Calling Queues - VoIP.ms Wiki

Calling Queues

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[quality revision][quality revision]
(Log in or log out to the queue as Dynamic Member)
(Music)
 
(10 intermediate revisions not shown)
Line 3: Line 3:
== Concept ==
== Concept ==
-
If you want a solution to manage your incoming calls, and have your customer(s) waiting on the line while an agent picks up the call, you need to create a Calling Queue entry, this will permit you to have many calls on hold, queued calls in First In, First Out order until agents become available.
+
If you want a solution to manage your incoming calls and have your customer(s) waiting on the line until an agent picks up the call, you can create a Calling Queue entry. This will permit you to have many calls on hold, queued calls in First In, First Out order until agents become available.
Queues consist of:
Queues consist of:
Line 13: Line 13:
*Announcements for members and callers
*Announcements for members and callers
-
Agents are the people (or person) that answers the call(s) that have been placed into a specific Queue. An agent logs in indicating that s/he is now ready to take calls. Transfers an inbound call to a queue, which is then in turn transferred to an available agent.
+
Agents are the people (or person) that answers the call(s) that have been placed into a specific Queue. An agent logs in indicating that they are now ready to take calls. An inbound call is sent to a queue, which is then in turn transferred to an available agent.
-
The members in the queue can be static or dynamic. The '''Static Members''' are those that are always connected to the queue, on the other hand the '''Dynamic members''' are those that need to log in to the queue in order to take calls.
+
The members in the queue can be static or dynamic. The '''Static Members''' are those that are always connected to the queue and the '''Dynamic members''' are those that need to log in to the queue in order to take calls.
 +
 
 +
Please note that once a call is in the queue, it'll start being billed.  
===  Log in or log out to the queue as Dynamic Member ===
===  Log in or log out to the queue as Dynamic Member ===
----
----
-
If you want get access to your Call queue, dial *11 then at the prompt dial the queue ID and password if you set one. e.g. If I want log in to the "call queue 1" I  dial *11 >> Option 1 >> Password (optional).
+
If you want to get access to your Calling Queue, dial *11 then at the prompt dial the queue ID and password if you set one. e.g. If I want log in to the "call queue 1" I  dial *11 >> Option 1 >> Password (optional).
If you want to log out from the call queue, dial *12 then at the prompt dial the queue ID. e.g. If I want to log out to the "call queue 1" I dial *12 >> Option 1.
If you want to log out from the call queue, dial *12 then at the prompt dial the queue ID. e.g. If I want to log out to the "call queue 1" I dial *12 >> Option 1.
Line 28: Line 30:
Go in to your Customer Portal >> DID Numbers >> Calling Queues
Go in to your Customer Portal >> DID Numbers >> Calling Queues
-
[[File:Screenshot (11h 41m 41s).jpg|400px]]
+
[[File:Screenshot (11h 41m 41s).jpg|thumb|none|600px]]
And then go to "Create New Call Queue"
And then go to "Create New Call Queue"
   
   
-
[[File:Screenshot 2.jpg]]
+
[[File:Screenshot 2.jpg|thumb|none|600px]]
Line 42: Line 44:
-
[[File:Screenshot3.jpg|400px]]
+
[[File:Screenshot3.jpg|thumb|none|600px]]
-
*'''Queue Number''': The number of our Queue, e.g I have my company and I want select the Queue 1 to my sales department, my Queue 2 to my support department. In this way you are sure that your agents receive the calls properly.  
+
*'''Queue Number''': The number of our Queue, e.g I have my company and I want to select the Queue 1 for my sales department, my Queue 2 for my support department. In this way you are sure that your agents receive the calls properly.  
*'''Queue Name''': Enter the name of your Call Queue 1, e.g. "Sales Team".  
*'''Queue Name''': Enter the name of your Call Queue 1, e.g. "Sales Team".  
-
*'''Queue Language''': The language of system announcements. Here, "English" .
+
*'''Queue Language''': The language of system announcements.  
-
*'''Queue Password''': An optional setting - you can preset a password to access to this queue and be sure that only the people authorized for this queue enter it.
+
*'''Queue Password''': An optional setting - you can preset a password to access this queue and be sure that only the people authorized for this queue enter it.
*'''Caller ID Prefix''': Optional: You can optionally prefix the [[Caller ID]].  
*'''Caller ID Prefix''': Optional: You can optionally prefix the [[Caller ID]].  
-
*'''Join Announcement''': If you have a recording for your queue you can set it here. This recording plays when a member enters the queue. e.g. In my company, I have a queue for my sales department, while my customers wait, they hear a recording of all our products and discounts.
+
*'''Join Announcement''': If you have a recording for your queue you can set it here. This recording plays when a member enters the queue. e.g. Having a queue for the company sales department and while the customers wait, they hear a recording of all the products and discounts.
*'''Priority / Weight''': Weight of queue, compared to other queues. If an agent is logged in to more than 1 queue, the higher weighted queue calls that agent.
*'''Priority / Weight''': Weight of queue, compared to other queues. If an agent is logged in to more than 1 queue, the higher weighted queue calls that agent.
Line 62: Line 64:
----
----
-
[[File:Screenshot 4.jpg|400px]]
+
[[File:Screenshot 4.jpg|thumb|none|600px]]
*'''Agent Announcement''': Optionally, you can set a recording to be played to the agent. The caller will be connected to the agent immediately after the announcement.
*'''Agent Announcement''': Optionally, you can set a recording to be played to the agent. The caller will be connected to the agent immediately after the announcement.
Line 75: Line 77:
       -'''Yes:''' Callers can join a queue with no members or only unavailable members.
       -'''Yes:''' Callers can join a queue with no members or only unavailable members.
-
       -'''Strict:''' Callers cannot join a queue with no members or only unavailable members.
+
       -'''Strict:''' Callers cannot join a queue without members or only unavailable members.
-
       -'''No:''' Callers cannot join a queue with no members.
+
       -'''No:''' Callers cannot join a queue without members.
*'''Leave when empty''':  
*'''Leave when empty''':  
        
        
       -'''Yes:''' Callers are sent to the failover when there are no members.  
       -'''Yes:''' Callers are sent to the failover when there are no members.  
-
       -'''Strict:''' Callers are sent to failover if there are members but none of them are available.  
+
       -'''Strict:''' Callers are sent to failover if there are members but none of them are available. This applies to Static members that are not currently registered.
       -'''No:''' Callers will remain in the queue even if there are no members.
       -'''No:''' Callers will remain in the queue even if there are no members.
Line 97: Line 99:
  '''Note:''' Currently only a device with the SIP protocol is able to report his status as 'in use'.
  '''Note:''' Currently only a device with the SIP protocol is able to report his status as 'in use'.
-
*'''Agent Ring Timeout''': Number of seconds in which the call will remain in ringing state, before being considered as timeout.
+
*'''Agent Ring Timeout''': Number of seconds in which the call will remain in ringing state before being considered as 'timeout'.
*'''Retry Timer''': How long the system will wait before trying with all the members again.
*'''Retry Timer''': How long the system will wait before trying with all the members again.
-
*'''Wrap-up Time''': After a successfully call, this setting lets you set the amount of minutes the system will wait before sending the call to a free agent.
+
*'''Wrap-up Time''': After a successful call, this setting lets you set the amount of minutes the system will wait before sending the call to a free agent.
 +
 
 +
===Music===
 +
----
 +
 
 +
 
 +
The following options for music are available:<br/>
 +
 
 +
{| class="wikitable" border: none;"
 +
! colspan="3" | Music on Hold
 +
|-
 +
! scope="col" | Test Code
 +
! scope="col" | Name
 +
! scope="col" | Description
 +
|-
 +
| '''***89'''  || Away in the Tropics ||  From Hawaii to the Caribbean, these tracks deliver sounds of ukulele, steel drums, and steel guitars.
 +
|-
 +
| '''***90'''  || Coffee and Sunrise ||  Uplifting without being perky, and positive without being too smiley.
 +
|-
 +
| '''***91'''  || Coffee Shop Acoustic ||  Soothing, acoustic guitar tracks makes for a relaxed feel and sets a great atmosphere.
 +
|-
 +
| '''***92'''  || Easy Listening || Smooth, casual tunes.
 +
|-
 +
| '''***93'''  || Guitar Alchemy ||  Clever harmonics and progressive chord sequences to create a joyful and warming musical experience.
 +
|-
 +
| '''***94'''  || Happy Endings ||  Uplifting, commercial style. Guitar, drums, ukulele, harmonica and bells.
 +
|-
 +
| '''***95'''  || Light and Casual ||  Soothing and peaceful songs with a light, positive feeling.
 +
|-
 +
| '''***96'''  || Orchestral Moods ||  Emotional and dramatic tales spun by violins, pianos and full orchestras.
 +
|-
 +
| '''***97'''  || Piano Mix ||  Smooth Piano
 +
|-
 +
| '''***98'''  || Rock me Easy ||  Feel-good music to create a relaxing atmosphere.
 +
|-
 +
| '''***99'''  || Spa Sounds ||  Soft, slow and serene instrumentals.
 +
|-
 +
| '''***100'''  || Aucune musique, bip intermittent ||  Silent, but with a subtle intermittent bleep sound to let your callers know that they are still on the line while they hold.
 +
|}
===Announcements and Fail Over===
===Announcements and Fail Over===
----
----
-
[[File:Screenshot 5.jpg|400px]]
+
[[File:Screenshot 5.jpg|thumb|none|600px]]
==== '''Periodic Voice Announcements''' ====
==== '''Periodic Voice Announcements''' ====
Line 119: Line 159:
----
----
-
'''Announce Position frequency''': This setting let you know how often to make any periodic announcement. Optional setting.
+
'''Announce Position frequency''': This setting let's you know how often to make any periodic announcement. Optional setting.
-
'''Announce Round Seconds''': Here you can choose if you want to announce the number of seconds or round to minute. If you want to announce seconds, select the amount to round.
+
'''Announce Round Seconds''': Here you can choose if you want to announce the number of seconds or round to the minute. If you want to announce seconds, select the amount to round to.
'''If Announce position is enabled, do you also want to report estimated hold-time?''': Either yes, no or only once. Hold time will be announced as the estimated time, or less than 2 minutes when appropriate.
'''If Announce position is enabled, do you also want to report estimated hold-time?''': Either yes, no or only once. Hold time will be announced as the estimated time, or less than 2 minutes when appropriate.
Line 139: Line 179:
* '''LEAVEUNAVAIL''': Same as '''LEAVEEMPTY''',except that there were still queue members, but all were with status unavailable (SIP Phone logged out for example)
* '''LEAVEUNAVAIL''': Same as '''LEAVEEMPTY''',except that there were still queue members, but all were with status unavailable (SIP Phone logged out for example)
-
We are finished now click on the Save Queue.
+
Click on the Save Queue when finished.
== Static Members ==
== Static Members ==
Line 151: Line 191:
===Disadvantages===
===Disadvantages===
-
One of disadvantages of the static members is that your members are unable to log out of the queue, they are permanently assigned instead. Other disadvantage is that your members need to use their account or [[Sub Accounts|sub account]] to be in the queue, this could mean that they wouldn't be able to change devices and log into the queue, they would have to use their assigned device.
+
One of the disadvantages of the static members is that your members are unable to log out of the queue, they are permanently assigned instead. Another disadvantage is that your members need to use their account or [[Sub Accounts|sub account]] to be in the queue, this could mean that they wouldn't be able to change devices and log into the queue without using their same credentials.
===Add a Static Member===
===Add a Static Member===
Line 159: Line 199:
-
[[File:Man callqueue.jpg]]
+
[[File:ManageQueues.png|thumb|none|600px]]
-
From there, you need only to click on the link '''Edit Static Members''', that will bring you to the next screen:
+
From there, you need only to click on the yellow '''Edit Static Members''' icon, that will bring you to the next screen:
-
[[File:Queue stamem.jpg]]
+
[[File:StaticMembers.png|thumb|none|600px]]
Line 171: Line 211:
-
[[File:Queue addstatmem.jpg]]
+
[[File:Queue addstatmem.jpg|thumb|none|600px]]
'''Description''': Here you can assign a description to easily identify each member of the queue.
'''Description''': Here you can assign a description to easily identify each member of the queue.
-
'''Account''': Here you select the account or subaccount that is going to be assigned as a member for this queue.
+
'''Account''': Here you select the account or sub account that is going to be assigned as a member for this queue.
'''Priority''': This value can be equal or greater than zero. Available members with lower priority will get the calls first. You can have more than one member with the same priority.
'''Priority''': This value can be equal or greater than zero. Available members with lower priority will get the calls first. You can have more than one member with the same priority.

Latest revision as of 19:57, 3 May 2018

Contents


Concept

If you want a solution to manage your incoming calls and have your customer(s) waiting on the line until an agent picks up the call, you can create a Calling Queue entry. This will permit you to have many calls on hold, queued calls in First In, First Out order until agents become available.

Queues consist of:

Agents are the people (or person) that answers the call(s) that have been placed into a specific Queue. An agent logs in indicating that they are now ready to take calls. An inbound call is sent to a queue, which is then in turn transferred to an available agent.

The members in the queue can be static or dynamic. The Static Members are those that are always connected to the queue and the Dynamic members are those that need to log in to the queue in order to take calls.

Please note that once a call is in the queue, it'll start being billed.

Log in or log out to the queue as Dynamic Member


If you want to get access to your Calling Queue, dial *11 then at the prompt dial the queue ID and password if you set one. e.g. If I want log in to the "call queue 1" I dial *11 >> Option 1 >> Password (optional).

If you want to log out from the call queue, dial *12 then at the prompt dial the queue ID. e.g. If I want to log out to the "call queue 1" I dial *12 >> Option 1.

Configuration

Go in to your Customer Portal >> DID Numbers >> Calling Queues

Screenshot (11h 41m 41s).jpg


And then go to "Create New Call Queue"

Screenshot 2.jpg


Now you are going to start a new configuration:


Queue Information

Screenshot3.jpg


Queue Options


Screenshot 4.jpg
      -Yes: Callers can join a queue with no members or only unavailable members.
      -Strict: Callers cannot join a queue without members or only unavailable members.
      -No: Callers cannot join a queue without members.
      -Yes: Callers are sent to the failover when there are no members. 
      -Strict: Callers are sent to failover if there are members but none of them are available. This applies to Static members that are not currently registered.
      -No: Callers will remain in the queue even if there are no members.

Calls are distributed among the members handling a queue with one of several strategies, defined in queues.conf

   -Ringall:: ring all available channels until one answers.
   -Leastrecent:: ring interface which was least recently called by this queue
   -Fewestcalls:: ring the one with fewest completed calls from this queue
   -Random:: ring random interface
   -Round Robin Memory:: round robin with memory, remember where we left off last ring pass
Note: Currently only a device with the SIP protocol is able to report his status as 'in use'.

Music



The following options for music are available:

Music on Hold
Test Code Name Description
***89 Away in the Tropics From Hawaii to the Caribbean, these tracks deliver sounds of ukulele, steel drums, and steel guitars.
***90 Coffee and Sunrise Uplifting without being perky, and positive without being too smiley.
***91 Coffee Shop Acoustic Soothing, acoustic guitar tracks makes for a relaxed feel and sets a great atmosphere.
***92 Easy Listening Smooth, casual tunes.
***93 Guitar Alchemy Clever harmonics and progressive chord sequences to create a joyful and warming musical experience.
***94 Happy Endings Uplifting, commercial style. Guitar, drums, ukulele, harmonica and bells.
***95 Light and Casual Soothing and peaceful songs with a light, positive feeling.
***96 Orchestral Moods Emotional and dramatic tales spun by violins, pianos and full orchestras.
***97 Piano Mix Smooth Piano
***98 Rock me Easy Feel-good music to create a relaxing atmosphere.
***99 Spa Sounds Soft, slow and serene instrumentals.
***100 Aucune musique, bip intermittent Silent, but with a subtle intermittent bleep sound to let your callers know that they are still on the line while they hold.

Announcements and Fail Over


Screenshot 5.jpg

Periodic Voice Announcements


Voice Announcement: This is an optional setting, you can choose which recording will be played to the callers of this queue.

Frequency of announcement: Select the periodic interval to play the recording to the callers.


Periodic Hold Position, Estimated Hold-time announcements and Thank you for your patience announcement.


Announce Position frequency: This setting let's you know how often to make any periodic announcement. Optional setting.

Announce Round Seconds: Here you can choose if you want to announce the number of seconds or round to the minute. If you want to announce seconds, select the amount to round to.

If Announce position is enabled, do you also want to report estimated hold-time?: Either yes, no or only once. Hold time will be announced as the estimated time, or less than 2 minutes when appropriate.

Thank you for your patience: This is an optional setting. Your callers will hear "Thank you for your patience", after announcing the Queue Position and Estimated Hold time left.

Fail Over Destinations


Here you can choose the destination for the follow failover options:

Click on the Save Queue when finished.

Static Members

Static Members are the predefined and permanently assigned members responsible for answering incoming calls to a queue. You can add as many members as you wish to any given queue.


Advantages

The advantage of the static members is that your members do not have to login or logout from the queue using the *11 and *12 commands. The only thing your members have to do is register or unregister their accounts from the VoIP.ms servers.


Disadvantages

One of the disadvantages of the static members is that your members are unable to log out of the queue, they are permanently assigned instead. Another disadvantage is that your members need to use their account or sub account to be in the queue, this could mean that they wouldn't be able to change devices and log into the queue without using their same credentials.

Add a Static Member


First you need to access the Calling Queue page that is under the DID Numbers menu in your Customer Portal.


ManageQueues.png


From there, you need only to click on the yellow Edit Static Members icon, that will bring you to the next screen:


StaticMembers.png


To add a new static member, you only need to fill out the following information:


Queue addstatmem.jpg


Description: Here you can assign a description to easily identify each member of the queue.

Account: Here you select the account or sub account that is going to be assigned as a member for this queue.

Priority: This value can be equal or greater than zero. Available members with lower priority will get the calls first. You can have more than one member with the same priority.

How to use your Queue

Once you have created a Queue, you can assign it to as many DID numbers as you want without needing to create it again. You need to go to your Customer Portal >> DID Numbers >> Manage DID(s). And from there you can route the DID numbers to go directly to the Queue, using an IVR, through a time condition or even as a failover option for your DID number.

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox