Caller ID - VoIP.ms Wiki

Caller ID

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
m (Update to correct some writing, phrasing, and language use.)
Line 1: Line 1:
-
Caller ID is a telephone service that transmits the calling party´s number to the called party´s telephone . When available the Caller ID number can be complemented with the caller ID name (description e.g. John Smith)
+
Caller ID is a telephone service that transmits the calling party´s number to the called party´s telephone . When available the Caller ID number can be complemented with Caller ID name (e.g. John Smith)
-
If you are placing outgoing calls, most likely you will need to pass a Caller ID to ensure proper termination of your calls, along with being able to reach toll free numbers properly.
+
If you are placing outgoing calls you will likely need to pass a Caller ID to ensure proper termination of your calls, particularly to properly reach toll free numbers.
-
There are two types of caller ID and its important to understand they are 2 different things: these are Caller ID Name and Caller ID Number.
+
There are two types of caller ID and it is important to understand that they are different things: Caller ID Number (CID), and Caller ID Name (CNAM).
-
Please note that the caller ID is only guaranteed while using premium route, and only for US48 and Canada calls. On the case of Canada, you may find your caller ID working on Value route for some routes.
+
Please note that the caller ID is only guaranteed while using premium routes, and only for US48 and Canadian calls. In Canada you may find caller ID working on some value routes.
 +
 
 +
Incoming Caller ID (from people calling you) is further described below.
-
We will check on incoming Caller ID (Caller ID from people calling you) later on this article.
 
__TOC__
__TOC__
Line 13: Line 14:
== Outgoing Caller ID number ==
== Outgoing Caller ID number ==
-
This is the most common Caller ID type you will be passing. If you will be using a more complex system capable of passing its own caller ID Like a [[Welcome#PBX|PBX]] you most likely would like to set this from the Caller ID field from the trunk, or from any of its extensions.
+
Caller ID number is the most common Caller ID type passed. If a more complex system capable of passing its own caller ID is being used, such as a [[Welcome#PBX|PBX]], the Caller ID field is likely set from the trunk, or one of its extensions.
 +
 
 +
If you are using devices like [[Welcome#Devices|Analogue Telephone Adapters]], [[Welcome#Devices|IP phones]], or [[Welcome#Softphones|softphones]], the caller ID number is available to be set from your voip.ms account via the customer portal.
-
If you are using devices like [[Welcome#Devices|Telephone Adapters]], [[Welcome#Devices|IP phones]] or [[Welcome#Softphones|softphones]], the caller ID number is just one more setting from your voip.ms account and you require to set this from the customer portal.
+
To set the Caller ID number for your Main account, access "[[Account Settings]]" from the "Main Menu" menu, General Tab.
-
To set the Caller ID number for your Main account, you need to enter the "[[Account Settings]]" from the "Main Menu" menu tab, and then head for the General Tab.
 
[[File:CIDmain.jpg|Main account Caller ID]]
[[File:CIDmain.jpg|Main account Caller ID]]
-
If you need to set the Caller ID number for your subaccount, you can set this at the moment of creating it, or later simply by going to the Edit page of the [[Sub Accounts|subaccount]]. It will work the same way.
+
The Caller ID number for a subaccount can be set at time of creation, or later by clicking Edit on the [[Sub Accounts|subaccount]].
-
'''It is strongly suggested to set a 10 digits valid Caller ID number, to ensure proper termination. The Caller ID field from the portal only supports numerical characters.'''
+
'''It is strongly suggested a 10 digits Caller ID number be set to ensure proper call termination. The portal's Caller ID field only supports numerical digits.'''
-
'''Anonymous and Toll free caller IDs are not recommended as they could cause troubles to connect, specially when Calling Toll free numbers.'''
+
'''Anonymous and Toll free caller IDs are not recommended, especially when Calling Toll free numbers, to reduce potential connection issues.'''

Revision as of 17:25, 29 November 2013

Caller ID is a telephone service that transmits the calling party´s number to the called party´s telephone . When available the Caller ID number can be complemented with Caller ID name (e.g. John Smith)

If you are placing outgoing calls you will likely need to pass a Caller ID to ensure proper termination of your calls, particularly to properly reach toll free numbers.

There are two types of caller ID and it is important to understand that they are different things: Caller ID Number (CID), and Caller ID Name (CNAM).

Please note that the caller ID is only guaranteed while using premium routes, and only for US48 and Canadian calls. In Canada you may find caller ID working on some value routes.

Incoming Caller ID (from people calling you) is further described below.


Contents


Outgoing Caller ID number

Caller ID number is the most common Caller ID type passed. If a more complex system capable of passing its own caller ID is being used, such as a PBX, the Caller ID field is likely set from the trunk, or one of its extensions.

If you are using devices like Analogue Telephone Adapters, IP phones, or softphones, the caller ID number is available to be set from your voip.ms account via the customer portal.

To set the Caller ID number for your Main account, access "Account Settings" from the "Main Menu" menu, General Tab.


Main account Caller ID


The Caller ID number for a subaccount can be set at time of creation, or later by clicking Edit on the subaccount.

It is strongly suggested a 10 digits Caller ID number be set to ensure proper call termination. The portal's Caller ID field only supports numerical digits. Anonymous and Toll free caller IDs are not recommended, especially when Calling Toll free numbers, to reduce potential connection issues.


Outgoing Caller ID name

The caller ID name is an additional information you can pass along with your Caller ID number. This will also be received on the callee's end and it could be your name or you Business.

For example: "John Smith"<9145551234>

The sample above is a Caller ID, that includes both Caller ID name and Caller ID number, commonly abbreviated as CID and CNAM among other variations.

Is not possible to set any Caller ID name from the voip.ms portal.

If you will be making calls to Canadian numbers, you can simply pass the Caller ID name from your device or system (if it supports it, most Softphones do). You will need to check for a field on the interface from the device to enter this setting, and in case you are using a more advanced system, get assistance to set the outgoing caller ID name set up.

The Caller ID name on US however works different, this is controlled by a national CNAM database, with records of numbers and names matching each number. When you make a call to a US number, you will send a caller ID number, and the system will check on the CNAM database for a name matching the same Caller ID number you passed, in order to display both name and number to final phone.

CNAM is only available for some USA numbers. In order to update your Caller ID on the CNAM database for your US calls, there is a process to follow which has a cost of $10 USD (one time only). Please contact voip.ms support to get further details on what information you need to submit and to confirm if your local US DID is available for CNAM update.

CNAM update is only available for some Local US DIDs. Toll frees can not have their Caller ID name updated.


Incoming Caller ID number and name

You will receive the Caller ID number and Caller ID name that the voip.ms server receives from the caller, this is exactly what will be sent to you on Incoming calls. You can always check what Caller ID number voip.ms receives, by going into your Call Detail Records to check the incoming calls.

The incoming caller ID name, works almost the same way, except that this is an optional setting that you need to enable from per DID number on the DID settings page. This option is called "Caller ID Lookup". When enabled, the system will perform a query on the LIBD/CNAM Database, for callers with Canadian or US CID number, in order to find a name matching that CID number. The system then will display the result of this query in the Caller ID name portion of the Caller ID, leading to a "Caller ID name"<5551231234> when people call your number.

IMPORTANT NOTE FOR CANADIAN DIDs

The majority of the Canadian DID numbers support CNAM Pass-Through. This means that for your incoming calls the system won't do a CNAM query (and not charge you either) if the incoming call is arriving already with a caller-id name, even if the DID receiving the call has the CNAM queries enabled in your VoIP.ms customer portal.



On a side note, outgoing Caller ID is not guaranteed on calls to Canadian cellular numbers, even when using the premium route. This is due to the way Canadian carriers work - they sometimes pass a random Caller ID that they have on record, changing the original. This is out of our control as it is the way Canadian carriers handle calls to cellular numbers.

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox