Buddy Talk - BT110 - VoIP.ms Wiki

Buddy Talk - BT110

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[quality revision][quality revision]
(Useful voice commande)
Line 60: Line 60:
-
= Useful voice commande =
+
= Useful Voice Command =
When the setup is done, you can easly use some voice commande, such as:
When the setup is done, you can easly use some voice commande, such as:
-
== Basic Question==
+
== Basic Question ==
:* "Alexa, what time is it?"
:* "Alexa, what time is it?"
Line 74: Line 74:
:* "Alexa, call [number]."
:* "Alexa, call [number]."
-
== Basic Call by contact Dialing ==
+
== Basic Call by Contact Dialing ==
:* "Alexa, Call [name]"
:* "Alexa, Call [name]"
-
== Call management ==
+
== Call Management ==
:* Answer the call: "Alexa, answer call"
:* Answer the call: "Alexa, answer call"
:* Hang Up a call: "Alexa, hang up"
:* Hang Up a call: "Alexa, hang up"

Revision as of 16:31, 31 August 2020

Buddy Talk BT110 Innomedia.jpg

Powered by the Amazon Alexa Voice Service (AVS), the BuddyTalk series of products supports a broad suite of AVS enabled smart speaker features. Equipped with advanced audio processing and VoIP technologies, BuddyTalk devices are intelligent speakerphones that deliver unprecedented flexibility in calling, superior voice quality, and high levels of security.


Contents

Prerequisite and Sub Account creation

In order to make the telephony function work on the buddytalk, you will need a sub-accoun. Note that you cannot use the same sub account credential for multiple devices.

First, create a new sub account, navigate to the upper navigation bar, below "Sub Accounts" click, on "Create Sub Account".

Basically, you only need to fill the Username and the Password.

If you set into your Buddytalk, the ability to make outgoing calls to a specific destination such as a mobile phone, landline phone, you must indicate a valid caller ID.

  • You can use one of your DID as well, however, you may use another valid outbound Caller ID number, but you will need to have a valid authorization from the owner of the number you wanted to use.
  • Note that using an anonymous outbound caller ID number isn't possible.

We suggest indicating a custom description in case you have many devices or sub accounts, this will help you to find directly the wanted sub account with the search bar into "Manage Sub Accounts".

  • You will need to open the "Advanced settings" in your sub-account and set to 300 seconds the field "Max Expiry".

If you want to have an internal extension to reach directly this device, you can indicate at an internal extension.


BuddyTalk setup

The initialization of the Buddy Talk BT110 device is separated in 3 stages. Wifi Setup, Amazon Alexa Setup then the SIP Telephony Setup.

In order to configure your VoIP.ms sub-account with your Buddy Talk BT110, you must have completed the first two stages.

After completing the first 2 stages, you will be able to set up your VoIP.ms sub-account to your devices.


Buddy Talk BT110 Add VoIPms SubAccount.jpg
Name: You need to enter your outbound Caller ID Name (In CAPITAL LETTERS, without special characters and not longer than 15 characters. Spaces are allowed)
Account ID: Enter your Sub-account username.
Auth ID: Reenter your Sub-Account username.
Password: This will be the password associated with your sub-account.
Domain: Your preferred VoIP.ms PoP server. (eg. montreal3.voip.ms)
Outbound proxy: (optional), toggle switch (optional)
Proxy: (optional), Your preferred VoIP.ms PoP server. (eg. montreal3.voip.ms)
Local SIP Port: You can use the default port 5060, or one of our alternative ports such as 5080, 42872.
For the call encryption over SIP-TLS, please see the note below
Preferred transport: You can use the default UDP protocol.
For the call encryption over SIP-TLS, please see the note below


NOTE: To use the call encryption over SIP-TLS, you must enable the Encrypted SIP Traffic in your sub-account Advanced Options and use the following settings.
  • Local SIP Port: Use the default port 5061 or one of our alternative ports such as 5081 or 42873.
  • Preferred transport: You need to select the TLS transport protocol.


When the SIP registration is successful that the Phone icon in the upper left corner will switch to green, indicating successful registration also you will see the phone LED on the top of the device, changing from RED to GREEN then OFF.


Useful Voice Command

When the setup is done, you can easly use some voice commande, such as:


Basic Question

  • "Alexa, what time is it?"
  • "Alexa, set a reminder."

Basic Call: Digit Dialing

  • "Alexa, call [number]."

Basic Call by Contact Dialing

  • "Alexa, Call [name]"

Call Management

  • Answer the call: "Alexa, answer call"
  • Hang Up a call: "Alexa, hang up"
Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox