Cisco IP Phone 7940/7960 - Wiki

Cisco IP Phone 7940/7960

From Wiki

Revision as of 18:21, 2 August 2013 by Joevoipms (Talk | contribs)
Jump to: navigation, search
Cisco IP Phone 7940/7960

Note: These devices need to have the latest firmware in order to have the SIP Configuration options mentioned on this article. For more details please contact your Cisco Service or review the following links:

Configuration from the phone's settings menu

  1. Press **# to unlock the Configuration Protection
    • Some firmware versions must be unlocked by pressing the "Settings" button, scrolling down to the "Unlock Phone" option and pressing the "Select" softkey
  2. Press Settings button
  3. Go to "Network Configuration" to set the IP connectivity
  4. Go to SIP Configuration
  5. Select "Line 1"
    1. In Name and Authentication Name enter your username(e.g. 100000)
    2. Enter your password
    3. Enter any of the servers (e.g. as Proxy Address
    4. Configure Preferred Codec to g711u
    5. Press Back
    6. Press Save to apply changes.

As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall if, any.

External Links

Using the Cisco SIP IP Phone Menu Interface[3]

Cisco SIP IP Phone 7960 Administrator Guide [4]

Personal tools
Actions Wiki Blog
Guides (English)
Guides (Français)
Guías (Español)