Microsip - VoIP.ms Wiki


From VoIP.ms Wiki

Jump to: navigation, search

This is the very basic set up for MicroSIP, there are only 3 steps needed to have your device up and running. If you wish to improve your softphone performance or enable some features, refer to the advanced section.


Basic setup

Step 1 - Download and install MicroSIP from this link. Note we have used the latest version which is currently MicroSIP-Lite-3.19.31

Step 2 - Once downloaded and installed, start MicroSIP and on the welcome screen head onto the arrow pointing down on the top right of the softphone application > Edit Account.

Click to enlarge

Step 3 - Fill all the following information:

- Account Name: VoIPms
- SIP Server: The server you wish to connect to. Please consult current link in order to see the list of all of our servers
- SIP Proxy: Exact same information that was set in SIP Server
- Username: Your main VoIP.ms account number or sub-account
- Domain: The same information you have filled in SIP Server and SIP Proxy
- Password: your main SIP/IAX password* or sub-account password
- Display Name: Your name or company name

Then press saved and you are done configuring MicroSIP.

Click to enlarge

Additional Settings


In order to enable TLS SRTP (call encryption), you will first need to enable this feature by modifying your main account under Main Menu > Account Settings > Advanced tab and setting Encrypted SIP Traffic to Yes

Once done, go into the menu option (arrow pointing down) on the top right of MicroSIP > Edit Account and set the following options:

- Media Encryption: Mandatory SRTP
- Transport: TLS
Click to enlarge

Save and then head once again on the top right of MicroSIP > Settings and once there, modify Source Port option to 5061 and RTP to 10001 to 20000.

Save these settings and you will now

Click to enlarge

Some additional settings

By heading into the menu option (arrow pointing down) on the top right of MicroSIP > Settings there are some settings that can be improved in order to avoid any issues while on a call:

- Enabled Codecs: Only have G711u allowed (or GSM if you have a slow internet connection)
- Source port: Set it to 5060 (5080 or 42872 for alternate ports) or 5061 (5081 or 42873 for alternate ports) for call encryption
- RTP Ports: Set the minimum to 10001 and maximum to 20000
- EC: Make sure this option is enabled. This is an Echo Cancellation option

Otherwise, there are many other options that you can customize like the ring tone you will hear when someone calls among many other options you can customize or enable that you can have a look into. You can also consult link if you have doubts on the options MicroSIP offers.

Personal tools
VoIP.ms Wiki
VoIP.ms Blog
Guides (English)
Guides (Français)
Guías (Español)