PhonerLite - VoIP.ms Wiki

PhonerLite

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[draft revision][draft revision]
(PhonerLite setup instructions)
(Configuration Details)
Line 4: Line 4:
* Select Manual Configuration
* Select Manual Configuration
-
 
+
[[File:Phonerlite-wiz1.png]]
* '''Proxy/Registrar:''' newyork.voip.ms (or any other voip.ms server)
* '''Proxy/Registrar:''' newyork.voip.ms (or any other voip.ms server)
Line 12: Line 12:
Click '''Next'''
Click '''Next'''
-
 
+
[[File:Phonerlite-wiz2.png]]
Line 21: Line 21:
Click '''Next'''
Click '''Next'''
-
 
+
[[File:Phonerlite-wiz3.png]]
* Select your audio capture and playback devices
* Select your audio capture and playback devices
* Click '''Next'''
* Click '''Next'''
 +
 +
[[File:Phonerlite-wiz4.png]]
* Click '''Finish''' check box to save your profile
* Click '''Finish''' check box to save your profile
Line 32: Line 34:
-
(Optional fine tuning)
+
('''Optional fine tuning''')
-
Note: Whenever you make changes make sure to click the '''Save''' button to save them to your profile.
+
Under '''''Server''''' you can change register time to voip.ms recommended 180 seconds.
-
Under ''Server'' you can change register time to voip.ms recommended 180 seconds.
+
Under '''''Codecs''''' turn off silence detection.
-
 
+
-
Under ''Codecs'' turn off silence detection.
+
If you use headset you can set echo cancellation to 0 otherwise leave default.
If you use headset you can set echo cancellation to 0 otherwise leave default.
Default codec selection is adequate and will use highest quality g.711. If you have low bandwidth try unchecking g711 so calls default to GSM (make sure GSM is also checked on voip.ms server config).  g.729 is not supported in this softphone.
Default codec selection is adequate and will use highest quality g.711. If you have low bandwidth try unchecking g711 so calls default to GSM (make sure GSM is also checked on voip.ms server config).  g.729 is not supported in this softphone.
 +
 +
Note: Whenever you make changes make sure to click the '''Save''' button to save them to your profile.

Revision as of 19:16, 22 April 2011

Configuration Details

Phonerlite-wiz1.png

Click Next

Phonerlite-wiz2.png


Click Next

Phonerlite-wiz3.png

Phonerlite-wiz4.png


(Optional fine tuning)

Under Server you can change register time to voip.ms recommended 180 seconds.

Under Codecs turn off silence detection.

If you use headset you can set echo cancellation to 0 otherwise leave default. Default codec selection is adequate and will use highest quality g.711. If you have low bandwidth try unchecking g711 so calls default to GSM (make sure GSM is also checked on voip.ms server config). g.729 is not supported in this softphone.

Note: Whenever you make changes make sure to click the Save button to save them to your profile.

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox