Cisco SPA941 - VoIP.ms Wiki

Cisco SPA941

From VoIP.ms Wiki

Revision as of 19:55, 21 January 2012 by Carlb (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Device Configuration Guides Linksys SPA941 NA


The Linksys SPA941 IP telephone can be configured as a two line or, via a simple software upgrade, a 4 line full phone with pixel based graphical display, speakerphone and headset port.It is configured for DHCP, this means that it gets its IP address from your DHCP server automatically.



STEP 1

Press the Paper "button" and then press number 9 which will take you into the network settings. Option 2 will show you the phone's IP address.

STEP 2

Go to any browser equipped computer on your network and enter the address: http://<IP ADDRESS HERE>/


STEP 3

Click on the "Admin Login" button near the top right side of the screen, then click on the "Ext 1" tab.

Linksys-942-2.gif


STEP 4

You need to modify only a few parameters from the factory default. They are listed here:

Linksys SPA941 Configurationjpg.jpg

STEP 5

If the second extension is needed, click on Ext2 and repeat Step 4.

STEP 6

You are ready to make some test and calls.

Note: We have seen some customers installing the SPA941 behind a firewall which blocks ICMP packets causes problems with registration. Try turning off anything blocking your firewall.

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox