Cisco IP Phone 7940/7960 - VoIP.ms Wiki

Cisco IP Phone 7940/7960

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[draft revision][draft revision]
m (Configuration from the phone's settings menu)
m
Line 18: Line 18:
'''As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall if, any.'''
'''As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall if, any.'''
 +
 +
 +
== External Links ==
 +
 +
 +
 +
[[Category: SIP phones]]
[[Category: SIP phones]]

Revision as of 21:03, 31 July 2013

Cisco IP Phone 7940/7960

Configuration from the phone's settings menu

  1. Press **# to unlock the Configuration Protection
    • Some firmware versions must be unlocked by pressing the "Settings" button, scrolling down to the "Unlock Phone" option and pressing the "Select" softkey
  2. Press Settings button
  3. Go to "Network Configuration" to set the IP connectivity
  4. Go to SIP Configuration
  5. Select "Line 1"
    1. In Name and Authentication Name enter your VoIP.ms username(e.g. 100000)
    2. Enter your VoIP.ms password
    3. Enter any of the VoIP.ms servers (e.g. atlanta.voip.ms) as Proxy Address
    4. Configure Preferred Codec to g711u
    5. Press Back
    6. Press Save to apply changes.

As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall if, any.


External Links

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox