Auerswald COMpact 5010

From VoIP.ms Wiki

Latest revision as of 00:55, 5 September 2019

After you have logged in to your device configuration screen, please enter the following information.

Configuration Details

Step 1

Under Voice Over IP (VoIP) >> Providers, enter the following:

Domain: london.voip.ms (Replace with the address of one of the multiple servers from VoIP.ms)

Registrar: london.voip.ms (Replace with the address of one of the multiple servers from VoIP.ms)

Port: 5060

Note:

• The (internal) SIP port set by the box, each configuration for a provider has it's own port
• The shown codec setting works only if G.711 and G.729 are selected in the portal, otherwise you have to select only these two codecs in the PBX configuration
• Format der eigenen Rufnummer (own number): With this setting, the PBX will send the correct caller ID.

Step 2

Under the next tab Voice Over IP (VoIP) >> Accounts, enter the following:

Select the provider that you have entered on Step 1 (Voipms), then under Kind of Connection select PTMP Connection, finally click the button Configure.

Now on the following screen, set the following.

Account Name: The name that was chosen in Setup Account 1

Country Prefix: E.g. 001 for NAMP or 01141 for Switzerland

Area code: 201 for New York

Country: Technically the country that correspondence with the country prefix, however there is a back in this version of the firmware and only "Germany" can be chosen. It does not have any effect on the functionality

Exchange line access number (account number): The internal number in the PBX for this account. Can be used to dial-out directly and override the set up for external line preference

User name: 100000 (your VoIP.ms username)

Password: ********* (account password)

Authorization ID: Can be left blank

Multiple subscriber numbers (MSNs): The phone number(s) chosen/assigned by VoIP.ms

Display name: Assign a unique display name (16 characters max.) for the MSN

Ringer rhythm: Optionally, you can select the ringer rhythm that should be used for the MS

Guide Links

In the event where you need the guides directly from Auerswald, you may find the user and admin manual guides below:

User Manual : Download PDF

Admin Manual : Download PDF