Dialing Codes - VoIP.ms Wiki

Dialing Codes

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[quality revision][quality revision]
(Undo revision 6120 by Carlb (talk))
(22 intermediate revisions not shown)
Line 1: Line 1:
-
[http://voip.ms/ VoIP.ms] has different dialing codes depending on the destination you want to reach, and you can use these codes from your main or sub account depending on your needs. There are two main distinctions between the routes when dialing, local and international calls, it is important to mention, calls to United States 48 (except Hawaii & Alaska) and Canada are considered as local calls. All the other destinations will be considered as International and will use the corresponding route.
+
[http://voip.ms/ VoIP.ms] has different dialing codes depending on the destination you want to reach, and you can use these codes from your main or sub account depending on your needs. It is important to mention that there are two main distinctions between the routes when dialing local and international calls. Calls to United States 48 (except Hawaii & Alaska) and Canada are considered local calls. All the other destinations will be considered International and will use the corresponding route.
== Local calls (USA48/Canada) ==
== Local calls (USA48/Canada) ==
-
For calls to USA48 & Canada, you only need to dial the complete 10 digits number, optionally you can dial using 11 digits, adding the prefix 1 before the number. From the [[Account Settings]] >> Account Routing, it can be set a route for these calls, there is an option to use value or premium route.  
+
For calls to USA48 & Canada, you only need to dial the complete 10 digits number, optionally you can dial using 11 digits, adding the prefix 1 before the number.  
-
*Value: USA 48 $0.0105 - Canada starting at $0.0052
+
Example: 1514-316-xxxx or 514-316-xxxx (do not use the dashes when dialing)
-
*Premium: USA 48 / Canada $0.0125. ''Note (except Yukon, North West Territories & Nunavut are considered in this section but have a different rate (value at $ 0.0102 & premium at $0.0260).''
+
On the case of Canada, from the Account Settings >> Account Routing, it can be set a route for these calls, there is an option to use value or premium route, and also, it's possible to switch the routing the call will use by dialing the prefix 033 (Value) and 044 (Premium) followed by the 11 digits number. The US is only available on the Premium route.
-
  Example 1514-316-xxxx or 514-316-xxxx (do not use the dashes when dialing)
+
*033 + 1 + Area Code + number: Canada Value (override account setting)
 +
 
 +
*044 + 1 + Area Code + number: Canada Premium (override account setting)
 +
(+ signs used as reference only. Do not include + signs when dialing)
 +
 
 +
Cost with the '''Canada''' '''Value''' route: Starting at $0.0052
 +
Cost with the '''Canada''' '''Premium''' route: $0.0100.
 +
Cost with the '''USA48''' route ('''Premium'''): $0.0100.
 +
 +
''Note (except Yukon, North West Territories & Nunavut are considered in this section but have a different rate (value at $ 0.0102 & premium at $0.0260).''
'''USA48: The contiguous United States are the 48 U.S. states on the continent of North America that are south of Canada, plus the District of Columbia. The term excludes the states of Alaska and Hawaii, and all off-shore U.S. territories and possessions, such as Puerto Rico.
'''USA48: The contiguous United States are the 48 U.S. states on the continent of North America that are south of Canada, plus the District of Columbia. The term excludes the states of Alaska and Hawaii, and all off-shore U.S. territories and possessions, such as Puerto Rico.
Line 23: Line 32:
For dialing to countries outside US & Canada, we can follow these codes:
For dialing to countries outside US & Canada, we can follow these codes:
-
*011+Country Code+number: International
+
*011 + Country Code + number: International
-
*00+Country Code+number: International
+
*00 + Country Code + number: International
-
*033+Country Code+number: International Value (override account setting)
+
*033 + Country Code + number: International Value (override account setting)
-
*044+Country Code+number: International Premium (override account setting)
+
*044 + Country Code + number: International Premium (override account setting)
(+ signs used as reference only. Do not include + signs when dialing)
(+ signs used as reference only. Do not include + signs when dialing)
 +
 +
''' You can confirm the area code of the city you wish to reach on the next link: http://www.flightpedia.org/dialcodes.html
  Example Dialing to Mexico: 011+country code+number 011-52-9999xxxxxx (do not use the dashes when dialing)
  Example Dialing to Mexico: 011+country code+number 011-52-9999xxxxxx (do not use the dashes when dialing)
Line 42: Line 53:
If you don't have access to our VoIP network and would like to check your Voicemail, you can simply dial your number. Once the Voicemail system answers your call, press the asterisk key (*).
If you don't have access to our VoIP network and would like to check your Voicemail, you can simply dial your number. Once the Voicemail system answers your call, press the asterisk key (*).
 +
 +
=== Account Balance ===
 +
 +
Dial *225 (*bal): This code allow you to access your VoIP.ms Account Balance. It can be Enable or Disable on [[Sub Accounts]].
=== SIP Broker Peering ===
=== SIP Broker Peering ===
Line 59: Line 74:
=== iNums ===  
=== iNums ===  
-
iNums can be ordered for free from your account, on the order did section, one iNum is available per account and calls (incoming & outgoing) are free of charge. You can get more information also at http://www.inum.net/. iNum stands for international Number, making use of the +883 global country code. iNums are reachable from a growing list of providers.  
+
iNums can be ordered for free from your account, on the order DID section, one iNum is available per account and calls (incoming & outgoing) are free of charge. You can get more information also at http://www.inum.net/. iNum stands for international Number, making use of the +883 global country code. iNums are reachable from a growing list of providers.  
  Example 011+883+iNum or 00+883+iNum: 011-883-51000134xxxx (do not use the dashes when dialing)
  Example 011+883+iNum or 00+883+iNum: 011-883-51000134xxxx (do not use the dashes when dialing)
Line 77: Line 92:
'''Important Notes:'''
'''Important Notes:'''
-
* The services can only be Called from Canadian servers. There are plans on adding service codes to US servers as soon as possible.
+
* The services can only be Called from Canadian servers. There are plans on adding service codes to US servers as soon as possible. This doesn't apply to the 411 service.
* The services rely on your [http://wiki.voip.ms/article/Caller_ID CallerID] to route your call to the proper service line, therefore, some services may not be supported in your province or for your specific area.
* The services rely on your [http://wiki.voip.ms/article/Caller_ID CallerID] to route your call to the proper service line, therefore, some services may not be supported in your province or for your specific area.
* The are no charges applied to your account when you call 311, 511 or 811.
* The are no charges applied to your account when you call 311, 511 or 811.
Line 83: Line 98:
== Canada 310 service ==
== Canada 310 service ==
-
Exchange 310 is a special code, these numbers are only reachable from the area where they belong, from the service, you will need to dial only the 7 digits to properly reach these numbers, pass a valid Canadian [http://wiki.voip.ms/article/Caller_ID CallerID] and be registered in Chicago, Seattle or any of the Canadian servers.
+
Exchange 310 is a special code, these numbers are only reachable from the area where they belong, from the service, you will need to dial only the 7 digits to properly reach these numbers, pass a valid Canadian CallerID and be registered in Chicago, Seattle or any of the Canadian servers.
-
Example: Dial 310-xxxx (do not use the dashes when dialing), if you pass a caller id 514, is like if you were dialing 514-310-xxxx c'est
+
Example: Dial 310-xxxx (do not use the dashes when dialling), if you pass a caller id in area code 514, dialling seven digits 310-xxxx is like dialling 514-310-xxxx.
-
          comme si vous étiez composant le 514-310-xxxx
+

Revision as of 17:18, 29 November 2013

VoIP.ms has different dialing codes depending on the destination you want to reach, and you can use these codes from your main or sub account depending on your needs. It is important to mention that there are two main distinctions between the routes when dialing local and international calls. Calls to United States 48 (except Hawaii & Alaska) and Canada are considered local calls. All the other destinations will be considered International and will use the corresponding route.

Contents

Local calls (USA48/Canada)

For calls to USA48 & Canada, you only need to dial the complete 10 digits number, optionally you can dial using 11 digits, adding the prefix 1 before the number.

Example: 1514-316-xxxx or 514-316-xxxx (do not use the dashes when dialing)

On the case of Canada, from the Account Settings >> Account Routing, it can be set a route for these calls, there is an option to use value or premium route, and also, it's possible to switch the routing the call will use by dialing the prefix 033 (Value) and 044 (Premium) followed by the 11 digits number. The US is only available on the Premium route.

(+ signs used as reference only. Do not include + signs when dialing)

Cost with the Canada Value route: Starting at $0.0052 
Cost with the Canada Premium route: $0.0100. 
Cost with the USA48 route (Premium): $0.0100.

Note (except Yukon, North West Territories & Nunavut are considered in this section but have a different rate (value at $ 0.0102 & premium at $0.0260).

USA48: The contiguous United States are the 48 U.S. states on the continent of North America that are south of Canada, plus the District of Columbia. The term excludes the states of Alaska and Hawaii, and all off-shore U.S. territories and possessions, such as Puerto Rico.

International calls

There are different codes that can be used to dial International numbers (Outside US48 & Canada). Hawaii and Alaska are considered in this section, since any change made on the Account Settings >> Account Routing for International calls, will affect also these destinations, this means if we set to use premium route, calls to these destinations will use also premium route, but they can be dialed as local US numbers (10 or 11 digits).

Note: Some International destinations can be dialed using only the prefix 1, this applies for countries part of the NANPA. 011 & 00 are for the rest of countries. 
E.g. when dialing Hawaii, Alaska, Caribbean countries an U.S. Territories. 

For dialing to countries outside US & Canada, we can follow these codes:

(+ signs used as reference only. Do not include + signs when dialing)

You can confirm the area code of the city you wish to reach on the next link: http://www.flightpedia.org/dialcodes.html

Example Dialing to Mexico: 011+country code+number 011-52-9999xxxxxx (do not use the dashes when dialing)

Special codes

Some special codes that you can use with the service:

Voicemail Access Codes

*97 to access directly the Mailbox associated to the account you are dialing from. (Will prompt for Password only)

*98 to access your Voicemail and choose one of your Mailbox accounts. (Will prompt for Mailbox ID and Password)

If you don't have access to our VoIP network and would like to check your Voicemail, you can simply dial your number. Once the Voicemail system answers your call, press the asterisk key (*).

Account Balance

Dial *225 (*bal): This code allow you to access your VoIP.ms Account Balance. It can be Enable or Disable on Sub Accounts.

SIP Broker Peering

Dial **275 SIP Broker Peering (e.g: **275*011188888): This code can be used for outbound calls via SIP broker.

If you want to receive calls, you will need a DID number (US/Canada) and you can use the following format *9780didnumber@sipbroker.com.

You can also access this link for more information http://sipbroker.com/sipbroker/action/login

Echo & DTMF test

4443 (Echo Test): This code is used to access the echo test, with a new account this code can be dialed even without funds, it is useful to verify the quality on your line.

4747 (DTMF Test): This code is used to access the dtmf test, with a new account this code can be dialed even without funds, it is useful to verify if the dtmf is configured properly.

iNums

iNums can be ordered for free from your account, on the order DID section, one iNum is available per account and calls (incoming & outgoing) are free of charge. You can get more information also at http://www.inum.net/. iNum stands for international Number, making use of the +883 global country code. iNums are reachable from a growing list of providers.

Example 011+883+iNum or 00+883+iNum: 011-883-51000134xxxx (do not use the dashes when dialing)

Service codes for Canada

1-555-555-0911: Test CallerID and e911 Test: to test if your caller Id is working properly you can dial this number, also this recording will let you know if your number is activated with the e911 service.

411: Directory Assistance (Must be enabled in Account Settings), when enabled users can dial the directory assistance at a cost of $0.99 per call.

311: Non-Emergency Police, Municipal and Other Governmental Services (Canadian Servers)

511: Provision of Weather and Traveler Information Services (Canadian Servers)

811: Non-Urgent Health Teletriage / telehealth Services (Canadian Servers)

Important Notes:

Canada 310 service

Exchange 310 is a special code, these numbers are only reachable from the area where they belong, from the service, you will need to dial only the 7 digits to properly reach these numbers, pass a valid Canadian CallerID and be registered in Chicago, Seattle or any of the Canadian servers.

Example: Dial 310-xxxx (do not use the dashes when dialling), if you pass a caller id in area code 514, dialling seven digits 310-xxxx is like dialling 514-310-xxxx.

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox