphones or numbers from another VoIP provider.
-
We count with a LNP (Local Number Portability) department that handle all the porting process and guide the customer though it. They are also in charge to update the customer via email with any relevant information about his port status.
+
Our LNP (Local Number Portability) department handles all porting process and guides the customer through it. They are also in charge of updating the customer via email with any relevant information about the port status.
-
Here are explained all the steps needed to follow in order to port an existing number from another provider to VoIP.MS
+
In the following lines you will find all the steps to port an existing number from another provider to VoIP.MS
Line 18: Line 18:
Step 2.
Step 2.
-
Now you should enter the number(s) you would like to port. If you have more than 1 number with the loosing provider but you only want to port one or some of them, you should check on Yes at "Partial Port". If you want to port all of them, you have to check on No at "Partial Port" and you should enter all the numbers at "DID Number(s) to port" .
+
Now you should enter the number(s) you would like to port. If you have more than 1 number with the losing provider but you only want to port one or some of them, you should check on Yes at the "Partial Port" section. If you want to port all of them, you have to check on No at "Partial Port" and you should enter all the numbers at "DID Number(s) to port" .
-
After this you have to specify if the numbers are currently located at a residence or a business and if you are going to port a mobile number you have to provide the 4 last digits of the SSN and PIN Number.
+
When this has been done, you will need to specify if the numbers are for a residence or a business use. If you are going to port a mobile number you have to provide the 4 last digits of the SSN and PIN Number.
Line 29: Line 29:
Step 3.
Step 3.
-
Now you should enter all information the information required. It must be exactly as it appears on the CSR (Customer Service Record) of the losing carrier. Please note that your Customer Service Record can differ from your billing address. If you are not sure, please contact your current service provider to get that information.
+
Now you should enter all information the required information. It must be exactly as it appears on the CSR (Customer Service Record) of the losing carrier. Please note that your Customer Service Record can differ from your billing address. If you are not sure, please contact your current service provider to get that information.
-
If you are planning to port a number under a different name than yours to a voip.ms account, you just have to fill the information as it appears on the CSR, it does not matter if the name of your losing carrier account and voip.ms account doesn't match.
+
If you are planning to port a number under a different name than yours to a voip.ms account, you just have to fill the information as it appears on the CSR. It does not matter if the name on the losing carrier's account does not match with the information at VoIP.ms.
Line 49: Line 49:
Step 5.
Step 5.
-
What is needed here is to upload a scan of your latest signed invoice from your losing provider. Please place your signature on a blank part where there are no elements interfering with it. If the provider of the number does not provide an invoice, you could take a screen shot from your Portal where it shows your number and account information.
+
What is needed here is to upload a scan of your latest signed invoice from your losing provider. Please place your signature on a Blank part where there are no elements interfering with it. If the provider of the number does not provide an invoice, you could take a screen shot from your Portal where it shows your number and account information.
If you would like to include any comment or additional information to this port. You can do it at the Notes/Comments field.
If you would like to include any comment or additional information to this port. You can do it at the Notes/Comments field.
Line 63: Line 63:
Step 6.
Step 6.
-
The system will show you the number(s) are going to be ported, the porting fee per number and the Total amount that will be debited from your balance. Please confirm the information is correct.
+
The system will show you the number(s) are going to be ported, the porting fee per number and the Total amount that will be debited from your balance. Please confirm that all information is correct.
-
After this, the port process will be completed and your request will be sent to the LNP department on voip.ms
+
After this, the port process will be completed and your request will be sent to the LNP Department on VoIP.ms
-
LNP department will process your request and send you an email requesting more information if it is needed or just to confirm everything is fine and will give you a FOC Date for your port.
+
LNP Department will process your request and they will email you either requesting more information if needed or just to confirm everything is correct and will give you a FOC Date for your port as soon as the losing carrier confirms this information.
[[File:portstep6.JPG|600px]]
[[File:portstep6.JPG|600px]]

Revision as of 14:35, 13 July 2011

Porting a number is the process of transferring a number from one company to another. If you are a VoIP.ms customer and already have a number, it is possible to bring it to our service. Toll free numbers, local US/Canada and even International numbers can be ported to us, you can transfer landlines, cellphones or numbers from another VoIP provider.

Our LNP (Local Number Portability) department handles all porting process and guides the customer through it. They are also in charge of updating the customer via email with any relevant information about the port status.


In the following lines you will find all the steps to port an existing number from another provider to VoIP.MS


Step 1.

First you have to confirm the order type of your port process. Could be for a US, Canadian or Toll Free number.


Portstep1.JPG


Step 2.

Now you should enter the number(s) you would like to port. If you have more than 1 number with the losing provider but you only want to port one or some of them, you should check on Yes at the "Partial Port" section. If you want to port all of them, you have to check on No at "Partial Port" and you should enter all the numbers at "DID Number(s) to port" .

When this has been done, you will need to specify if the numbers are for a residence or a business use. If you are going to port a mobile number you have to provide the 4 last digits of the SSN and PIN Number.


Portstep2.JPG


Step 3.

Now you should enter all information the required information. It must be exactly as it appears on the CSR (Customer Service Record) of the losing carrier. Please note that your Customer Service Record can differ from your billing address. If you are not sure, please contact your current service provider to get that information.

If you are planning to port a number under a different name than yours to a voip.ms account, you just have to fill the information as it appears on the CSR. It does not matter if the name on the losing carrier's account does not match with the information at VoIP.ms.


Portstep3.JPG


Step 4.

You must enter the Service provider/Carrier Information. What is needed is your Customer Account number and Service Provider Name.


Portstep4.JPG


Step 5.

What is needed here is to upload a scan of your latest signed invoice from your losing provider. Please place your signature on a Blank part where there are no elements interfering with it. If the provider of the number does not provide an invoice, you could take a screen shot from your Portal where it shows your number and account information.

If you would like to include any comment or additional information to this port. You can do it at the Notes/Comments field.

If you want your number can be updated on CNAM/LIDB database information, you can leave a note in the porting request, stating you want to have the number ported with a carrier that supports this process, our LNP Department will arrange with the provider to have it ported to one that supports the caller ID name update process (CNAM), note that this does not guarantee it can be done, since not all the numbers can be allocated with a carrier that support it.


Portstep5.JPG


Step 6.

The system will show you the number(s) are going to be ported, the porting fee per number and the Total amount that will be debited from your balance. Please confirm that all information is correct.

After this, the port process will be completed and your request will be sent to the LNP Department on VoIP.ms

LNP Department will process your request and they will email you either requesting more information if needed or just to confirm everything is correct and will give you a FOC Date for your port as soon as the losing carrier confirms this information.


Portstep6.JPG

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox