Grandstream DP750/DP720

From VoIP.ms Wiki

[quality revision]

[quality revision]

Revision as of 17:50, 16 October 2020 (view source) Scomtois (Talk | contribs) ← Older edit		Revision as of 14:21, 3 November 2020 (view source) B13n (Talk | contribs) Newer edit →
Line 1:		Line 1:
-	== Grandstream DP750 Configuration Detail ==	+	== Grandstream DP750 Configuration Detail (Applies to model DP752 too) ==
	[[File:DP750-720.png|thumb|none|600px]]		[[File:DP750-720.png|thumb|none|600px]]

---

Revision as of 14:21, 3 November 2020

Grandstream DP750 Configuration Detail (Applies to model DP752 too)

1. Type the DP715 Base Station IP address in your PC browser e.g. http://192.168.2.1

2. Log in using username and password of "admin" to configure the DP750 Base Station.

3. Navigate to the Profiles > Profiles 1, and select ' General Settings '.

• Select a name. This is only for your own use.
• One of VoIP.ms multiple servers, you can choose the one closest to your location
• Click on the Save and Apply button.

4. Navigate to the SIP Settings > Basic Settings menu on the left.

• Select either UDP, or if your account is configured to use SRTP encryption, select TLS/TCP.
• Set the Local SIP Port to 5060 for UDP, if your account is configured to use SRTP encryption, use the port 5061.
• Click on the Save and Apply button.

5. Navigate to the Profiles > Profile 1 > Audio Settings.

• Select both In-Audio and via RTP for the send DTMF option.

• If you are using SRTP / TLS/TCP, ensure the SRTP Mode option is set to Enabled and Forced.
• Click on the Save and Apply button.

6. Navigate to DECT > Sip Account Settings.

• In the Account 1 line, enter your SIP User ID into both the SIP User ID and Authenticate ID fields.
• Enter the password for the SIP account in the password field.
• Enter a name for the SIP account in the Name field. This your Outbound Caller ID Name when you call a Canadian number which will be displayed on the Display screen.

• Click on the Save and Apply button.

IMPORTANT INFO FOR CALLER ID NAME: 
  - We suggest entering your outbound Caller ID Name must be in capital letters. This will appears more clearly/visible on some devices.
  - You must NOT use any special characters, they will not be displayed. 
  - Some of regular Canadian providers will not show more than 15 characters. We suggest shrinking or adapt your caller ID. 
  - Spaces are allowed in a caller id name.

7. Navigate to DECT > Handset Line Settings.

• Ensure the SIP account that you created in step 6 is select in the Line 1 column for each handset.
• Click on the Save and Apply button.

Guide Links

In the event where you need the guides directly from Grandstream, you may find the user and admin manual guides below:

User Manual : Download PDF

Admin Manual : Download PDF