3CX Phone System - VoIP.ms Wiki

3CX Phone System

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[draft revision][draft revision]
(Adding Trunk)
(Outbound Routes)
Line 64: Line 64:
On the next page, you will be asked for a prefix so as to create an outbound rule for Voip.ms . Enter the dialling prefix in the “Calls to numbers starting with (prefix)” text box. To make calls via this provider, precede the number to be dialed with this prefix.
On the next page, you will be asked for a prefix so as to create an outbound rule for Voip.ms . Enter the dialling prefix in the “Calls to numbers starting with (prefix)” text box. To make calls via this provider, precede the number to be dialed with this prefix.
-
==Outbound Routes==
+
==Outbound Rules==
 +
 
 +
An outbound rule defines on which provider an outbound call should be placed,based on who is making the call, the number that is being dialled and the length of the number.
 +
 
 +
[[File:3CXOutboundRules.jpg|400px]]
 +
 
 +
 
 +
Specify for which calls to apply the outbound route. In the „Apply this rule to these calls‟ section, specify any of these options:
 +
 
 +
*'''Calls to Numbers starting with''': apply this rule to all calls starting with the number you specify. For example, specify 1 to specify that all calls  starting with a 1 (usually a prefix) are outbound calls. Callers would dial „123456789‟ to reach the number „23456789‟
 +
 
 +
*'''Calls from extensions''': Select this option to define particular extensions or extension ranges for which this rule applies. Specify one or more extensions separated by commas, or specify a range using a -, for example 105-140.
 +
 
 +
 
 +
*'''Calls with a Number length of''': Select this option to apply the rule to numbers with a particular digit length, for example 10 digits. This way you can capture calls to local area numbers or national numbers.
 +
 
 +
*Now specify how the outbound calls should be made. In the '''Make outbound calls on''' section, select up to 3 routes for the call. Each defined gateway or provider will be listed as a possible route. If the first route is not available or busy, 3CX Phone System will automatically try the second rout.
 +
 
 +
==Creating Extensions==

Revision as of 20:48, 14 July 2011

3CX Phone System for Windows Version 9.

3CX Phone System is a software-based IP PBX that replaces a traditional PBX and delivers employees the ability to make, receive and transfer calls. The IP PBX supports all traditional PBX features. An IP PBX is also referred to as a VOIP Phone System, IP PABX or SIP server.

Calls are sent as data packets over the computer data network instead of via the traditional phone network. Phones share the network with computers and separate phone wiring can therefore be eliminated. With the use of a VOIP gateway, you can connect existing phone lines to the IP PBX and make and receive phone calls via a regular PSTN line. The 3CX phone system uses standard SIP software or hardware phones, and provides internal call switching, as well as outbound or inbound calling via the standard phone network or via a VOIP service.

Contents

Adding Trunk

In the 3CX Phone System Portal, in the middle of the top, we can see the Add Voip Provider Wizard , we do click on there. Once we are there we can put the Name of the Provider, in this case we gonna put Voip.ms and in the Provider list we can select Generic Voip Provider.

3CX trunk 1.jpg


Once we already click on continue, we will see the Voip Provider Details configure it according to the following instructions:

3CX trunk 2.jpg

Servers:

    Atlanta, GA: atlanta.voip.ms        (174.34.146.162)
    Chicago, IL: chicago.voip.ms        (64.120.22.242)
    Dallas, TX: dallas.voip.ms          (74.54.54.178)
    Houston, TX: houston.voip.ms        (209.62.1.2)
    Los Angeles, CA: losangeles.voip.ms (67.215.241.250)
    New York, NY: newyork.voip.ms       (74.63.41.218)
    Seattle, WA: seattle.voip.ms        (69.147.236.82)
    Tampa, FL: tampa.voip.ms            (68.233.226.97)
    Montreal 2,QC: montreal2.voip.ms    (174.142.75.171)
    Toronto 2, ON: toronto2.voip.ms     (174.137.63.206)
    Montreal,QC: montreal.voip.ms       (67.205.74.164)
    Toronto, ON: toronto.voip.ms        (174.137.63.206)
    London, UK: london.voip.ms          (78.129.153.20)


Account details section, to complete this section please do it according to the following instructions:

3CX trunk 3.jpg

Calls Routing

3CX trunk 4.jpg

Now specify how calls from this VOIP provider should be routed. You can specify a different route outside office hours.

   End call
   Connect to Extension
   Connect to Queue
   Connect to Digital Receptionist
   Voicemail Box for extension
   Forward to Outside Number


On the next page, you will be asked for a prefix so as to create an outbound rule for Voip.ms . Enter the dialling prefix in the “Calls to numbers starting with (prefix)” text box. To make calls via this provider, precede the number to be dialed with this prefix.

Outbound Rules

An outbound rule defines on which provider an outbound call should be placed,based on who is making the call, the number that is being dialled and the length of the number.

3CXOutboundRules.jpg


Specify for which calls to apply the outbound route. In the „Apply this rule to these calls‟ section, specify any of these options:


Creating Extensions

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox