Cisco IP Phone 7940/7960 - VoIP.ms Wiki

Cisco IP Phone 7940/7960

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[quality revision][draft revision]
m
m (Configuration Details)
Line 29: Line 29:
'''As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the IP address of Router or firewall if, any.'''
'''As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the IP address of Router or firewall if, any.'''
 +
[[Category: SIP phones]]

Revision as of 04:56, 15 December 2011

Cisco IP Phone 7940/7960

Configuration Details

1. Press **# to unlock the Configuration Protection (some versions can also be unlocked pressing the "settings" button, scroll all the way to the bottom to the "unlock phone" option and then press the "select" softkey).

2. Press Settings button


3. Go to "Network Configuration" to set the IP connectivity


4. Go to SIP Configuration


5. Select Line 1


As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the IP address of Router or firewall if, any.

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox