3CX Phone System
From VoIP.ms Wiki
3CX Phone System for Windows Version 9.
3CX Phone System is a software-based IP PBX that replaces a traditional PBX and delivers employees the ability to make, receive and transfer calls. The IP PBX supports all traditional PBX features. An IP PBX is also referred to as a VOIP Phone System, IP PABX or SIP server.
Calls are sent as data packets over the computer data network instead of via the traditional phone network. Phones share the network with computers and separate phone wiring can therefore be eliminated. With the use of a VOIP gateway, you can connect existing phone lines to the IP PBX and make and receive phone calls via a regular PSTN line. The 3CX phone system uses standard SIP software or hardware phones, and provides internal call switching, as well as outbound or inbound calling via the standard phone network or via a VOIP service.
In the 3CX Phone System Portal, in the middle of the top, we can see the Add Voip Provider Wizard , we do click on there. Once we are there we can put the Name of the Provider, in this case we gonna put Voip.ms and in the Provider list we can select Generic Voip Provider.
Once we already click on continue, we will see the Voip Provider Details configure it according to the following instructions:
- SIP server hostname or IP: server.voip.ms (e.g: newyork.voip.ms) select one of our servers.
- SIP Server port: 5060
- Outbound proxy hostname or IP: Leave in blank
- Outbound proxy port (default is 5060): 5060
Atlanta, GA: atlanta.voip.ms (220.127.116.11) Chicago, IL: chicago.voip.ms (18.104.22.168) Dallas, TX: dallas.voip.ms (22.214.171.124) Houston, TX: houston.voip.ms (126.96.36.199) Los Angeles, CA: losangeles.voip.ms (188.8.131.52) New York, NY: newyork.voip.ms (184.108.40.206) Seattle, WA: seattle.voip.ms (220.127.116.11) Tampa, FL: tampa.voip.ms (18.104.22.168) Montreal 2,QC: montreal2.voip.ms (22.214.171.124) Toronto 2, ON: toronto2.voip.ms (126.96.36.199) Montreal,QC: montreal.voip.ms (188.8.131.52) Toronto, ON: toronto.voip.ms (184.108.40.206) London, UK: london.voip.ms (220.127.116.11)
Account details section, to complete this section please do it according to the following instructions:
- External Number: Your voip.ms acount (SIP user name)
- Authentication ID: Your voip.ms account (SIP user name)
- Authentication Password: Your voip.ms password. (the password you set when you signup)
- Maximum simultaneous calls: Specify how many concurrent calls your account supports.
Now specify how calls from this VOIP provider should be routed. You can specify a different route outside office hours.
End call Connect to Extension Connect to Queue Connect to Digital Receptionist Voicemail Box for extension Forward to Outside Number
On the next page, you will be asked for a prefix so as to create an outbound rule for Voip.ms . Enter the dialling prefix in the “Calls to numbers starting with (prefix)” text box. To make calls via this provider, precede the number to be dialed with this prefix.
An outbound rule defines on which provider an outbound call should be placed,based on who is making the call, the number that is being dialled and the length of the number.
Specify for which calls to apply the outbound route. In the „Apply this rule to these calls‟ section, specify any of these options:
- Calls to Numbers starting with: apply this rule to all calls starting with the number you specify. For example, specify 1 to specify that all calls starting with a 1 (usually a prefix) are outbound calls. Callers would dial „123456789‟ to reach the number „23456789‟
- Calls from extensions: Select this option to define particular extensions or extension ranges for which this rule applies. Specify one or more extensions separated by commas, or specify a range using a -, for example 105-140.
- Calls with a Number length of: Select this option to apply the rule to numbers with a particular digit length, for example 10 digits. This way you can capture calls to local area numbers or national numbers.
- Now specify how the outbound calls should be made. In the Make outbound calls on section, select up to 3 routes for the call. Each defined gateway or provider will be listed as a possible route. If the first route is not available or busy, 3CX Phone System will automatically try the second rout.
With the Inbound rules we can configure calls made to that particular DID number to go to a particular extension, digital receptionist or other destination.
To add an extension, click on „Add Extension‟ from the toolbar.
- Enter the extension number: first and last name and the Email address (Optional) of the user. The email address will be used for voice mail notifications and as the default SIP ID. You can leave the field empty if you wish.
- Now specify an authentication ID and password:
ID – The SIP „Username‟. e.g. 200. Password –The SIP Password (password can be hidden from the user).
- Voicemail: You can enable different features from your Voicemail
Enable voice mail Play Caller ID – the voicemail system will play the number of the caller who left the voice message Read out date/time of message – the voicemail system will play back the time of the voice message to be played PIN number – this pin number is used to protect the voice mailbox and is used by the user to access the mailbox. The PIN number is also used as a password to logon to 3CX Assistant or the MyPhone User portal.
- Click OK to create the extension.
After you have created the extension, a summary page will appear, which shows the information that the SIP phone will need:
- Proxy server IP or FQDN: Host name of 3CX Phone System
- User ID: Extension number created
- Authentication ID: As specified in Authentication ID field
- Password: As specified in Authentication password field