Asterisk SIP - VoIP.ms Wiki

Asterisk SIP

From VoIP.ms Wiki

Revision as of 15:41, 19 November 2019 by Edward (Talk | contribs)
Jump to: navigation, search

Contents

Asterisk (SIP)

sip.conf

[general]                
register => 100000:johnspassword@atlanta.voip.ms:5060

[voipms]
canreinvite=no
context=mycontext
host=atlanta.voip.ms ;(one of our multiple servers, you can choose the one closer to your location)
secret=johnspassword ;your password
type=peer
username=100000 ;(Replace with your 6 digit Main SIP Account User ID or Sub Account username, i.e. 123456 or 123456_sub)
disallow=all
allow=ulaw
; allow=g729 ; Uncomment if you support G729
fromuser=100000 ;(Replace with your 6 digit Main SIP Account User ID or Sub Account username, i.e. 123456 or 123456_sub)
trustrpid=yes
sendrpid=yes
insecure=invite
nat=yes

extensions.conf

[mycontext]
; Make sure to include inbound prior to outbound because the _NXXNXXXXXX handler will match the incoming call and create a loop
include => voipms-inbound
include => voipms-outbound

[voipms-outbound]
exten => _1NXXNXXXXXX,1,Dial(SIP/${EXTEN}@voipms)
exten => _1NXXNXXXXXX,n,Hangup()
exten => _NXXNXXXXXX,1,Dial(SIP/1${EXTEN}@voipms)
exten => _NXXNXXXXXX,n,Hangup()
exten => _011.,1,Dial(SIP/${EXTEN}@voipms)
exten => _011.,n,Hangup()
exten => _00.,1,Dial(SIP/${EXTEN}@voipms)
exten => _00.,n,Hangup()

; inbound context example for your DID numbers, do not add the number 1 in front

[voipms-inbound]
exten => 7863643011,1,Answer() ;your DID


Asterisk TLS/SRTP (SIP)

1. Make sure your Main account or sub-account has "Encrypted SIP Traffic" enabled. Bear in mind, if this setting is enabled and you use UDP/TCP you will be rejected with error code 488. Enable this for the Main Account at Main Menu>> Account settings>> Advanced tab and for a sub-account at Sub accounts>> Manage sub-accounts and by clicking on the orange icon with a pen and click at "Advanced Options Click here to display"

Click to enlarge
Click to enlarge

2. Now that your account/sub-account has this setting enabled, your device only needs to send TLS and SRTP.


For the registration over TLS, you need to define the protocol the PBX will use in the general config.


[general]                
register => tls://100000:johnspassword@atlanta.voip.ms:5061


For the outbound part, add the following lines to the peer details.

encryption=yes
transport=tls

See example below:

[voipms]
encryption=yes
transport=tls
canreinvite=no
context=mycontext
host=atlanta.voip.ms ;(one of our multiple servers, you can choose the one closer to your location)
secret=johnspassword ;your password
type=peer
username=100000 ;(Replace with your 6 digit Main SIP Account User ID or Sub Account username, i.e. 123456 or 123456_sub)
disallow=all
allow=ulaw
; allow=g729 ; Uncomment if you support G729
fromuser=100000 ;(Replace with your 6 digit Main SIP Account User ID or Sub Account username, i.e. 123456 or 123456_sub)
trustrpid=yes
sendrpid=yes
insecure=invite
nat=yes


Asterisk IP Auth. (SIP)

sip.conf

Note: You'll need to create a sub account to use IP Auth

[voipms]
canreinvite=nonat
context=mycontext
host=atlanta.voip.ms ;(one of our multiple servers, you can choose the one closer to your location)
type=peer
disallow=all
allow=ulaw
; allow=g729 ; uncomment if you support g729
nat=yes


extensions.conf

[mycontext]
; Make sure to include inbound prior to outbound because the _NXXNXXXXXX handler will match the incoming call and create a loop
include => voipms-inbound
include => voipms-outbound

[voipms-outbound]
exten => _1NXXNXXXXXX,1,Dial(SIP/${EXTEN}@voipms)
exten => _1NXXNXXXXXX,n,Hangup()
exten => _NXXNXXXXXX,1,Dial(SIP/1${EXTEN}@voipms)
exten => _NXXNXXXXXX,n,Hangup()
exten => _011.,1,Dial(SIP/${EXTEN}@voipms)
exten => _011.,n,Hangup()
exten => _00.,1,Dial(SIP/${EXTEN}@voipms)
exten => _00.,n,Hangup()

; inbound context example for your DID numbers, do not add the number 1 in front

[voipms-inbound]
exten => 7863643011,1,Answer() ;your DID

Known Issues

Getting Message Waiting Indicator to Work with VoIP.ms Voicemail

VoIP.ms sends MWI notifications unsolicited. Please make the following changes in your configurations.

Remove this Line please.

[general] Section

mwi => 123456:mypassword@losangeles.voip.ms/65000

Add this Line please.

[voipms] Section

unsolicited_mailbox=65000


Local extension calling

(User submitted) In order for this to work, you must fill out "User Context and User Details"


User Context Name: 100000 (your account)

[100000] your account
type=user
auth=md5
notransfer=yes
disallow=all
allow=gsm&ulaw
trunk=yes
secret=****
context=from-trunk







Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
VoIP.ms Blog
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox