OBi300 - VoIP.ms Wiki

OBi300

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[checked revision][checked revision]
(Created page with "OBi 300 '' The OBi100 & OBi200 are perfect for customer...")
(Configuration for usage with call encryption TLS/SRTP)
Line 94: Line 94:
== Configuration for usage with call encryption TLS/SRTP ==
== Configuration for usage with call encryption TLS/SRTP ==
 +
 +
===Configuring a Voice line using TLS===
 +
 +
'''NOTE''': This section is optional. It explains in detail how to use encrypted traffic in the device. If you are not certain about how encrypted traffic works, or the benefits of encrypting SIP traffic, please contact technical support for more information.
 +
 +
These devices are compatible with TLS, however, some settings need to be adjusted to have it working. This section will be assuming that your SIP account is already enabled to use TLS, if you have not enabled it yet, please follow these instructions before going further:
 +
 +
For more information on how to enable encrypted traffic for the main account, please click on [[Call_Encryption_-_TLS/SRTP#Activate_This_Option_on_Your_Main_Account | Main account]] or more information on how to enable encrypted traffic for the sub-account [[Call_Encryption_-_TLS/SRTP#Activate_This_Option_on_Your_Sub_Account | sub account]]
In order to use TLS/call encryption with OBi devices, you'll need to modify the following parameters accordingly. Please note that this is only available for some OBi devices, and the screenshots are from the most recent firmware version.
In order to use TLS/call encryption with OBi devices, you'll need to modify the following parameters accordingly. Please note that this is only available for some OBi devices, and the screenshots are from the most recent firmware version.

Revision as of 17:58, 25 February 2020

OBi 300

The OBi100 & OBi200 are perfect for customers who do not have a traditional phone service, yet need a similar solution and want the savings and simplicity of using a VoIP service for all their calls.

To start configuring your device you will need to plug it in to your router/modem via its Internet port with an Ethernet cable and connect a regular handset phone to it's Phone port, then follow the next steps.


Contents

Manual Configuration Details

Start by dialing * * * from the connected phone, then press 1 to confirm your choice, this will return the IP address of your device being a number similar to 192.168.xxx.xxx.

Once you get the IP address, enter it in the URL address bar "http://" of your Internet Browser to get access to the Graphic User Interface of the OBi100.

If done properly, the following window should appear on your screen:

Obi300 Login.png


Once you get the Authentication Required window you will be prompted for a User Name and Password, the default credentials are:

User Name: admin

Password: admin

After this, you should now be able to see the OBi Web interface.

Now on the left side of the screen please find the next options and follow the next steps:

Disabling auto-provisioning

**NOTE : You may use this guide to configure an OBi110 as well. This is the VoIP.ms recommended configuration versus using the Obihai configuration dashboard (more on this later on this page) and you may also not find all new VoIP.ms servers on the Obihai Dahsboard. In order to make sure there will be no conflicts between this Manual configuration and the Obihai dashboard, please perform the following steps to disable auto-provisioning:


Please note you must remove the check mark from the "default" column, then under "Method" please use the 'Drop Down Selection' and choose Disabled.
Disabling Auto Provisioning


After this, save all changes and you are ready to move on to the actual configuration.

Configuring the ITSP Profile

General Section

In this section you will set the name and the DigiMap you will use in the profile you configure. By default you will configure the profile A, unless you use the same device with another provider.

Name: 100000 (Replace with your 6 digit Main SIP account UserID or Sub Account user name, i.e. 123456 or 123456_sub)
DigitMap: Copy the line, including parenthesis, in the Digitmap field in the ITSP Profile and replace the "555" digits in the following lines by the area code of your choice:
Dial Plan (recommended):
(1xxxxxxxxxx|<1555>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|911|011xx.|xx.|*xx.|***xxx|4xxx|(Mipd)|[^*]@@.) 

Also, some clients have been successful by dialing **1 and *97 for line 1 or **2 and *97 for line 2.

  • If you need to set the dial plan back to Default, you can use this:
(1xxxxxxxxxx|<1>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|011xx.|***xxx|xx.|(Mipd)|[^*]@@.) 
ITSP profile, General - click to enlarge


SIP Section

In this section you can set the server and the port that you wish to register to.

Please note that in order to change the settings, you need to uncheck the Default box on the right hand side. 
ITSP profile, SIP - click to enlarge


Additionally, you may want to change the RegisterExpires value to 300, scroll down, deselect the default box and set the value there from 3600 to 300.

ITSP profile, SIP (Register Expires)- click to enlarge


Configuring Voice Services


In this section you can set your Main account/sub_account credentials like User name and Password. The Main account password by default is the same password as the Customer Portal.

Voice Services (SIP Credentials) - click to enlarge


Once you have finished changing all those settings, click on the button Submit to save the changes and reboot your OBi device,  your device should now be registered.

Configuration for usage with call encryption TLS/SRTP

Configuring a Voice line using TLS

NOTE: This section is optional. It explains in detail how to use encrypted traffic in the device. If you are not certain about how encrypted traffic works, or the benefits of encrypting SIP traffic, please contact technical support for more information.

These devices are compatible with TLS, however, some settings need to be adjusted to have it working. This section will be assuming that your SIP account is already enabled to use TLS, if you have not enabled it yet, please follow these instructions before going further:

For more information on how to enable encrypted traffic for the main account, please click on Main account or more information on how to enable encrypted traffic for the sub-account sub account

In order to use TLS/call encryption with OBi devices, you'll need to modify the following parameters accordingly. Please note that this is only available for some OBi devices, and the screenshots are from the most recent firmware version.

Under Service Providers > ITSP Profile > SIP use the following values:

ProxySeverPort: 5061
ProxyServerTransport: TLS
RegistrarServerPort: 5061
OutboundProxyPort: 5061
X_OutboundProxyTransport: TLS
ITSP profile, SIP (TLS)- click to enlarge


Under Voice Services > SP Service use the following values:

X_KeepAliveServerPort: 5061
X_SRTP: Use SRTP Only
Voice Services, SP Service (SRTP)- click to enlarge


Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox