Panasonic KX-TGP 550 - Wiki

Panasonic KX-TGP 550

From Wiki

Revision as of 01:39, 10 August 2011 by Billfernandez (Talk | contribs)
Jump to: navigation, search
Panasonic KX-TGP 550

Configuration Details

Complete the following fields:

The default registration expiry time on this device is 3600 seconds. You may have to reduce that if you lose registration. Unfortunately, that can not be set on the web interface. You need to load a provisioning configuration file from a web or FTP server. The parm is REG_EXPIRE-n=mmm, where n is line number, and mmm is the registration interval. e.g. REG_EXPIRES_1=300 to set line 1 registration time to 300 seconds. A symptom of this problem is that the telephone web interface shows that the line is registered, but the control panel indicates that it is not registered. This device supports multiple provisioning files in a hierarchy.

The "Phone Number" field may contain only digits, and *must* contain at least one digit, or the base unit won't try to register it. Within those restrictions it can be any number you want. When using the handset (or base unit) to select a line from which to dial, this number will be displayed next to the entry for the associated line. I think Panasonic's idea is that this is supposed to be a DID associated with the SIP address, but it doesn't have to be.

Enter your SIP username in the "Line ID" field and again in the "Authentication ID" field. If you are registering a main account your SIP username will be your six-digit account number. If you are registering a sub-account it will be your main account number followed by an underscore followed by the sub-account number.

You can register at any server (e.g. "") but you must enter your chosen server name in the "Registrar Server Address" and "Proxy Server Address" and "Service Domain" fields.

After saving these settings, check the "VoIP Status" page in the "Status" section to see if the status of this line is "registered". This product can register up to eight SIP addresses at once. If any of the SIP addresses you configured into the device do not show their status on this page as being "registered", then the status light on the base unit will flash yellow. (This is not mentioned in either the user guide nor the admin guide for this product.)

The above information applies to both the TGP-550 (where the base unit has a handset, dialpad, LCD display, etc.) and the TGP-500 (where the base unit is a faceless black box that sits in your network closet).

Personal tools
Actions Wiki Blog
Guides (English)
Guides (Français)
Guías (Español)