Cisco IP Phone 7940/7960 - VoIP.ms Wiki

Cisco IP Phone 7940/7960

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[draft revision][draft revision]
(Configuration Details)
m (Configuration from the phone's settings menu)
Line 4: Line 4:
==Configuration from the phone's settings menu==
==Configuration from the phone's settings menu==
-
1. Press '''**#''' to unlock the '''Configuration Protection''' (some versions can also be unlocked pressing the "settings" button, scroll all the way to the bottom to the "unlock phone" option and then press the "select" softkey).
+
#Press '''**#''' to unlock the '''Configuration Protection'''  
-
 
+
#*Some firmware versions must be unlocked by pressing the '''"Settings"''' button, scrolling down to the '''"Unlock Phone"''' option and pressing the '''"Select"''' softkey
-
2. Press '''Settings''' button
+
#Press '''Settings''' button
-
 
+
#Go to '''"Network Configuration"''' to set the IP connectivity
-
 
+
#Go to SIP Configuration
-
3. Go to '''"Network Configuration"''' to set the IP connectivity
+
#Select '''"Line 1"'''
-
 
+
##In '''Name''' and '''Authentication Name''' enter your VoIP.ms username(e.g. 100000)
-
 
+
##Enter your VoIP.ms password
-
4. Go to SIP Configuration
+
##Enter any of the VoIP.ms servers (e.g. atlanta.voip.ms) as '''Proxy Address'''
-
 
+
##Configure '''Preferred Codec''' to g711u
-
 
+
##Press '''Back'''
-
5. Select Line 1
+
##Press '''Save''' to apply changes.
-
 
+
-
* In '''Name''' and '''Authentication Name''' enter your VoIP.ms username(e.g. 100000)
+
-
 
+
-
* Enter your VoIP.ms password
+
-
 
+
-
* Enter any of the VoIP.ms servers (e.g. atlanta.voip.ms) as '''Proxy Address'''
+
-
 
+
-
* Configure '''Preferred Codec''' to g711u
+
-
 
+
-
* Press '''Back''' and then '''Save''' to apply changes.
+
-
 
+
'''As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall if, any.'''
'''As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall if, any.'''
[[Category: SIP phones]]
[[Category: SIP phones]]

Revision as of 20:54, 5 July 2012

Cisco IP Phone 7940/7960

Configuration from the phone's settings menu

  1. Press **# to unlock the Configuration Protection
    • Some firmware versions must be unlocked by pressing the "Settings" button, scrolling down to the "Unlock Phone" option and pressing the "Select" softkey
  2. Press Settings button
  3. Go to "Network Configuration" to set the IP connectivity
  4. Go to SIP Configuration
  5. Select "Line 1"
    1. In Name and Authentication Name enter your VoIP.ms username(e.g. 100000)
    2. Enter your VoIP.ms password
    3. Enter any of the VoIP.ms servers (e.g. atlanta.voip.ms) as Proxy Address
    4. Configure Preferred Codec to g711u
    5. Press Back
    6. Press Save to apply changes.

As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall if, any.

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox