Dial Plan for Linksys ATAs
From VoIP.ms Wiki
Voip.ms recommended dial plan:
Note: Replace 555 by the area code of your choice. If you want to have the 7 dial for your area code.
This guide has been created in order to help you learn more about the Dial Plan and also you can customize it according to your preferences. Please note that customizing your dial plan is optional.
What is a Dial Plan?
The dial plan is a string of characters that determine how the digits input in your keypad are interpreted and transmitted by your ATA device. It also determines whether or not to accept or reject a call. A dial plan thus facilitates dialing, and also the blocking of certain types of calls, such as long distance or international.
Note: Please notice, that you can also block the international calls in your VoIP.ms account.
A dial plan contains a series of digit sequences, separated by the | character and the entire set of sequences is enclosed within parentheses. Each time you press a key in your keypad your ATA device is going to try matching that key with each digit sequence in your dial plan.
|0 1 2 3 4 5 6 7 8 9 * #||You can use any of these characters to represent a key pressed in your keypad.|
|x||This represent any character on the phone.|
|[sequence]|| You can enter characters between brackets to create a list of acceptable digits. |
For example, if you enter the range [1-5], the user may only press the digits from 1 to 5.
You can also use individual numbers, and certain other characters, in combination. For example [35-8*] allows the user to press 3, 5, 6, 7, 8 or *.
|. (period)|| You can use a period to accept zero or more entries of a give digit. |
For example, 01. allows the user to enter 0, 01, 011 and so on.
|<dialed:substituted>|| This is used for sequence substitution, you can use this to indicate that certain numbers dialed are replaced by other characters. The dialed digits can be zero or more characters. |
For example with this sequence <:1555>xxxxxxx if the user dial a 7 digit number, the number 1555 is added to the beginning of the sequence. If the user press 6782345, the system transmits 15556782345.
|, (comma)|| This can be used between digits to play an “outside line” dial tone after a user-entered sequence. |
For example, with this sequence 9, 1x. an “outside line” dial tone is sounded after the user presses 9, and the tone continues until the user presses 1
|! (exclamation point)|| You can use this character to prohibit a dial sequence. |
For example with the sequence 1900xxxxxxx! the system reject any sequence that starts with 1900.
|S0 or L0||Overrides the Short or Long inter-digit timer 0 seconds.|
(where # is the duration of the pause in seconds)
|Pauses # seconds.|
Some examples of dial plan digit sequences:
- To dial any international number without using the 011 prefix.
You can also accomplish this if you set the Dialing Mode to E164 in your Account Settings
- To block a call to a specific area code (replace 555 with the area code you want)
<:1> 555 xxxxxxx !
- The next sequence, allows you to dial your Phone book entries using an speed dial like the POTS provider's. For example if you dial 20# the system will send *7520
<:*75>xx< # : >
- Cisco SPA2100 Phone Adapter
- Cisco SPA2102 Phone Adapter with Router
- Cisco Linksys PAP2
- Cisco Linksys PAP2T