Linphone iOS - VoIP.ms Wiki

Linphone iOS

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[draft revision][draft revision]
(Created page with "==Configuration Detail== * Open Linphone File:LinphoneiOS1.jpeg * Select the option '''Use SIP Account'''. File:LinphoneiOS2.jpeg * Fill in the information accordin...")
Line 31: Line 31:
* In order to receive incoming calls all the time enable "Push Notification" and set 300 for "Expire".
* In order to receive incoming calls all the time enable "Push Notification" and set 300 for "Expire".
 +
 +
[[File:LinphoneiOSNetworkSettings.jpeg]]
 +
 +
* For better results, in the Network settings of Linphone disable the option "Random port" and set the port 5060, 5080 or 42872 (For encryption 5061, 5081 or 42873). Also, set the range 10000 - 20000 for the Audio ports.
 +
 +
== Configuring Linphone with Encryption ==
 +
 +
[[File:LinphoneiOSTLS1.jpeg]] [[File:LinphoneiOSTLS2.jpeg]]
 +
 +
* To use Encryption with Linphone you have to select TLS as the transport type when adding the account.
 +
* If the account is already added go to the Account settings in Linphone so you can edit this option.
 +
 +
[[File:LinphoneiOSSRTP0.jpeg]]
 +
 +
* Finally, from the Call settings in Linphone set "Media encryption" to SRTP and enable "Media encryption mandatory".
 +
 +
[[category:softphones]]

Revision as of 19:54, 24 November 2020

Configuration Detail

LinphoneiOS1.jpeg


LinphoneiOS2.jpeg

Note: atlanta1.voip.ms can be replaced with any of the servers available with voip.ms. You can see the list here.

Additional configuration

LinphoneiOS3.jpeg

LinphoneiOSNetworkSettings.jpeg

Configuring Linphone with Encryption

LinphoneiOSTLS1.jpeg LinphoneiOSTLS2.jpeg

LinphoneiOSSRTP0.jpeg

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox