Cisco IP Phone 7940/7960 - VoIP.ms Wiki

Cisco IP Phone 7940/7960

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[draft revision][draft revision]
(Configuration from the phone's settings menu)
Line 20: Line 20:
##Enter any of the VoIP.ms servers (e.g. atlanta.voip.ms) as '''Proxy Address'''
##Enter any of the VoIP.ms servers (e.g. atlanta.voip.ms) as '''Proxy Address'''
##Configure '''Preferred Codec''' to g711u
##Configure '''Preferred Codec''' to g711u
 +
##In Settings > SIP Configuration > Register Expires (You need to set a timeout < 3600s, please put 180)
 +
##In Settings > SIP Configuration > Register with Proxy set this to YES
##Press '''Back'''
##Press '''Back'''
##Press '''Save''' to apply changes.
##Press '''Save''' to apply changes.
-
'''As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall if, any.'''
+
'''As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall, if any. '''
-
 
+
== External Links ==
== External Links ==

Revision as of 19:14, 4 September 2013

Cisco IP Phone 7940/7960

Note: These devices need to have the latest firmware in order to have the SIP Configuration options mentioned on this article. For more details please contact your Cisco Service or review the following links:


Configuration from the phone's settings menu

  1. Press **# to unlock the Configuration Protection
    • Some firmware versions must be unlocked by pressing the "Settings" button, scrolling down to the "Unlock Phone" option and pressing the "Select" softkey
  2. Press Settings button
  3. Go to "Network Configuration" to set the IP connectivity
  4. Go to SIP Configuration
  5. Select "Line 1"
    1. In Name and Authentication Name enter your VoIP.ms username(e.g. 100000)
    2. Enter your VoIP.ms password
    3. Enter any of the VoIP.ms servers (e.g. atlanta.voip.ms) as Proxy Address
    4. Configure Preferred Codec to g711u
    5. In Settings > SIP Configuration > Register Expires (You need to set a timeout < 3600s, please put 180)
    6. In Settings > SIP Configuration > Register with Proxy set this to YES
    7. Press Back
    8. Press Save to apply changes.

As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall, if any.

External Links

Using the Cisco SIP IP Phone Menu Interface[3]

Cisco SIP IP Phone 7960 Administrator Guide [4]

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox