From VoIP.ms Wiki
- Start PhonerLite
- Select Manual Configuration
- Proxy/Registrar: newyork.voip.ms (or any other voip.ms server)
- Realm/Domain: newyork.voip.ms
- Leave STUN blank
- Username: 100000 (Your VoIP.ms Account)
- Authentication Name: Same as Username
- Password: ********* (Account Password)
- Select your audio capture and playback devices
- Click Next
- Click Finish check box to save your profile
- PhonerLite is now ready to make calls.
(Optional fine tuning)
Under Server you can change register time to voip.ms recommended 180 seconds.
Under Codecs turn off silence detection.
If you use headset you can set echo cancellation to 0 otherwise leave default. Default codec selection is adequate and will use highest quality g.711. If you have low bandwidth try unchecking g711 so calls default to GSM (make sure GSM is also checked on voip.ms server config). g.729 is not supported in this softphone.
Note: Whenever you make changes make sure to click the Save button to save them to your profile.