PhonerLite - VoIP.ms Wiki

Check out our YouTube channel to watch our simple tutorials that will help you set up most of our features.

PhonerLite

From VoIP.ms Wiki

Revision as of 14:27, 25 April 2011 by Andrew (Talk | contribs)
Jump to: navigation, search

Configuration Details

  • Start PhonerLite
  • Select Manual Configuration

Phonerlite-wiz1.png

  • Proxy/Registrar: newyork.voip.ms (or any other VoIP.ms server)
  • Realm/Domain: newyork.voip.ms
  • Leave STUN blank

Click Next

Phonerlite-wiz2.png


  • Username: 100000 (your VoIP.ms username)
  • Authentication Name: Same as Username
  • Password: ********* (account password)

Click Next

Phonerlite-wiz3.png

  • Select your audio capture and playback devices
  • Click Next

Phonerlite-wiz4.png

  • Click Finish check box to save your profile
  • PhonerLite is now ready to make calls.


(Optional fine tuning)

Under Server you can change register time to voip.ms recommended 180 seconds.

Under Codecs turn off silence detection.

If you use headset you can set echo cancellation to 0 otherwise leave default. Default codec selection is adequate and will use highest quality g.711. If you have low bandwidth try unchecking g711 so calls default to GSM (make sure GSM is also checked on voip.ms server config). g.729 is not supported in this softphone.

Note: Whenever you make changes make sure to click the Save button to save them to your profile.

Personal tools
Namespaces
Variants
Actions
VoIP.ms Blog
Guides (Français)
Guías (Español)