VoIP.ms Wiki - User contributions [en]

VoIP.ms Softphone

2025-12-09T01:28:19Z

Roy:

<div><ul>
<li style="display: inline-block;">
[[File:Logo-VoIPms-light.png|none|600px|link=http://www.voip.ms]]
</li>

Simplify the way you communicate, whether you’re in the office or on the go. VoIP.ms Softphone provides you the flexibility you need.
Available on both the App Store(2) and Google Play.

(1) '''The VoIP.ms Softphone is in BETA and will be available free of charge starting on May 2025, until further notice. '''

__TOC__

You will find below all the steps to succesfully start using VoIP.ms Softphone.

= Step 1 - Downloading VoIP.ms Softphone =

: Download the softphone at the following URL:
:* Android - [https://play.google.com/store/apps/details?id=ms.voip.softphone.android&pli=1 here]
:* Apple - [https://apps.apple.com/app/voip-ms-softphone/id6748383110 here]

=Step 2 - Initial Configuration of VoIP.ms Softphone=

: After downloading the softphone to your mobile device, open the app to begin. Once the initial verification and setup are complete, you’ll be prompted to enter your username, password, and domain on the login screen.

::[[File:VoIPmsSoftphone12025.png|border|150px]]

:* Username: This can be found by logging into your VoIP.ms customer portal and look for the SIP/IAX SIP username (6-digit number or the 6 digit followed by '''_sub-account-name''').
:* Password: If you haven’t changed it, this is the same password you use to access your VoIP.ms portal.
:* Domain: Choose the server closest to your location. For a full list of available servers, please refer to [https://wiki.voip.ms/article/Servers this article].

<br>

<div style="margin-left:10px;
padding:5px;
border-left: 6px solid rgb(208, 56, 45, 0.8);
box-shadow: 8px 6px 9px -2px #f2f2f2;
background-color: rgba(208, 56, 45, 0.08);
width:70vw;">
🚨 '''IMPORTANT'''
: <b style="color:#b30000;">Are you located outside of the Americas?</b> If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]
: US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.
</div>

<br>
: Once you’ve entered the required information, tap the check mark icon in the top-right corner of your screen to proceed.

<br>
::[[File:VoIPmsSoftphone22025.png|border|150px]]

=Step 3 - Permission Allowance=

: Next, you will be prompted to allow several permissions to ensure the VoIP.ms softphone works as intended:

:: 1) [[File:VoIPmsSoftphonetos2025.png|border|150px]] 2) [[File:VoIPmsSoftphone3.png|border|150px]] 3) [[File:VoIPmsSoftphone4.png|border|150px]] 4) [[File:VoIPmsSoftphone5.png|border|150px]] 5) [[File:VoIPmsSoftphone6.png|border|150px]] 6) [[File:VoIPmsSoftphone7.png|border|150px]]

::* ''' End User License Agreement (EULA)''': All the information related to VoIP.ms EULA
::* '''Notifications Permission''': Allows the app to notify you of missed calls, voicemail messages, and other important alerts.
::* '''Microphone Permission''': Enables the app to transmit your voice clearly during calls.
::* '''Phone Permission''': Enhances interoperability between the app and your mobile device’s native calling features.
::* '''Contacts Permission''': Integrates your phone’s contact list, making it easier to place calls directly through the app.
::* '''Full-Screen on Incoming Calls''': Ensures that incoming calls are displayed in full-screen mode rather than as a small popup.

=Step 4 - Ready to Make Phone Calls!=
: Once you’ve granted all the necessary permissions, you’re ready to start making calls!
: To test your setup, you can dial 4443, which will initiate a call quality test. After the message plays, you’ll have the opportunity to speak and hear your voice played back.

::[[File:VoIPmsSoftphone8.png|border|150px]]

=Step 5 - Setting Other Features=

==Multi-Account Registration==
As of 2025-09-04, you can now register multiple accounts on your VoIP.ms softphone!

You can quickly create new registration under Settings (3 dots on top right of your softphone), Accounts and pressing the '''+'''.

As for quickly changing from 1 account to another to make outgoing calls, you can do so on the dialer page by pressing the account status on top left, and then changing to the sub account you want to use for dialing out. Incoming calls will work by default and will be pushed to your phone, even if the sub account is not selected.

[[File:Voipmssoftphonereg2.png|200px]]

==Setting a Voicemail==
In the softphone, press the menu button on the top right (3 dots), Settings, Account Setup, Advanced Settings and set the option '''VoiceMail Number''' to *97. Once this is done, you will need to configure your voicemail in your VoIP.ms portal. [https://wiki.voip.ms/article/Voicemail See Following Article] to proceed on the configuration at the portal level.

==Setting SMS Messages==

[https://wiki.voip.ms/article/SMS-MMS#Send_and_Receive_Messages_.28via_SIP_MESSAGE_Protocol.29 See Following Article] to set SMS messages.

==VoIP.ms Softphone Call Recording Feature==

To record calls directly from your VoIP.ms softphone, simply place a call and then press on the record button.

[[File:VoIPmsSoftphoneCallRecord.png|200px]]

== VoIP.ms Softphone Call Forwarding Feature==

To forward calls automatically on incoming calls, press the 3 dots button on the top right of your screen, settings, Preferences, Call Forwarding and:
*- Enable the option
*- In '''Forward To''', set the number you want to forward calls to.

You can enable instead the option '''Forward Button'', allowing you to forward calls to an arbitrary number when accepting a call.

== Setting SIP TLS (Encrypted Calls) ==

'''Note:''' You must have already downloaded and configured your softphone. If not done already, please go back to the initial steps on configuring your softphone.

You will first need to enable the encryption setting at your VoIP.ms account level. Please refer [https://wiki.voip.ms/article/Call_Encryption_-_TLS/SRTP to this article] on knowing how to configure SIP TLS on your VoIP.ms main account or sub account.

Once you've enabled encryption on your account:
*open VoIP.ms softphone and click on the 3 dots on the top right of the application, Settings, Account Setup and then Advanced Settings.
*Look for '''Transport Protocol''' option and change it to TLS (SIP).
*Next, look for the option '''Secure Calls''', make sure that the option '''Incoming Calls''' is enabled and that the option '''Outgoing Calls''' is set to '''Required''', and then press on the check button on the top right of your screen.

:: 1) [[File:VoIPmsSoftTLS20250916.png|border|150px]] 2) [[File:VoIPmsSoftTLS2.png|border|150px]]

=FAQ=

'''Multiple Registration'''
*Q - Can I have multiple sub accounts registered on VoIP.ms softphone?
*A - As of 2025-09-04, you can now register multiple sub accounts.

'''Push Notification'''
*Q - Does the softphone offer PUSH notification?
*A - Yes.

'''Registration Persisting Despite the VoIP.ms Application Being Removed'''
*Q - My main account / sub account still shows registered despite removing the VoIP.ms softphone
*A - Your credentials are in the PUSH server. To resolve this:
**Head into your VoIP.ms portal.
**For the main account, head to Main Menu, Account Settings, Security tab and then change your SIP/IAX password.
**For a sub account, head to Sub Account, Manage Sub Account, edit the sub account and then change your SIP/IAX password.

VoIP.ms Softphone

2025-12-09T01:27:26Z

Roy:

<div><ul>
<li style="display: inline-block;">
[[File:Logo-VoIPms-light.png|none|600px|link=http://www.voip.ms]]
</li>

Simplify the way you communicate, whether you’re in the office or on the go. VoIP.ms Softphone provides you the flexibility you need.
Available on both the App Store(2) and Google Play.

(1) '''The VoIP.ms Softphone is in BETA and will be available free of charge starting on May 2025, until further notice. '''

__TOC__

You will find below all the steps to succesfully start using VoIP.ms Softphone.

= Step 1 - Downloading VoIP.ms Softphone =

: Download the softphone at the following URL:
:* Android - [https://play.google.com/store/apps/details?id=ms.voip.softphone.android&pli=1 here]
:* Apple - [https://apps.apple.com/app/voip-ms-softphone/id6748383110 here]

=Step 2 - Initial Configuration of VoIP.ms Softphone=

: After downloading the softphone to your mobile device, open the app to begin. Once the initial verification and setup are complete, you’ll be prompted to enter your username, password, and domain on the login screen.

::[[File:VoIPmsSoftphone12025.png|border|150px]]

:* Username: This can be found by logging into your VoIP.ms customer portal and look for the SIP/IAX SIP username (6-digit number or the 6 digit followed by '''_sub-account-name''').
:* Password: If you haven’t changed it, this is the same password you use to access your VoIP.ms portal.
:* Domain: Choose the server closest to your location. For a full list of available servers, please refer to [https://wiki.voip.ms/article/Servers this article].

<div style="margin-left:10px;
padding:5px;
border-left: 6px solid rgb(208, 56, 45, 0.8);
box-shadow: 8px 6px 9px -2px #f2f2f2;
background-color: rgba(208, 56, 45, 0.08);
width:70vw;">
🚨 '''IMPORTANT'''
: <b style="color:#b30000;">Are you located outside of the Americas?</b> If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]
: US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.
</div>
<br>
: Once you’ve entered the required information, tap the check mark icon in the top-right corner of your screen to proceed.
<br>
::[[File:VoIPmsSoftphone22025.png|border|150px]]

=Step 3 - Permission Allowance=

: Next, you will be prompted to allow several permissions to ensure the VoIP.ms softphone works as intended:

:: 1) [[File:VoIPmsSoftphonetos2025.png|border|150px]] 2) [[File:VoIPmsSoftphone3.png|border|150px]] 3) [[File:VoIPmsSoftphone4.png|border|150px]] 4) [[File:VoIPmsSoftphone5.png|border|150px]] 5) [[File:VoIPmsSoftphone6.png|border|150px]] 6) [[File:VoIPmsSoftphone7.png|border|150px]]

::* ''' End User License Agreement (EULA)''': All the information related to VoIP.ms EULA
::* '''Notifications Permission''': Allows the app to notify you of missed calls, voicemail messages, and other important alerts.
::* '''Microphone Permission''': Enables the app to transmit your voice clearly during calls.
::* '''Phone Permission''': Enhances interoperability between the app and your mobile device’s native calling features.
::* '''Contacts Permission''': Integrates your phone’s contact list, making it easier to place calls directly through the app.
::* '''Full-Screen on Incoming Calls''': Ensures that incoming calls are displayed in full-screen mode rather than as a small popup.

=Step 4 - Ready to Make Phone Calls!=
: Once you’ve granted all the necessary permissions, you’re ready to start making calls!
: To test your setup, you can dial 4443, which will initiate a call quality test. After the message plays, you’ll have the opportunity to speak and hear your voice played back.

::[[File:VoIPmsSoftphone8.png|border|150px]]

=Step 5 - Setting Other Features=

==Multi-Account Registration==
As of 2025-09-04, you can now register multiple accounts on your VoIP.ms softphone!

You can quickly create new registration under Settings (3 dots on top right of your softphone), Accounts and pressing the '''+'''.

As for quickly changing from 1 account to another to make outgoing calls, you can do so on the dialer page by pressing the account status on top left, and then changing to the sub account you want to use for dialing out. Incoming calls will work by default and will be pushed to your phone, even if the sub account is not selected.

[[File:Voipmssoftphonereg2.png|200px]]

==Setting a Voicemail==
In the softphone, press the menu button on the top right (3 dots), Settings, Account Setup, Advanced Settings and set the option '''VoiceMail Number''' to *97. Once this is done, you will need to configure your voicemail in your VoIP.ms portal. [https://wiki.voip.ms/article/Voicemail See Following Article] to proceed on the configuration at the portal level.

==Setting SMS Messages==

[https://wiki.voip.ms/article/SMS-MMS#Send_and_Receive_Messages_.28via_SIP_MESSAGE_Protocol.29 See Following Article] to set SMS messages.

==VoIP.ms Softphone Call Recording Feature==

To record calls directly from your VoIP.ms softphone, simply place a call and then press on the record button.

[[File:VoIPmsSoftphoneCallRecord.png|200px]]

== VoIP.ms Softphone Call Forwarding Feature==

To forward calls automatically on incoming calls, press the 3 dots button on the top right of your screen, settings, Preferences, Call Forwarding and:
*- Enable the option
*- In '''Forward To''', set the number you want to forward calls to.

You can enable instead the option '''Forward Button'', allowing you to forward calls to an arbitrary number when accepting a call.

== Setting SIP TLS (Encrypted Calls) ==

'''Note:''' You must have already downloaded and configured your softphone. If not done already, please go back to the initial steps on configuring your softphone.

You will first need to enable the encryption setting at your VoIP.ms account level. Please refer [https://wiki.voip.ms/article/Call_Encryption_-_TLS/SRTP to this article] on knowing how to configure SIP TLS on your VoIP.ms main account or sub account.

Once you've enabled encryption on your account:
*open VoIP.ms softphone and click on the 3 dots on the top right of the application, Settings, Account Setup and then Advanced Settings.
*Look for '''Transport Protocol''' option and change it to TLS (SIP).
*Next, look for the option '''Secure Calls''', make sure that the option '''Incoming Calls''' is enabled and that the option '''Outgoing Calls''' is set to '''Required''', and then press on the check button on the top right of your screen.

:: 1) [[File:VoIPmsSoftTLS20250916.png|border|150px]] 2) [[File:VoIPmsSoftTLS2.png|border|150px]]

=FAQ=

'''Multiple Registration'''
*Q - Can I have multiple sub accounts registered on VoIP.ms softphone?
*A - As of 2025-09-04, you can now register multiple sub accounts.

'''Push Notification'''
*Q - Does the softphone offer PUSH notification?
*A - Yes.

'''Registration Persisting Despite the VoIP.ms Application Being Removed'''
*Q - My main account / sub account still shows registered despite removing the VoIP.ms softphone
*A - Your credentials are in the PUSH server. To resolve this:
**Head into your VoIP.ms portal.
**For the main account, head to Main Menu, Account Settings, Security tab and then change your SIP/IAX password.
**For a sub account, head to Sub Account, Manage Sub Account, edit the sub account and then change your SIP/IAX password.

VoIP.ms Softphone

2025-12-09T01:26:44Z

Roy:

<div><ul>
<li style="display: inline-block;">
[[File:Logo-VoIPms-light.png|none|600px|link=http://www.voip.ms]]
</li>

Simplify the way you communicate, whether you’re in the office or on the go. VoIP.ms Softphone provides you the flexibility you need.
Available on both the App Store(2) and Google Play.

(1) '''The VoIP.ms Softphone is in BETA and will be available free of charge starting on May 2025, until further notice. '''

__TOC__

You will find below all the steps to succesfully start using VoIP.ms Softphone.

= Step 1 - Downloading VoIP.ms Softphone =

: Download the softphone at the following URL:
:* Android - [https://play.google.com/store/apps/details?id=ms.voip.softphone.android&pli=1 here]
:* Apple - [https://apps.apple.com/app/voip-ms-softphone/id6748383110 here]

=Step 2 - Initial Configuration of VoIP.ms Softphone=

: After downloading the softphone to your mobile device, open the app to begin. Once the initial verification and setup are complete, you’ll be prompted to enter your username, password, and domain on the login screen.

::[[File:VoIPmsSoftphone12025.png|border|150px]]

:* Username: This can be found by logging into your VoIP.ms customer portal and look for the SIP/IAX SIP username (6-digit number or the 6 digit followed by '''_sub-account-name''').
:* Password: If you haven’t changed it, this is the same password you use to access your VoIP.ms portal.
:* Domain: Choose the server closest to your location. For a full list of available servers, please refer to [https://wiki.voip.ms/article/Servers this article].

<div style="margin-left:10px;
padding:5px;
border-left: 6px solid rgb(208, 56, 45, 0.8);
box-shadow: 8px 6px 9px -2px #f2f2f2;
background-color: rgba(208, 56, 45, 0.08);
width:70vw;">
🚨 '''IMPORTANT'''
: <b style="color:#b30000;">Are you located outside of the Americas?</b> If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]
: US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.
</div>

: Once you’ve entered the required information, tap the check mark icon in the top-right corner of your screen to proceed.

::[[File:VoIPmsSoftphone22025.png|border|150px]]

=Step 3 - Permission Allowance=

: Next, you will be prompted to allow several permissions to ensure the VoIP.ms softphone works as intended:

:: 1) [[File:VoIPmsSoftphonetos2025.png|border|150px]] 2) [[File:VoIPmsSoftphone3.png|border|150px]] 3) [[File:VoIPmsSoftphone4.png|border|150px]] 4) [[File:VoIPmsSoftphone5.png|border|150px]] 5) [[File:VoIPmsSoftphone6.png|border|150px]] 6) [[File:VoIPmsSoftphone7.png|border|150px]]

::* ''' End User License Agreement (EULA)''': All the information related to VoIP.ms EULA
::* '''Notifications Permission''': Allows the app to notify you of missed calls, voicemail messages, and other important alerts.
::* '''Microphone Permission''': Enables the app to transmit your voice clearly during calls.
::* '''Phone Permission''': Enhances interoperability between the app and your mobile device’s native calling features.
::* '''Contacts Permission''': Integrates your phone’s contact list, making it easier to place calls directly through the app.
::* '''Full-Screen on Incoming Calls''': Ensures that incoming calls are displayed in full-screen mode rather than as a small popup.

=Step 4 - Ready to Make Phone Calls!=
: Once you’ve granted all the necessary permissions, you’re ready to start making calls!
: To test your setup, you can dial 4443, which will initiate a call quality test. After the message plays, you’ll have the opportunity to speak and hear your voice played back.

::[[File:VoIPmsSoftphone8.png|border|150px]]

=Step 5 - Setting Other Features=

==Multi-Account Registration==
As of 2025-09-04, you can now register multiple accounts on your VoIP.ms softphone!

You can quickly create new registration under Settings (3 dots on top right of your softphone), Accounts and pressing the '''+'''.

As for quickly changing from 1 account to another to make outgoing calls, you can do so on the dialer page by pressing the account status on top left, and then changing to the sub account you want to use for dialing out. Incoming calls will work by default and will be pushed to your phone, even if the sub account is not selected.

[[File:Voipmssoftphonereg2.png|200px]]

==Setting a Voicemail==
In the softphone, press the menu button on the top right (3 dots), Settings, Account Setup, Advanced Settings and set the option '''VoiceMail Number''' to *97. Once this is done, you will need to configure your voicemail in your VoIP.ms portal. [https://wiki.voip.ms/article/Voicemail See Following Article] to proceed on the configuration at the portal level.

==Setting SMS Messages==

[https://wiki.voip.ms/article/SMS-MMS#Send_and_Receive_Messages_.28via_SIP_MESSAGE_Protocol.29 See Following Article] to set SMS messages.

==VoIP.ms Softphone Call Recording Feature==

To record calls directly from your VoIP.ms softphone, simply place a call and then press on the record button.

[[File:VoIPmsSoftphoneCallRecord.png|200px]]

== VoIP.ms Softphone Call Forwarding Feature==

To forward calls automatically on incoming calls, press the 3 dots button on the top right of your screen, settings, Preferences, Call Forwarding and:
*- Enable the option
*- In '''Forward To''', set the number you want to forward calls to.

You can enable instead the option '''Forward Button'', allowing you to forward calls to an arbitrary number when accepting a call.

== Setting SIP TLS (Encrypted Calls) ==

'''Note:''' You must have already downloaded and configured your softphone. If not done already, please go back to the initial steps on configuring your softphone.

You will first need to enable the encryption setting at your VoIP.ms account level. Please refer [https://wiki.voip.ms/article/Call_Encryption_-_TLS/SRTP to this article] on knowing how to configure SIP TLS on your VoIP.ms main account or sub account.

Once you've enabled encryption on your account:
*open VoIP.ms softphone and click on the 3 dots on the top right of the application, Settings, Account Setup and then Advanced Settings.
*Look for '''Transport Protocol''' option and change it to TLS (SIP).
*Next, look for the option '''Secure Calls''', make sure that the option '''Incoming Calls''' is enabled and that the option '''Outgoing Calls''' is set to '''Required''', and then press on the check button on the top right of your screen.

:: 1) [[File:VoIPmsSoftTLS20250916.png|border|150px]] 2) [[File:VoIPmsSoftTLS2.png|border|150px]]

=FAQ=

'''Multiple Registration'''
*Q - Can I have multiple sub accounts registered on VoIP.ms softphone?
*A - As of 2025-09-04, you can now register multiple sub accounts.

'''Push Notification'''
*Q - Does the softphone offer PUSH notification?
*A - Yes.

'''Registration Persisting Despite the VoIP.ms Application Being Removed'''
*Q - My main account / sub account still shows registered despite removing the VoIP.ms softphone
*A - Your credentials are in the PUSH server. To resolve this:
**Head into your VoIP.ms portal.
**For the main account, head to Main Menu, Account Settings, Security tab and then change your SIP/IAX password.
**For a sub account, head to Sub Account, Manage Sub Account, edit the sub account and then change your SIP/IAX password.

VoIP.ms Softphone

2025-12-09T01:25:22Z

Roy:

<div><ul>
<li style="display: inline-block;">
[[File:Logo-VoIPms-light.png|none|600px|link=http://www.voip.ms]]
</li>

Simplify the way you communicate, whether you’re in the office or on the go. VoIP.ms Softphone provides you the flexibility you need.
Available on both the App Store(2) and Google Play.

(1) '''The VoIP.ms Softphone is in BETA and will be available free of charge starting on May 2025, until further notice. '''

__TOC__

You will find below all the steps to succesfully start using VoIP.ms Softphone.

= Step 1 - Downloading VoIP.ms Softphone =

: Download the softphone at the following URL:
:* Android - [https://play.google.com/store/apps/details?id=ms.voip.softphone.android&pli=1 here]
:* Apple - [https://apps.apple.com/app/voip-ms-softphone/id6748383110 here]

=Step 2 - Initial Configuration of VoIP.ms Softphone=

: After downloading the softphone to your mobile device, open the app to begin. Once the initial verification and setup are complete, you’ll be prompted to enter your username, password, and domain on the login screen.

::[[File:VoIPmsSoftphone12025.png|border|150px]]

:* Username: This can be found by logging into your VoIP.ms customer portal and look for the SIP/IAX SIP username (6-digit number or the 6 digit followed by '''_sub-account-name''').
:* Password: If you haven’t changed it, this is the same password you use to access your VoIP.ms portal.
:* Domain: Choose the server closest to your location. For a full list of available servers, please refer to [https://wiki.voip.ms/article/Servers this article].

: Once you’ve entered the required information, tap the check mark icon in the top-right corner of your screen to proceed.

<div style="margin-left:10px;
padding:5px;
border-left: 6px solid rgb(208, 56, 45, 0.8);
box-shadow: 8px 6px 9px -2px #f2f2f2;
background-color: rgba(208, 56, 45, 0.08);
width:70vw;">
🚨 '''IMPORTANT'''
: <b style="color:#b30000;">Are you located outside of the Americas?</b> If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]
: US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.
</div>

::[[File:VoIPmsSoftphone22025.png|border|150px]]

=Step 3 - Permission Allowance=

: Next, you will be prompted to allow several permissions to ensure the VoIP.ms softphone works as intended:

:: 1) [[File:VoIPmsSoftphonetos2025.png|border|150px]] 2) [[File:VoIPmsSoftphone3.png|border|150px]] 3) [[File:VoIPmsSoftphone4.png|border|150px]] 4) [[File:VoIPmsSoftphone5.png|border|150px]] 5) [[File:VoIPmsSoftphone6.png|border|150px]] 6) [[File:VoIPmsSoftphone7.png|border|150px]]

::* ''' End User License Agreement (EULA)''': All the information related to VoIP.ms EULA
::* '''Notifications Permission''': Allows the app to notify you of missed calls, voicemail messages, and other important alerts.
::* '''Microphone Permission''': Enables the app to transmit your voice clearly during calls.
::* '''Phone Permission''': Enhances interoperability between the app and your mobile device’s native calling features.
::* '''Contacts Permission''': Integrates your phone’s contact list, making it easier to place calls directly through the app.
::* '''Full-Screen on Incoming Calls''': Ensures that incoming calls are displayed in full-screen mode rather than as a small popup.

=Step 4 - Ready to Make Phone Calls!=
: Once you’ve granted all the necessary permissions, you’re ready to start making calls!
: To test your setup, you can dial 4443, which will initiate a call quality test. After the message plays, you’ll have the opportunity to speak and hear your voice played back.

::[[File:VoIPmsSoftphone8.png|border|150px]]

=Step 5 - Setting Other Features=

==Multi-Account Registration==
As of 2025-09-04, you can now register multiple accounts on your VoIP.ms softphone!

You can quickly create new registration under Settings (3 dots on top right of your softphone), Accounts and pressing the '''+'''.

As for quickly changing from 1 account to another to make outgoing calls, you can do so on the dialer page by pressing the account status on top left, and then changing to the sub account you want to use for dialing out. Incoming calls will work by default and will be pushed to your phone, even if the sub account is not selected.

[[File:Voipmssoftphonereg2.png|200px]]

==Setting a Voicemail==
In the softphone, press the menu button on the top right (3 dots), Settings, Account Setup, Advanced Settings and set the option '''VoiceMail Number''' to *97. Once this is done, you will need to configure your voicemail in your VoIP.ms portal. [https://wiki.voip.ms/article/Voicemail See Following Article] to proceed on the configuration at the portal level.

==Setting SMS Messages==

[https://wiki.voip.ms/article/SMS-MMS#Send_and_Receive_Messages_.28via_SIP_MESSAGE_Protocol.29 See Following Article] to set SMS messages.

==VoIP.ms Softphone Call Recording Feature==

To record calls directly from your VoIP.ms softphone, simply place a call and then press on the record button.

[[File:VoIPmsSoftphoneCallRecord.png|200px]]

== VoIP.ms Softphone Call Forwarding Feature==

To forward calls automatically on incoming calls, press the 3 dots button on the top right of your screen, settings, Preferences, Call Forwarding and:
*- Enable the option
*- In '''Forward To''', set the number you want to forward calls to.

You can enable instead the option '''Forward Button'', allowing you to forward calls to an arbitrary number when accepting a call.

== Setting SIP TLS (Encrypted Calls) ==

'''Note:''' You must have already downloaded and configured your softphone. If not done already, please go back to the initial steps on configuring your softphone.

You will first need to enable the encryption setting at your VoIP.ms account level. Please refer [https://wiki.voip.ms/article/Call_Encryption_-_TLS/SRTP to this article] on knowing how to configure SIP TLS on your VoIP.ms main account or sub account.

Once you've enabled encryption on your account:
*open VoIP.ms softphone and click on the 3 dots on the top right of the application, Settings, Account Setup and then Advanced Settings.
*Look for '''Transport Protocol''' option and change it to TLS (SIP).
*Next, look for the option '''Secure Calls''', make sure that the option '''Incoming Calls''' is enabled and that the option '''Outgoing Calls''' is set to '''Required''', and then press on the check button on the top right of your screen.

:: 1) [[File:VoIPmsSoftTLS20250916.png|border|150px]] 2) [[File:VoIPmsSoftTLS2.png|border|150px]]

=FAQ=

'''Multiple Registration'''
*Q - Can I have multiple sub accounts registered on VoIP.ms softphone?
*A - As of 2025-09-04, you can now register multiple sub accounts.

'''Push Notification'''
*Q - Does the softphone offer PUSH notification?
*A - Yes.

'''Registration Persisting Despite the VoIP.ms Application Being Removed'''
*Q - My main account / sub account still shows registered despite removing the VoIP.ms softphone
*A - Your credentials are in the PUSH server. To resolve this:
**Head into your VoIP.ms portal.
**For the main account, head to Main Menu, Account Settings, Security tab and then change your SIP/IAX password.
**For a sub account, head to Sub Account, Manage Sub Account, edit the sub account and then change your SIP/IAX password.

User:Roy/Sandbox

2025-08-04T18:26:54Z

Roy:

==HOW DOES THIS WORK?==
You can use our service to place and receive calls just using your internet connection, no matter where you are as long as you have internet. You can use an IP phone, ATA adapter (to use a traditional phone) or a softphone (an App installed on your cellphone or PC)
==RATES==
VoIP.ms is a prepaid service where you add funds to your account ($15 USD min) and the following rates are deducted from it:

You only pay a monthly fee for each of your numbers + in/out minutes usage.

'''Monthly fee for the phone number'''

*Per minute plan:<br>
$0.85 USD Monthly + $0.009 USD per minute inbound<br>
$0.01 USD outbound per minute for US/CAN<br>

*Flat rate plan:<br>
$4.25 USD Monthly, 3500 free inbound minutes<br>
$0.01 USD outbound per minute for US/CAN<br>

SMS/MMS rates:<br>
$0.0075 USD per SMS<br>
$0.02 USD per MMS<br>
==FIRST STEPS - ADD FUNDS==
1. Go to Finances -> Add funds, and make your 1st payment. DO NOT use the autobilling for your 1st payment.<br>
2. WAIT 5 minutes for balance to be updated and before you try to buy or port a number.<br>
==PORTING FROM VOIPO==
1. Log in to your VoIPo account at account.voipo.com.<br>
2. Go to Menu -> Account -> Invoices<br>
3. Print your invoice and save it as PDF/JPG<br>
4. Now log into your voipms portal and go to DID Numbers -> DID portability<br>
5. Look for "If you want to start a porting process from VOIPo, Click here" and click it<br>
6. Fill in the following:<br>
*VOIPo Account number: One of your voipo phone numbers
*Proof of Ownership: upload your voipo invoice
*List of Numbers: list your voipo number(s) you want to bring
*Click "Submit"

'''Done! The port process takes 1-2 business days an email notification will be send once the port is completed.'''
==SETTING UP YOUR HT==
0. Factory reset your HT, press the RESET button located at the rear panel for 7-10 seconds

1. Pick up your phone and dial *** to access into the system configuration menu, once in there press 0 2 and your device will play back its IP address, a number like 192.168.xxx.xxx, write it down

2. Open a new tab on your web browser and type this number, you will be attempting to log into your device's settings. The password to access is admin

3. Once logged in, head to FXS1 tab and fill the following:

*'''Primary SIP Server:'''
*'''SIP User ID:'''
*'''Authenticate ID:'''
*'''Authenticate Password:'''
*Name:

4. Extra settings for better performance (might not be available for some models):

*SIP Transport: TCP
*Register Expiration: 5 minutes or 300 seconds
*Enable SIP OPTIONS keep alive: Yes
*Allow incoming SIP messages from SIP Proxy only: Yes
*Use P-Access-Network-Info Header: No
*Use P-Emergency-info Header: No

User:Roy/Sandbox

2025-08-04T18:24:23Z

Roy:

==HOW DOES THIS WORK?==
You can use our service to place and receive calls just using your internet connection, no matter where you are as long as you have internet. You can use an IP phone, ATA adapter (to use a traditional phone) or a softphone (an App installed on your cellphone or PC)
==RATES==
VoIP.ms is a prepaid service where you add funds to your account ($15 USD min) and the following rates are deducted from it:

You only pay a monthly fee for each of your numbers + in/out minutes usage.

'''Monthly fee for the phone number'''

*Per minute plan:<br>
$0.85 USD Monthly + $0.009 USD per minute inbound<br>
$0.01 USD outbound per minute for US/CAN<br>

*Flat rate plan:<br>
$4.25 USD Monthly, 3500 free inbound minutes<br>
$0.01 USD outbound per minute for US/CAN<br>

SMS/MMS rates:<br>
$0.0075 USD per SMS<br>
$0.02 USD per MMS<br>
==FIRST STEPS - ADD FUNDS==
1. Go to Finances -> Add funds, and make your 1st payment. DO NOT use the autobilling for your 1st payment.<br>
2. WAIT 5 minutes for balance to be updated and before you try to buy or port a number.<br>
==PORTING FROM VOIPO==
1. Log in to your VoIPo account at account.voipo.com.<br>
2. Go to Menu -> Account -> Invoices<br>
3. Print your invoice and save it as PDF/JPG<br>
4. Now log into your voipms portal and go to DID Numbers -> DID portability<br>
5. Look for "If you want to start a porting process from VOIPo, Click here" and click it<br>
6. Fill in the following:<br>
*VOIPo Account number: One of your voipo phone numbers
*Proof of Ownership: upload your voipo invoice
*List of Numbers: list your voipo number(s) you want to bring
*Click "Submit"

'''Done! The port process takes 1-2 business days an email notification will be send once the port is completed.'''
==SETTING UP YOUR HT==
0. Factory reset your HT, press the RESET button located at the rear panel for 7-10 seconds

1. Pick up your phone and dial *** to access into the system configuration menu, once in there press 0 2 and your device will play back its IP address, a number like 192.168.xxx.xxx, write it down

2. Open a new tab on your web browser and type this number, you will be attempting to log into your device's settings. The password to access is admin

3. Once logged in, head to FXS1 tab and fill the following:

*Primary SIP Server:
*SIP User ID:
*Authenticate ID:
*Authenticate Password:
*Name:

4. Extra settings for better performance (might not be available for some models):

*SIP Transport: TCP
*Register Expiration: 5 minutes or 300 seconds
*Enable SIP OPTIONS keep alive: Yes
*Allow incoming SIP messages from SIP Proxy only: Yes
*Use P-Access-Network-Info Header: No
*Use P-Emergency-info Header: No

User:Roy/Sandbox

2025-08-04T18:23:07Z

Roy:

==HOW DOES THIS WORK?==
You can use our service to place and receive calls just using your internet connection, no matter where you are as long as you have internet. You can use an IP phone, ATA adapter (to use a traditional phone) or a softphone (an App installed on your cellphone or PC)
==RATES==
VoIP.ms is a prepaid service where you add funds to your account ($15 USD min) and the following rates are deducted from it:

You only pay a monthly fee for each of your numbers + in/out minutes usage.

'''Monthly fee for the phone number'''

*Per minute plan:<br>
$0.85 USD Monthly + $0.009 USD per minute inbound<br>
$0.01 USD outbound per minute for US/CAN<br>

*Flat rate plan:<br>
$4.25 USD Monthly, 3500 free inbound minutes<br>
$0.01 USD outbound per minute for US/CAN<br>

SMS/MMS rates:<br>
$0.0075 USD per SMS<br>
$0.02 USD per MMS<br>
==FIRST STEPS - ADD FUNDS==
1. Go to Finances -> Add funds, and make your 1st payment. DO NOT use the autobilling for your 1st payment.<br>
2. WAIT 5 minutes for balance to be updated and before you try to buy or port a number.<br>
==PORTING FROM VOIPO==
1. Log in to your VoIPo account at account.voipo.com.<br>
2. Go to Menu -> Account -> Invoices<br>
3. Print your invoice and save it as PDF/JPG<br>
4. Now log into your voipms portal and go to DID Numbers -> DID portability<br>
5. Look for "If you want to start a porting process from VOIPo, Click here" and click it<br>
6. Fill in the following:<br>
*VOIPo Account number: One of your voipo phone numbers
*Proof of Ownership: upload your voipo invoice
*List of Numbers: list your voipo number(s) you want to bring
*Click "Submit"

Done! The port process takes 1-2 business days an email notification will be send once the port is completed.
==SETTING UP YOUR HT==
0. Factory reset your HT, press the RESET button located at the rear panel for 7-10 seconds

1. Pick up your phone and dial *** to access into the system configuration menu, once in there press 0 2 and your device will play back its IP address, a number like 192.168.xxx.xxx, write it down

2. Open a new tab on your web browser and type this number, you will be attempting to log into your device's settings. The password to access is admin

3. Once logged in, head to FXS1 tab and fill the following:

*Primary SIP Server:
*SIP User ID:
*Authenticate ID:
*Authenticate Password:
*Name:

4. Extra settings for better performance (might not be available for some models):

*SIP Transport: TCP
*Register Expiration: 5 minutes or 300 seconds
*Enable SIP OPTIONS keep alive: Yes
*Allow incoming SIP messages from SIP Proxy only: Yes
*Use P-Access-Network-Info Header: No
*Use P-Emergency-info Header: No

User:Roy/Sandbox

2025-08-04T18:20:56Z

Roy:

==HOW DOES THIS WORK?==
You can use our service to place and receive calls just using your internet connection, no matter where you are as long as you have internet. You can use an IP phone, ATA adapter (to use a traditional phone) or a softphone (an App installed on your cellphone or PC)
==RATES==
VoIP.ms is a prepaid service where you add funds to your account ($15 USD min) and the following rates are deducted from it:

You only pay a monthly fee for each of your numbers + in/out minutes usage.

'''Monthly fee for the phone number'''

*Per minute plan:<br>
$0.85 USD Monthly + $0.009 USD per minute inbound<br>
$0.01 USD outbound per minute for US/CAN<br>

*Flat rate plan:<br>
$4.25 USD Monthly, 3500 free inbound minutes<br>
$0.01 USD outbound per minute for US/CAN<br>

SMS/MMS rates:<br>
$0.0075 USD per SMS<br>
$0.02 USD per MMS<br>
==FIRST STEPS - ADD FUNDS==
1. Go to Finances -> Add funds, and make your 1st payment. DO NOT use the autobilling for your 1st payment.
2. WAIT 5 minutes for balance to be updated and before you try to buy or port a number.
==PORTING FROM VOIPO==
1. Log in to your VoIPo account at account.voipo.com.
2. Go to Menu -> Account -> Invoices
3. Print your invoice and save it as PDF/JPG
4. Now log into your voipms portal and go to DID Numbers -> DID portability
5. Look for "If you want to start a porting process from VOIPo, Click here" and click it
6. Fill in the following:
*VOIPo Account number: One of your voipo phone numbers
*Proof of Ownership: upload your voipo invoice
*List of Numbers: list your voipo number(s) you want to bring
*Click "Submit"

Done! The port process takes 1-2 business days an email notification will be send once the port is completed.
==SETTING UP YOUR HT==
0. Factory reset your HT, press the RESET button located at the rear panel for 7-10 seconds

1. Pick up your phone and dial *** to access into the system configuration menu, once in there press 0 2 and your device will play back its IP address, a number like 192.168.xxx.xxx, write it down

2. Open a new tab on your web browser and type this number, you will be attempting to log into your device's settings. The password to access is admin

3. Once logged in, head to FXS1 tab and fill the following:

*Primary SIP Server:
*SIP User ID:
*Authenticate ID:
*Authenticate Password:
*Name:

4. Extra settings for better performance (might not be available for some models):

*SIP Transport: TCP
*Register Expiration: 5 minutes or 300 seconds
*Enable SIP OPTIONS keep alive: Yes
*Allow incoming SIP messages from SIP Proxy only: Yes
*Use P-Access-Network-Info Header: No
*Use P-Emergency-info Header: No

User:Roy/Sandbox

2025-08-04T18:20:26Z

Roy:

==HOW DOES THIS WORK?==
You can use our service to place and receive calls just using your internet connection, no matter where you are as long as you have internet. You can use an IP phone, ATA adapter (to use a traditional phone) or a softphone (an App installed on your cellphone or PC)
==RATES==
VoIP.ms is a prepaid service where you add funds to your account ($15 USD min) and the following rates are deducted from it:

You only pay a monthly fee for each of your numbers + in/out minutes usage.

'''Monthly fee for the phone number'''

*Per minute plan:<br>
$0.85 USD Monthly + $0.009 USD per minute inbound<br>
$0.01 USD outbound per minute for US/CAN<br>

-> Flat rate plan:<br>
$4.25 USD Monthly, 3500 free inbound minutes<br>
$0.01 USD outbound per minute for US/CAN<br>

SMS/MMS rates:
$0.0075 USD per SMS
$0.02 USD per MMS
==FIRST STEPS - ADD FUNDS==
1. Go to Finances -> Add funds, and make your 1st payment. DO NOT use the autobilling for your 1st payment.
2. WAIT 5 minutes for balance to be updated and before you try to buy or port a number.
==PORTING FROM VOIPO==
1. Log in to your VoIPo account at account.voipo.com.
2. Go to Menu -> Account -> Invoices
3. Print your invoice and save it as PDF/JPG
4. Now log into your voipms portal and go to DID Numbers -> DID portability
5. Look for "If you want to start a porting process from VOIPo, Click here" and click it
6. Fill in the following:
*VOIPo Account number: One of your voipo phone numbers
*Proof of Ownership: upload your voipo invoice
*List of Numbers: list your voipo number(s) you want to bring
*Click "Submit"

Done! The port process takes 1-2 business days an email notification will be send once the port is completed.
==SETTING UP YOUR HT==
0. Factory reset your HT, press the RESET button located at the rear panel for 7-10 seconds

1. Pick up your phone and dial *** to access into the system configuration menu, once in there press 0 2 and your device will play back its IP address, a number like 192.168.xxx.xxx, write it down

2. Open a new tab on your web browser and type this number, you will be attempting to log into your device's settings. The password to access is admin

3. Once logged in, head to FXS1 tab and fill the following:

*Primary SIP Server:
*SIP User ID:
*Authenticate ID:
*Authenticate Password:
*Name:

4. Extra settings for better performance (might not be available for some models):

*SIP Transport: TCP
*Register Expiration: 5 minutes or 300 seconds
*Enable SIP OPTIONS keep alive: Yes
*Allow incoming SIP messages from SIP Proxy only: Yes
*Use P-Access-Network-Info Header: No
*Use P-Emergency-info Header: No

User:Roy/Sandbox

2025-08-04T18:18:48Z

Roy:

==HOW DOES THIS WORK?==
You can use our service to place and receive calls just using your internet connection, no matter where you are as long as you have internet. You can use an IP phone, ATA adapter (to use a traditional phone) or a softphone (an App installed on your cellphone or PC)
==RATES==
VoIP.ms is a prepaid service where you add funds to your account ($15 USD min) and the following rates are deducted from it:

You only pay a monthly fee for each of your numbers + in/out minutes usage.

'''Monthly fee for the phone number'''

-> Per minute plan:
$0.85 USD Monthly + $0.009 USD per minute inbound
$0.01 USD outbound per minute for US/CAN

-> Flat rate plan:
$4.25 USD Monthly, 3500 free inbound minutes.
$0.01 USD outbound per minute for US/CAN

SMS/MMS rates:
$0.0075 USD per SMS
$0.02 USD per MMS
==FIRST STEPS - ADD FUNDS==
1. Go to Finances -> Add funds, and make your 1st payment. DO NOT use the autobilling for your 1st payment.
2. WAIT 5 minutes for balance to be updated and before you try to buy or port a number.
==PORTING FROM VOIPO==
1. Log in to your VoIPo account at account.voipo.com.
2. Go to Menu -> Account -> Invoices
3. Print your invoice and save it as PDF/JPG
4. Now log into your voipms portal and go to DID Numbers -> DID portability
5. Look for "If you want to start a porting process from VOIPo, Click here" and click it
6. Fill in the following:
*VOIPo Account number: One of your voipo phone numbers
*Proof of Ownership: upload your voipo invoice
*List of Numbers: list your voipo number(s) you want to bring
*Click "Submit"

Done! The port process takes 1-2 business days an email notification will be send once the port is completed.
==SETTING UP YOUR HT==
0. Factory reset your HT, press the RESET button located at the rear panel for 7-10 seconds

1. Pick up your phone and dial *** to access into the system configuration menu, once in there press 0 2 and your device will play back its IP address, a number like 192.168.xxx.xxx, write it down

2. Open a new tab on your web browser and type this number, you will be attempting to log into your device's settings. The password to access is admin

3. Once logged in, head to FXS1 tab and fill the following:

*Primary SIP Server:
*SIP User ID:
*Authenticate ID:
*Authenticate Password:
*Name:

4. Extra settings for better performance (might not be available for some models):

*SIP Transport: TCP
*Register Expiration: 5 minutes or 300 seconds
*Enable SIP OPTIONS keep alive: Yes
*Allow incoming SIP messages from SIP Proxy only: Yes
*Use P-Access-Network-Info Header: No
*Use P-Emergency-info Header: No

User:Roy/Sandbox

2025-08-04T18:17:32Z

Roy:

==HOW DOES THIS WORK?==
You can use our service to place and receive calls just using your internet connection, no matter where you are as long as you have internet. You can use an IP phone, ATA adapter (to use a traditional phone) or a softphone (an App installed on your cellphone or PC)
==RATES==
VoIP.ms is a prepaid service where you add funds to your account ($15 USD min) and the following rates are deducted from it:

You only pay a monthly fee for each of your numbers + in/out minutes usage.

<b style="color:#b30000;">Monthly fee for the phone number</b><br>

-> Per minute plan:
$0.85 USD Monthly + $0.009 USD per minute inbound
$0.01 USD outbound per minute for US/CAN

-> Flat rate plan:
$4.25 USD Monthly, 3500 free inbound minutes.
$0.01 USD outbound per minute for US/CAN

SMS/MMS rates:
$0.0075 USD per SMS
$0.02 USD per MMS
==FIRST STEPS - ADD FUNDS==
1. Go to Finances -> Add funds, and make your 1st payment. DO NOT use the autobilling for your 1st payment.
2. WAIT 5 minutes for balance to be updated and before you try to buy or port a number.
==PORTING FROM VOIPO==
1. Log in to your VoIPo account at account.voipo.com.
2. Go to Menu -> Account -> Invoices
3. Print your invoice and save it as PDF/JPG
4. Now log into your voipms portal and go to DID Numbers -> DID portability
5. Look for "If you want to start a porting process from VOIPo, Click here" and click it
6. Fill in the following:
*VOIPo Account number: One of your voipo phone numbers
*Proof of Ownership: upload your voipo invoice
*List of Numbers: list your voipo number(s) you want to bring
*Click "Submit"

Done! The port process takes 1-2 business days an email notification will be send once the port is completed.
==SETTING UP YOUR HT==
0. Factory reset your HT, press the RESET button located at the rear panel for 7-10 seconds

1. Pick up your phone and dial *** to access into the system configuration menu, once in there press 0 2 and your device will play back its IP address, a number like 192.168.xxx.xxx, write it down

2. Open a new tab on your web browser and type this number, you will be attempting to log into your device's settings. The password to access is admin

3. Once logged in, head to FXS1 tab and fill the following:

*Primary SIP Server:
*SIP User ID:
*Authenticate ID:
*Authenticate Password:
*Name:

4. Extra settings for better performance (might not be available for some models):

*SIP Transport: TCP
*Register Expiration: 5 minutes or 300 seconds
*Enable SIP OPTIONS keep alive: Yes
*Allow incoming SIP messages from SIP Proxy only: Yes
*Use P-Access-Network-Info Header: No
*Use P-Emergency-info Header: No

User:Roy/Sandbox

2025-08-04T18:14:52Z

Roy:

==HOW DOES THIS WORK?==
You can use our service to place and receive calls just using your internet connection, no matter where you are as long as you have internet. You can use an IP phone, ATA adapter (to use a traditional phone) or a softphone (an App installed on your cellphone or PC)
==RATES==
VoIP.ms is a prepaid service where you add funds to your account ($15 USD min) and the following rates are deducted from it:

You only pay a monthly fee for each of your numbers + in/out minutes usage.

*Monthly fee for the phone number:

-> Per minute plan:
$0.85 USD Monthly + $0.009 USD per minute inbound
$0.01 USD outbound per minute for US/CAN

-> Flat rate plan:
$4.25 USD Monthly, 3500 free inbound minutes.
$0.01 USD outbound per minute for US/CAN

SMS/MMS rates:
$0.0075 USD per SMS
$0.02 USD per MMS
==FIRST STEPS - ADD FUNDS==
1. Go to Finances -> Add funds, and make your 1st payment. DO NOT use the autobilling for your 1st payment.
2. WAIT 5 minutes for balance to be updated and before you try to buy or port a number.
==PORTING FROM VOIPO==
1. Log in to your VoIPo account at account.voipo.com.
2. Go to Menu -> Account -> Invoices
3. Print your invoice and save it as PDF/JPG
4. Now log into your voipms portal and go to DID Numbers -> DID portability
5. Look for "If you want to start a porting process from VOIPo, Click here" and click it
6. Fill in the following:
*VOIPo Account number: One of your voipo phone numbers
*Proof of Ownership: upload your voipo invoice
*List of Numbers: list your voipo number(s) you want to bring
*Click "Submit"

Done! The port process takes 1-2 business days an email notification will be send once the port is completed.
==SETTING UP YOUR HT==
0. Factory reset your HT, press the RESET button located at the rear panel for 7-10 seconds

1. Pick up your phone and dial *** to access into the system configuration menu, once in there press 0 2 and your device will play back its IP address, a number like 192.168.xxx.xxx, write it down

2. Open a new tab on your web browser and type this number, you will be attempting to log into your device's settings. The password to access is admin

3. Once logged in, head to FXS1 tab and fill the following:

*Primary SIP Server:
*SIP User ID:
*Authenticate ID:
*Authenticate Password:
*Name:

4. Extra settings for better performance (might not be available for some models):

*SIP Transport: TCP
*Register Expiration: 5 minutes or 300 seconds
*Enable SIP OPTIONS keep alive: Yes
*Allow incoming SIP messages from SIP Proxy only: Yes
*Use P-Access-Network-Info Header: No
*Use P-Emergency-info Header: No

User:Roy/Sandbox

2025-08-04T18:12:42Z

Roy:

=========================
HOW DOES THIS WORK?
=========================
You can use our service to place and receive calls just using your internet connection, no matter where you are as long as you have internet. You can use an IP phone, ATA adapter (to use a traditional phone) or a softphone (an App installed on your cellphone or PC)
=========================
RATES
=========================
VoIP.ms is a prepaid service where you add funds to your account ($15 USD min) and the following rates are deducted from it:

You only pay a monthly fee for each of your numbers + in/out minutes usage.

*Monthly fee for the phone number:

-> Per minute plan:
$0.85 USD Monthly + $0.009 USD per minute inbound
$0.01 USD outbound per minute for US/CAN

-> Flat rate plan:
$4.25 USD Monthly, 3500 free inbound minutes.
$0.01 USD outbound per minute for US/CAN

SMS/MMS rates:
$0.0075 USD per SMS
$0.02 USD per MMS
=========================
FIRST STEPS - ADD FUNDS
=========================
1. Go to Finances -> Add funds, and make your 1st payment. DO NOT use the autobilling for your 1st payment.
2. WAIT 5 minutes for balance to be updated and before you try to buy or port a number.
=========================
PORTING FROM VOIPO
=========================
1. Log in to your VoIPo account at account.voipo.com.
2. Go to Menu -> Account -> Invoices
3. Print your invoice and save it as PDF/JPG
4. Now log into your voipms portal and go to DID Numbers -> DID portability
5. Look for "If you want to start a porting process from VOIPo, Click here" and click it
6. Fill in the following:
*VOIPo Account number: One of your voipo phone numbers
*Proof of Ownership: upload your voipo invoice
*List of Numbers: list your voipo number(s) you want to bring
*Click "Submit"

Done! The port process takes 1-2 business days an email notification will be send once the port is completed.
=========================
SETTING UP YOUR HT
=========================
0. Factory reset your HT, press the RESET button located at the rear panel for 7-10 seconds

1. Pick up your phone and dial *** to access into the system configuration menu, once in there press 0 2 and your device will play back its IP address, a number like 192.168.xxx.xxx, write it down

2. Open a new tab on your web browser and type this number, you will be attempting to log into your device's settings. The password to access is admin

3. Once logged in, head to FXS1 tab and fill the following:

*Primary SIP Server:
*SIP User ID:
*Authenticate ID:
*Authenticate Password:
*Name:

4. Extra settings for better performance (might not be available for some models):

*SIP Transport: TCP
*Register Expiration: 5 minutes or 300 seconds
*Enable SIP OPTIONS keep alive: Yes
*Allow incoming SIP messages from SIP Proxy only: Yes
*Use P-Access-Network-Info Header: No
*Use P-Emergency-info Header: No

User:Roy/Sandbox

2025-08-04T18:11:22Z

Roy: Blanked the page

User talk:Roy

2025-08-04T18:08:56Z

Roy: /* subject */ new section

Test

== subject ==

test 2

User talk:Roy

2025-08-04T18:08:27Z

Roy: Created page with "Test"

Test

SessionTalk

2025-06-28T15:08:49Z

Roy: /* Basic set up */

Session Talk is a free softphone available for Android and iOS users, it's a great free choice for iOS users. Their free version runs in background and works fine for Android and iOS, the free version does not include SMS SIP so you can only make and receive calls.

==Basic set up==
1. Download <b>"Session Talk"</b> from your phone store.

[[File:Sessiontalk01.png|300px|border]]
<br>
<br>

2. Allow access, notifications and permissions to your app.

[[File:sessiontalk02.png|300px|border]]
<br>
<br>

3. Generic SIP, tap the <b>'i'</b> icon

[[File:Sessiontalk03.png|300px|border]]
<br>
<br>

4. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
<br>

<div style="margin-left:10px;
padding:5px;
border-left: 6px solid rgb(208, 56, 45, 0.8);
box-shadow: 8px 6px 9px -2px #f2f2f2;
background-color: rgba(208, 56, 45, 0.08);
width:70vw;">
🚨 '''IMPORTANT'''
: <b style="color:#b30000;">Are you located outside of the Americas?</b> If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]
: US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.
</div>

[[File:sessiontalk04.png|300px|border]] [[File:Popserver.png|600px|border]]

<br>
<br>

5. Tap the <b>'Enabled'</b> slider. Your account will be ready.

[[File:Sessiontalk06new.png|300px|border]] [[File:Sessiontalk05.png|300px|border]]

<br>
<br>

6. Go to the dialpad and test the audio dialing 4443

[[File:Sessiontalk07.png|300px|border]] [[File:Sessiontalk08.png|300px|border]]

<br>
<br>

7. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerID.png|500px|border]]

SessionTalk

2025-06-28T15:08:18Z

Roy: /* Basic set up */

Session Talk is a free softphone available for Android and iOS users, it's a great free choice for iOS users. Their free version runs in background and works fine for Android and iOS, the free version does not include SMS SIP so you can only make and receive calls.

==Basic set up==
1. Download <b>"Session Talk"</b> from your phone store.

[[File:Sessiontalk01.png|300px|border]]
<br>
<br>

2. Allow access, notifications and permissions to your app.

[[File:sessiontalk02.png|300px|border]]
<br>
<br>

3. Generic SIP, tap the <b>'i'</b> icon

[[File:Sessiontalk03.png|300px|border]]
<br>
<br>

4. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
<br>
<be>

<div style="margin-left:10px;
padding:5px;
border-left: 6px solid rgb(208, 56, 45, 0.8);
box-shadow: 8px 6px 9px -2px #f2f2f2;
background-color: rgba(208, 56, 45, 0.08);
width:70vw;">
🚨 '''IMPORTANT'''
: <b style="color:#b30000;">Are you located outside of the Americas?</b> If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]
: US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.
</div>

[[File:sessiontalk04.png|300px|border]] [[File:Popserver.png|600px|border]]

<br>
<br>

5. Tap the <b>'Enabled'</b> slider. Your account will be ready.

[[File:Sessiontalk06new.png|300px|border]] [[File:Sessiontalk05.png|300px|border]]

<br>
<br>

6. Go to the dialpad and test the audio dialing 4443

[[File:Sessiontalk07.png|300px|border]] [[File:Sessiontalk08.png|300px|border]]

<br>
<br>

7. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerID.png|500px|border]]

Microsip

2025-06-28T15:06:10Z

Roy: /* Basic setup */

==Tutorial Video==

[[Image:MicroSIPthumbnail.jpg|200px|link=https://www.youtube.com/watch?v=2UJm2J0j-2k]]

This is the very basic set up for MicroSIP, there are only a few steps needed to have your device up and running. If you wish to improve your softphone performance or enable some features, refer to the advanced section.

==Basic setup==
1. Download and install '''MicroSIP''' from this [https://www.microsip.org/downloads/current link.]

2. Once downloaded and installed, start MicroSIP and on the welcome screen head onto the arrow pointing down on the top right of the softphone application > Add Account.

[[File:Microsip.png|300px|border]]
<br>
<br>

3. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''SIP Server:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
<br>

Finally, press '''Save''' and you are done configuring MicroSIP.

<div style="margin-left:10px;
padding:5px;
border-left: 6px solid rgb(208, 56, 45, 0.8);
box-shadow: 8px 6px 9px -2px #f2f2f2;
background-color: rgba(208, 56, 45, 0.08);
width:70vw;">
🚨 '''IMPORTANT'''
: <b style="color:#b30000;">Are you located outside of the Americas?</b> If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]
: US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.
</div>

[[File:Microsip3.png|300px|border]] [[File:Popserver.png|600px|border]]
<br>
<br>

4. Go to the dialpad and test the audio dialing 4443

[[File:Microsip4.png|300px|border]] [[File:Microsip5.png|300px|border]]
<br>
<br>

5. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerIDnumber.png|500px|border]]

==Additional Settings (Optional)==

===TLS SRTP===

In order to enable TLS SRTP (call encryption), you will first need to enable this feature by modifying your main account under Main Menu > Account Settings > Advanced tab and setting '''Encrypted SIP Traffic''' to '''Yes'''

Once done, go into the menu option (arrow pointing down) on the top right of MicroSIP > Edit Account and set the following options:
:- Media Encryption: Mandatory SRTP
:- Transport: TLS

[[File:microSIPTLS.png|thumb|none|600px|Click to enlarge]]

Save and then head once again on the top right of MicroSIP > Settings and once there, modify '''Source Port''' option to 5061 and RTP to 10001 to 20000.

Save these settings and you will now

[[File:microSIP4.png|thumb|none|600px|Click to enlarge]]

===Some additional settings===
By heading into the menu option (arrow pointing down) on the top right of MicroSIP > Settings there are some settings that can be improved in order to avoid any issues while on a call:

:- Enabled Codecs: Only have G711u allowed (or GSM if you have a slow internet connection)
:- Source port: Set it to 5060 (5080 or 42872 for alternate ports) or 5061 (5081 or 42873 for alternate ports) for call encryption
:- RTP Ports: Set the minimum to 10001 and maximum to 20000
:- EC: Make sure this option is enabled. This is an Echo Cancellation option

Otherwise, there are many other options that you can customize like the ring tone you will hear when someone calls among many other options you can customize or enable that you can have a look into. You can also consult [https://www.microsip.org/help/this link] if you have doubts on the options MicroSIP offers.

Microsip

2025-06-28T15:05:39Z

Roy: /* Basic setup */

==Tutorial Video==

[[Image:MicroSIPthumbnail.jpg|200px|link=https://www.youtube.com/watch?v=2UJm2J0j-2k]]

This is the very basic set up for MicroSIP, there are only a few steps needed to have your device up and running. If you wish to improve your softphone performance or enable some features, refer to the advanced section.

==Basic setup==
1. Download and install '''MicroSIP''' from this [https://www.microsip.org/downloads/current link.]

2. Once downloaded and installed, start MicroSIP and on the welcome screen head onto the arrow pointing down on the top right of the softphone application > Add Account.

[[File:Microsip.png|300px|border]]
<br>
<br>

3. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''SIP Server:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
<br>

Finally, press '''Save''' and you are done configuring MicroSIP.

<div style="margin-left:10px;
padding:5px;
border-left: 6px solid rgb(208, 56, 45, 0.8);
box-shadow: 8px 6px 9px -2px #f2f2f2;
background-color: rgba(208, 56, 45, 0.08);
width:70vw;">
🚨 '''IMPORTANT'''
: <b style="color:#b30000;">Are you located outside of the Americas? If so, please use any of the international servers</b> [https://wiki.voip.ms/article/Choosing_Server Servers list]
: US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.
</div>

[[File:Microsip3.png|300px|border]] [[File:Popserver.png|600px|border]]
<br>
<br>

4. Go to the dialpad and test the audio dialing 4443

[[File:Microsip4.png|300px|border]] [[File:Microsip5.png|300px|border]]
<br>
<br>

5. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerIDnumber.png|500px|border]]

==Additional Settings (Optional)==

===TLS SRTP===

In order to enable TLS SRTP (call encryption), you will first need to enable this feature by modifying your main account under Main Menu > Account Settings > Advanced tab and setting '''Encrypted SIP Traffic''' to '''Yes'''

Once done, go into the menu option (arrow pointing down) on the top right of MicroSIP > Edit Account and set the following options:
:- Media Encryption: Mandatory SRTP
:- Transport: TLS

[[File:microSIPTLS.png|thumb|none|600px|Click to enlarge]]

Save and then head once again on the top right of MicroSIP > Settings and once there, modify '''Source Port''' option to 5061 and RTP to 10001 to 20000.

Save these settings and you will now

[[File:microSIP4.png|thumb|none|600px|Click to enlarge]]

===Some additional settings===
By heading into the menu option (arrow pointing down) on the top right of MicroSIP > Settings there are some settings that can be improved in order to avoid any issues while on a call:

:- Enabled Codecs: Only have G711u allowed (or GSM if you have a slow internet connection)
:- Source port: Set it to 5060 (5080 or 42872 for alternate ports) or 5061 (5081 or 42873 for alternate ports) for call encryption
:- RTP Ports: Set the minimum to 10001 and maximum to 20000
:- EC: Make sure this option is enabled. This is an Echo Cancellation option

Otherwise, there are many other options that you can customize like the ring tone you will hear when someone calls among many other options you can customize or enable that you can have a look into. You can also consult [https://www.microsip.org/help/this link] if you have doubts on the options MicroSIP offers.

Microsip

2025-06-28T15:04:07Z

Roy: /* Basic setup */

==Tutorial Video==

[[Image:MicroSIPthumbnail.jpg|200px|link=https://www.youtube.com/watch?v=2UJm2J0j-2k]]

This is the very basic set up for MicroSIP, there are only a few steps needed to have your device up and running. If you wish to improve your softphone performance or enable some features, refer to the advanced section.

==Basic setup==
1. Download and install '''MicroSIP''' from this [https://www.microsip.org/downloads/current link.]

2. Once downloaded and installed, start MicroSIP and on the welcome screen head onto the arrow pointing down on the top right of the softphone application > Add Account.

[[File:Microsip.png|300px|border]]
<br>
<br>

3. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''SIP Server:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
<br>

Finally, press '''Save''' and you are done configuring MicroSIP.

<div style="margin-left:10px;
padding:5px;
border-left: 6px solid rgb(208, 56, 45, 0.8);
box-shadow: 8px 6px 9px -2px #f2f2f2;
background-color: rgba(208, 56, 45, 0.08);
width:70vw;">
🚨 '''IMPORTANT'''
: Are you located outside of the Americas? If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]
: US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.
</div>

[[File:Microsip3.png|300px|border]] [[File:Popserver.png|600px|border]]
<br>
<br>

4. Go to the dialpad and test the audio dialing 4443

[[File:Microsip4.png|300px|border]] [[File:Microsip5.png|300px|border]]
<br>
<br>

5. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerIDnumber.png|500px|border]]

==Additional Settings (Optional)==

===TLS SRTP===

In order to enable TLS SRTP (call encryption), you will first need to enable this feature by modifying your main account under Main Menu > Account Settings > Advanced tab and setting '''Encrypted SIP Traffic''' to '''Yes'''

Once done, go into the menu option (arrow pointing down) on the top right of MicroSIP > Edit Account and set the following options:
:- Media Encryption: Mandatory SRTP
:- Transport: TLS

[[File:microSIPTLS.png|thumb|none|600px|Click to enlarge]]

Save and then head once again on the top right of MicroSIP > Settings and once there, modify '''Source Port''' option to 5061 and RTP to 10001 to 20000.

Save these settings and you will now

[[File:microSIP4.png|thumb|none|600px|Click to enlarge]]

===Some additional settings===
By heading into the menu option (arrow pointing down) on the top right of MicroSIP > Settings there are some settings that can be improved in order to avoid any issues while on a call:

:- Enabled Codecs: Only have G711u allowed (or GSM if you have a slow internet connection)
:- Source port: Set it to 5060 (5080 or 42872 for alternate ports) or 5061 (5081 or 42873 for alternate ports) for call encryption
:- RTP Ports: Set the minimum to 10001 and maximum to 20000
:- EC: Make sure this option is enabled. This is an Echo Cancellation option

Otherwise, there are many other options that you can customize like the ring tone you will hear when someone calls among many other options you can customize or enable that you can have a look into. You can also consult [https://www.microsip.org/help/this link] if you have doubts on the options MicroSIP offers.

Microsip

2025-06-28T15:03:18Z

Roy: /* Basic setup */

==Tutorial Video==

[[Image:MicroSIPthumbnail.jpg|200px|link=https://www.youtube.com/watch?v=2UJm2J0j-2k]]

This is the very basic set up for MicroSIP, there are only a few steps needed to have your device up and running. If you wish to improve your softphone performance or enable some features, refer to the advanced section.

==Basic setup==
1. Download and install '''MicroSIP''' from this [https://www.microsip.org/downloads/current link.]

2. Once downloaded and installed, start MicroSIP and on the welcome screen head onto the arrow pointing down on the top right of the softphone application > Add Account.

[[File:Microsip.png|300px|border]]
<br>
<br>

3. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''SIP Server:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
<br>

Finally, press '''Save''' and you are done configuring MicroSIP.

<div style="margin-left:50px;
padding:5px;
border-left: 6px solid rgb(208, 56, 45, 0.8);
box-shadow: 8px 6px 9px -2px #f2f2f2;
background-color: rgba(208, 56, 45, 0.08);
width:70vw;">
🚨 '''IMPORTANT'''
: >Are you located outside of the Americas? If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]
: US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.
</div>

<b style="color:#b30000;">IMPORTANT:</b><br>
<b style="color:#b30000;">Are you located outside of the Americas? If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]</b><br>

US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.

[[File:Microsip3.png|300px|border]] [[File:Popserver.png|600px|border]]
<br>
<br>

4. Go to the dialpad and test the audio dialing 4443

[[File:Microsip4.png|300px|border]] [[File:Microsip5.png|300px|border]]
<br>
<br>

5. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerIDnumber.png|500px|border]]

==Additional Settings (Optional)==

===TLS SRTP===

In order to enable TLS SRTP (call encryption), you will first need to enable this feature by modifying your main account under Main Menu > Account Settings > Advanced tab and setting '''Encrypted SIP Traffic''' to '''Yes'''

Once done, go into the menu option (arrow pointing down) on the top right of MicroSIP > Edit Account and set the following options:
:- Media Encryption: Mandatory SRTP
:- Transport: TLS

[[File:microSIPTLS.png|thumb|none|600px|Click to enlarge]]

Save and then head once again on the top right of MicroSIP > Settings and once there, modify '''Source Port''' option to 5061 and RTP to 10001 to 20000.

Save these settings and you will now

[[File:microSIP4.png|thumb|none|600px|Click to enlarge]]

===Some additional settings===
By heading into the menu option (arrow pointing down) on the top right of MicroSIP > Settings there are some settings that can be improved in order to avoid any issues while on a call:

:- Enabled Codecs: Only have G711u allowed (or GSM if you have a slow internet connection)
:- Source port: Set it to 5060 (5080 or 42872 for alternate ports) or 5061 (5081 or 42873 for alternate ports) for call encryption
:- RTP Ports: Set the minimum to 10001 and maximum to 20000
:- EC: Make sure this option is enabled. This is an Echo Cancellation option

Otherwise, there are many other options that you can customize like the ring tone you will hear when someone calls among many other options you can customize or enable that you can have a look into. You can also consult [https://www.microsip.org/help/this link] if you have doubts on the options MicroSIP offers.

Microsip

2025-06-28T14:59:26Z

Roy: /* Basic setup */

==Tutorial Video==

[[Image:MicroSIPthumbnail.jpg|200px|link=https://www.youtube.com/watch?v=2UJm2J0j-2k]]

This is the very basic set up for MicroSIP, there are only a few steps needed to have your device up and running. If you wish to improve your softphone performance or enable some features, refer to the advanced section.

==Basic setup==
1. Download and install '''MicroSIP''' from this [https://www.microsip.org/downloads/current link.]

2. Once downloaded and installed, start MicroSIP and on the welcome screen head onto the arrow pointing down on the top right of the softphone application > Add Account.

[[File:Microsip.png|300px|border]]
<br>
<br>

3. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''SIP Server:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
<br>

Finally, press '''Save''' and you are done configuring MicroSIP.

<b style="color:#b30000;">IMPORTANT:</b><br>
<b style="color:#b30000;">Are you located outside of the Americas? If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]</b><br>

US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.

[[File:Microsip3.png|300px|border]] [[File:Popserver.png|600px|border]]
<br>
<br>

4. Go to the dialpad and test the audio dialing 4443

[[File:Microsip4.png|300px|border]] [[File:Microsip5.png|300px|border]]
<br>
<br>

5. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerIDnumber.png|500px|border]]

==Additional Settings (Optional)==

===TLS SRTP===

In order to enable TLS SRTP (call encryption), you will first need to enable this feature by modifying your main account under Main Menu > Account Settings > Advanced tab and setting '''Encrypted SIP Traffic''' to '''Yes'''

Once done, go into the menu option (arrow pointing down) on the top right of MicroSIP > Edit Account and set the following options:
:- Media Encryption: Mandatory SRTP
:- Transport: TLS

[[File:microSIPTLS.png|thumb|none|600px|Click to enlarge]]

Save and then head once again on the top right of MicroSIP > Settings and once there, modify '''Source Port''' option to 5061 and RTP to 10001 to 20000.

Save these settings and you will now

[[File:microSIP4.png|thumb|none|600px|Click to enlarge]]

===Some additional settings===
By heading into the menu option (arrow pointing down) on the top right of MicroSIP > Settings there are some settings that can be improved in order to avoid any issues while on a call:

:- Enabled Codecs: Only have G711u allowed (or GSM if you have a slow internet connection)
:- Source port: Set it to 5060 (5080 or 42872 for alternate ports) or 5061 (5081 or 42873 for alternate ports) for call encryption
:- RTP Ports: Set the minimum to 10001 and maximum to 20000
:- EC: Make sure this option is enabled. This is an Echo Cancellation option

Otherwise, there are many other options that you can customize like the ring tone you will hear when someone calls among many other options you can customize or enable that you can have a look into. You can also consult [https://www.microsip.org/help/this link] if you have doubts on the options MicroSIP offers.

Microsip

2025-06-28T14:58:42Z

Roy: /* Basic setup */

==Tutorial Video==

[[Image:MicroSIPthumbnail.jpg|200px|link=https://www.youtube.com/watch?v=2UJm2J0j-2k]]

This is the very basic set up for MicroSIP, there are only a few steps needed to have your device up and running. If you wish to improve your softphone performance or enable some features, refer to the advanced section.

==Basic setup==
1. Download and install '''MicroSIP''' from this [https://www.microsip.org/downloads/current link.]

2. Once downloaded and installed, start MicroSIP and on the welcome screen head onto the arrow pointing down on the top right of the softphone application > Add Account.

[[File:Microsip.png|300px|border]]
<br>
<br>

3. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''SIP Server:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
<br>

Finally, press '''Save''' and you are done configuring MicroSIP.

<b style="color:#b30000;">IMPORTANT:</b><br>
<b style="color:#b30000;">Located outside of the Americas? If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]</b><br>

US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.

[[File:Microsip3.png|300px|border]] [[File:Popserver.png|600px|border]]
<br>
<br>

4. Go to the dialpad and test the audio dialing 4443

[[File:Microsip4.png|300px|border]] [[File:Microsip5.png|300px|border]]
<br>
<br>

5. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerIDnumber.png|500px|border]]

==Additional Settings (Optional)==

===TLS SRTP===

In order to enable TLS SRTP (call encryption), you will first need to enable this feature by modifying your main account under Main Menu > Account Settings > Advanced tab and setting '''Encrypted SIP Traffic''' to '''Yes'''

Once done, go into the menu option (arrow pointing down) on the top right of MicroSIP > Edit Account and set the following options:
:- Media Encryption: Mandatory SRTP
:- Transport: TLS

[[File:microSIPTLS.png|thumb|none|600px|Click to enlarge]]

Save and then head once again on the top right of MicroSIP > Settings and once there, modify '''Source Port''' option to 5061 and RTP to 10001 to 20000.

Save these settings and you will now

[[File:microSIP4.png|thumb|none|600px|Click to enlarge]]

===Some additional settings===
By heading into the menu option (arrow pointing down) on the top right of MicroSIP > Settings there are some settings that can be improved in order to avoid any issues while on a call:

:- Enabled Codecs: Only have G711u allowed (or GSM if you have a slow internet connection)
:- Source port: Set it to 5060 (5080 or 42872 for alternate ports) or 5061 (5081 or 42873 for alternate ports) for call encryption
:- RTP Ports: Set the minimum to 10001 and maximum to 20000
:- EC: Make sure this option is enabled. This is an Echo Cancellation option

Otherwise, there are many other options that you can customize like the ring tone you will hear when someone calls among many other options you can customize or enable that you can have a look into. You can also consult [https://www.microsip.org/help/this link] if you have doubts on the options MicroSIP offers.

Microsip

2025-06-28T14:58:00Z

Roy: /* Basic setup */

==Tutorial Video==

[[Image:MicroSIPthumbnail.jpg|200px|link=https://www.youtube.com/watch?v=2UJm2J0j-2k]]

This is the very basic set up for MicroSIP, there are only a few steps needed to have your device up and running. If you wish to improve your softphone performance or enable some features, refer to the advanced section.

==Basic setup==
1. Download and install '''MicroSIP''' from this [https://www.microsip.org/downloads/current link.]

2. Once downloaded and installed, start MicroSIP and on the welcome screen head onto the arrow pointing down on the top right of the softphone application > Add Account.

[[File:Microsip.png|300px|border]]
<br>
<br>

3. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''SIP Server:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
<br>

Finally, press '''Save''' and you are done configuring MicroSIP.

<b style="color:#b30000;">IMPORTANT:</b></br>
<b style="color:#b30000;">Located outside of the Americas? If so, please use any of the international servers [https://wiki.voip.ms/article/Choosing_Server Servers list]</b><br>

US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.

[[File:Microsip3.png|300px|border]] [[File:Popserver.png|600px|border]]
<br>
<br>

4. Go to the dialpad and test the audio dialing 4443

[[File:Microsip4.png|300px|border]] [[File:Microsip5.png|300px|border]]
<br>
<br>

5. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerIDnumber.png|500px|border]]

==Additional Settings (Optional)==

===TLS SRTP===

In order to enable TLS SRTP (call encryption), you will first need to enable this feature by modifying your main account under Main Menu > Account Settings > Advanced tab and setting '''Encrypted SIP Traffic''' to '''Yes'''

Once done, go into the menu option (arrow pointing down) on the top right of MicroSIP > Edit Account and set the following options:
:- Media Encryption: Mandatory SRTP
:- Transport: TLS

[[File:microSIPTLS.png|thumb|none|600px|Click to enlarge]]

Save and then head once again on the top right of MicroSIP > Settings and once there, modify '''Source Port''' option to 5061 and RTP to 10001 to 20000.

Save these settings and you will now

[[File:microSIP4.png|thumb|none|600px|Click to enlarge]]

===Some additional settings===
By heading into the menu option (arrow pointing down) on the top right of MicroSIP > Settings there are some settings that can be improved in order to avoid any issues while on a call:

:- Enabled Codecs: Only have G711u allowed (or GSM if you have a slow internet connection)
:- Source port: Set it to 5060 (5080 or 42872 for alternate ports) or 5061 (5081 or 42873 for alternate ports) for call encryption
:- RTP Ports: Set the minimum to 10001 and maximum to 20000
:- EC: Make sure this option is enabled. This is an Echo Cancellation option

Otherwise, there are many other options that you can customize like the ring tone you will hear when someone calls among many other options you can customize or enable that you can have a look into. You can also consult [https://www.microsip.org/help/this link] if you have doubts on the options MicroSIP offers.

Microsip

2025-06-28T14:54:04Z

Roy: /* Basic setup */

==Tutorial Video==

[[Image:MicroSIPthumbnail.jpg|200px|link=https://www.youtube.com/watch?v=2UJm2J0j-2k]]

This is the very basic set up for MicroSIP, there are only a few steps needed to have your device up and running. If you wish to improve your softphone performance or enable some features, refer to the advanced section.

==Basic setup==
1. Download and install '''MicroSIP''' from this [https://www.microsip.org/downloads/current link.]

2. Once downloaded and installed, start MicroSIP and on the welcome screen head onto the arrow pointing down on the top right of the softphone application > Add Account.

[[File:Microsip.png|300px|border]]
<br>
<br>

3. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''SIP Server:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
<br>

Finally, press '''Save''' and you are done configuring MicroSIP.

<b style="color:#b30000;">Located outside of the Americas? If so, please use any of the international servers -> [https://wiki.voip.ms/article/Choosing_Server SERVER LIST]</b><be>

US/CAN servers might not be reachable from some countries outside the Americas, international servers can be reached from anywhere in the world.

[[File:Microsip3.png|300px|border]] [[File:Popserver.png|600px|border]]
<br>
<br>

4. Go to the dialpad and test the audio dialing 4443

[[File:Microsip4.png|300px|border]] [[File:Microsip5.png|300px|border]]
<br>
<br>

5. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerIDnumber.png|500px|border]]

==Additional Settings (Optional)==

===TLS SRTP===

In order to enable TLS SRTP (call encryption), you will first need to enable this feature by modifying your main account under Main Menu > Account Settings > Advanced tab and setting '''Encrypted SIP Traffic''' to '''Yes'''

Once done, go into the menu option (arrow pointing down) on the top right of MicroSIP > Edit Account and set the following options:
:- Media Encryption: Mandatory SRTP
:- Transport: TLS

[[File:microSIPTLS.png|thumb|none|600px|Click to enlarge]]

Save and then head once again on the top right of MicroSIP > Settings and once there, modify '''Source Port''' option to 5061 and RTP to 10001 to 20000.

Save these settings and you will now

[[File:microSIP4.png|thumb|none|600px|Click to enlarge]]

===Some additional settings===
By heading into the menu option (arrow pointing down) on the top right of MicroSIP > Settings there are some settings that can be improved in order to avoid any issues while on a call:

:- Enabled Codecs: Only have G711u allowed (or GSM if you have a slow internet connection)
:- Source port: Set it to 5060 (5080 or 42872 for alternate ports) or 5061 (5081 or 42873 for alternate ports) for call encryption
:- RTP Ports: Set the minimum to 10001 and maximum to 20000
:- EC: Make sure this option is enabled. This is an Echo Cancellation option

Otherwise, there are many other options that you can customize like the ring tone you will hear when someone calls among many other options you can customize or enable that you can have a look into. You can also consult [https://www.microsip.org/help/this link] if you have doubts on the options MicroSIP offers.

Microsip

2025-06-28T14:48:08Z

Roy: /* Basic setup */

==Tutorial Video==

[[Image:MicroSIPthumbnail.jpg|200px|link=https://www.youtube.com/watch?v=2UJm2J0j-2k]]

This is the very basic set up for MicroSIP, there are only a few steps needed to have your device up and running. If you wish to improve your softphone performance or enable some features, refer to the advanced section.

==Basic setup==
1. Download and install '''MicroSIP''' from this [https://www.microsip.org/downloads/current link.]

2. Once downloaded and installed, start MicroSIP and on the welcome screen head onto the arrow pointing down on the top right of the softphone application > Add Account.

[[File:Microsip.png|300px|border]]
<br>
<br>

3. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''SIP Server:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
<br>

Finally, press '''Save''' and you are done configuring MicroSIP.

<b style="color:#b30000;">Located outside of the Americas? If so, please use any of the international servers -> [https://wiki.voip.ms/article/Choosing_Server SERVER LIST]</b><br>

[[File:Microsip3.png|300px|border]] [[File:Popserver.png|600px|border]]
<br>
<br>

4. Go to the dialpad and test the audio dialing 4443

[[File:Microsip4.png|300px|border]] [[File:Microsip5.png|300px|border]]
<br>
<br>

5. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerIDnumber.png|500px|border]]

==Additional Settings (Optional)==

===TLS SRTP===

In order to enable TLS SRTP (call encryption), you will first need to enable this feature by modifying your main account under Main Menu > Account Settings > Advanced tab and setting '''Encrypted SIP Traffic''' to '''Yes'''

Once done, go into the menu option (arrow pointing down) on the top right of MicroSIP > Edit Account and set the following options:
:- Media Encryption: Mandatory SRTP
:- Transport: TLS

[[File:microSIPTLS.png|thumb|none|600px|Click to enlarge]]

Save and then head once again on the top right of MicroSIP > Settings and once there, modify '''Source Port''' option to 5061 and RTP to 10001 to 20000.

Save these settings and you will now

[[File:microSIP4.png|thumb|none|600px|Click to enlarge]]

===Some additional settings===
By heading into the menu option (arrow pointing down) on the top right of MicroSIP > Settings there are some settings that can be improved in order to avoid any issues while on a call:

:- Enabled Codecs: Only have G711u allowed (or GSM if you have a slow internet connection)
:- Source port: Set it to 5060 (5080 or 42872 for alternate ports) or 5061 (5081 or 42873 for alternate ports) for call encryption
:- RTP Ports: Set the minimum to 10001 and maximum to 20000
:- EC: Make sure this option is enabled. This is an Echo Cancellation option

Otherwise, there are many other options that you can customize like the ring tone you will hear when someone calls among many other options you can customize or enable that you can have a look into. You can also consult [https://www.microsip.org/help/this link] if you have doubts on the options MicroSIP offers.

SessionTalk

2025-03-12T19:16:31Z

Roy:

Session Talk is a free softphone available for Android and iOS users, it's a great free choice for iOS users. Their free version runs in background and works fine for Android and iOS, the free version does not include SMS SIP so you can only make and receive calls.

==Basic set up==
1. Download <b>"Session Talk"</b> from your phone store.

[[File:Sessiontalk01.png|300px|border]]
<br>
<br>

2. Allow access, notifications and permissions to your app.

[[File:sessiontalk02.png|300px|border]]
<br>
<br>

3. Generic SIP, tap the <b>'i'</b> icon

[[File:Sessiontalk03.png|300px|border]]
<br>
<br>

4. Fill in the following
<br>
<br>
'''Account name:''' <b style="color:#b30000;">Type your phone number or write any name, it's just an identifier</b><br>
'''Display name:''' <b style="color:#b30000;">Type your name or company name (NOT guaranteed to be displayed)</b><br>
'''Username:''' <b style="color:#b30000;">Type your account number or subaccount name</b><br>
'''Password:''' <b style="color:#b30000;">Type your password</b><br>
'''Domain:''' <b style="color:#b30000;">Type the server of your number, check it out from your portal, i.e. denver1.voip.ms</b><br>
<br>
<br>

[[File:sessiontalk04.png|300px|border]] [[File:Popserver.png|600px|border]]

<br>
<br>

5. Tap the <b>'Enabled'</b> slider. Your account will be ready.

[[File:Sessiontalk06new.png|300px|border]] [[File:Sessiontalk05.png|300px|border]]

<br>
<br>

6. Go to the dialpad and test the audio dialing 4443

[[File:Sessiontalk07.png|300px|border]] [[File:Sessiontalk08.png|300px|border]]

<br>
<br>

7. Finally, define a caller ID for your username so you can start making outgoing calls:
<br>
<br>
<b>For the main username: </b><b style=color:#b30000>Go to Main Menu -> Account settings -> General tab and fill the "Caller ID number"</b><br>
<b>For a subaccount/extension: </b><b style=color:#b30000>Go to Subaccounts -> Manage subaccount -> Edit subaccount and fill the "Caller ID number"</b><br>

In both cases, make sure to wait 3 minutes after setting the caller ID number and trying to dial out <br>

[[File:CallerID.png|500px|border]]

Softphones

2024-01-12T21:32:57Z

Roy:

A softphone is a software program for making telephone calls over the Internet using a general purpose computer, tablet or smartphone, rather than using dedicated hardware. Often a softphone is designed to behave like a traditional telephone, sometimes appearing as an image of a phone with a display panel and buttons with which the user can interact. A softphone is usually used with a headset connected to the sound card of the PC, or as an installed app on your phone. See also: [[Smartphone]]

Take a peek at VoIP.ms Blog Article : [https://wiki.voip.ms/article/Back_to_Basics,_What_is_a_Softphone_and_How_to_Leverage_It%3F Back to Basics, What is a Softphone and How to Leverage It?]

==Acrobits==

[[File:Acrobits_logo_new.png|300px|left|Acrobits]]

[[File:Acrobitscert.png|180px|right|Acrobits|link=https://www.acrobits.net//?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

'''Product:''' Acrobits

'''Company:''' [https://www.acrobits.net//?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms Acrobits]

'''OS:''' IOS, Android

'''Overview:'''
Acrobits is a mobile software development company with a focus on SIP Clients for mobile devices; their SIP client, Acrobits Softphone, is the leading app of it's type on the iTunes App Store.

[[Acrobits|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==AntiSIP (Mobile)==

[[File:Antisip-logo.png|300px|left|Acrobits]]

'''Product:''' AntiSIP

'''Company:''' [https://www.antisip.com/antisip-company.html AntiSIP]

'''OS:''' Android

'''Overview:'''
AntiSIP is a mobile software SIP, WebRTC, Audio, Video on all platforms!

[[VoIP_by_Antisip|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Bria Mobile==

[[File:Softphone Clients - Smartphones.jpg|350px|left|Bria Mobile|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

[[File:CounterPath ITSP Certified Partner 2017.png|250px|right|CounterPath|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

'''Product:''' Bria Mobile

'''Company:''' [https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms CounterPath]

'''OS:''' Windows, MacOS, Linux (Ubuntu), iOS, Android

'''Overview:'''
Bria 5 is a carrier-grade next generation softphone application that enables you to manage your communications easily and efficiently
– all from your computer desktop. Replacing or complementing your hard phone, the Bria softphone allows you to make VoIP and Video calls over IP, see when your contacts are available, send Instant Messages and transfer files with ease and efficiency.

Bria Mobile for Andoid and IOS is a highly secure, standards-based mobile VoIP softphone that works over both 3G and Wi-Fi networks.

Using the device’s existing contact list, Bria Android Edition facilitates easy and effective communication management with an intuitive interface. Deskphone-class calling functionality includes the ability to swap between two calls, merge calls and perform attended and unattended transfers.

[[Bria|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Bria Solo==

[[File:Briasolologo.jpg|350px|left|Bria Solo|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

[[File:CounterPath ITSP Certified Partner 2017.png|250px|right|CounterPath|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

'''Product:''' Bria Solo

'''Company:''' [https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms CounterPath]

'''OS:''' Windows, MacOS, iOS, Android

'''Overview:'''
Bria Solo provides desktop and mobile softphone applications that facilitate best-in-class calling and robust call control features.

Whether used for inbound or outbound calls, Bria makes it easy to integrate contacts from various sources, streamline communications, and manage calls from one easy-to-use interface.

[[Bria Solo|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Bria Teams==

[[File:Bria-teams-thumb.png|350px|left|Bria Teams|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

[[File:CounterPath ITSP Certified Partner 2017.png|250px|right|CounterPath|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

'''Product:''' [https://www.softphone.com/ Bria Teams]

'''Company:''' [https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms CounterPath]

'''OS:''' Windows, MacOS, iOS, Android

'''Overview:'''
Team Communication made Easy
Bria Teams helps you regain productivity by streamlining all team communications into one application across your devices. With Bria's provisioning, it's easy to get your team talking.

It offers a softphone that helps you gain productivity by streamlining all team communications into one application. It has all the tools you need in one interface, across your devices and can be managed by one simple dashboard.

[[Bria Teams|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Dialer+==

[[File:Dialerplus.png|200px|thumb|left|Dialer+]]

'''Product:''' cd26

'''Company:''' cd26

'''OS:''' IOS

'''Overview:'''
Dialer+ is a SIP-based softphone for iPhone , iPod touch and iPad

Standard Phone Features
* Fast Contact Search – Use phone pad to find contacts by names, initials or any part of the numbers.
• iOS 4.0+ Background Support
• Supports GSM calls when the network is unavailable or slowly
• Multiple Account Support
• Auto switch to best service provider when use multiple account
• Pre-configured VoIP providers list
• Call display
• Speakerphone, Mute and Hold
• Call history
• Contact List and Contact Favorites - leveraging the iPhone Contacts
• Ringtones and contact avatars
• Multiple incoming Call Support - swap between two active calls; merge and split calls
• Audio codecs include G.711,G.722, iLBC ,Speex and GSM, Make an in app purchase to add G.729 for great performance over 3G networks
• Support for RFC 2833 DTMF
• VPN Support
• uPNP Support
• iPhone 4 Retina Display Support

[[Dialer+|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Ekiga==

[[File:Ekigaw0.png|200px|thumb|left|Ekiga Softphone]]

'''Product:''' Ekiga

'''Company:''' Ekiga

'''OS:''' Windows, Linux

'''Overview:'''Ekiga is a software phone and video conferencing application. It allows you to hear and see your friends for free using your computer and Internet. You can also chat with them and see if they are online or not. It works on GNU/Linux and Windows.

More specifically, Ekiga is a VoIP, IP Telephony, and Video Conferencing application that allows you to make audio and video calls to remote users with SIP or H.323 compatible hardware and software.

It supports many audio and video codecs and all modern VoIP features for both SIP and H.323. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting.

[[Ekiga_Softphone|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Express Talk==

[[File:Express0.png|200px|thumb|left|Express Talk]]

'''Product:''' Express Talk

'''Company:''' NCH Software

'''OS:''' Windows, MacOS

'''Overview:''' Express Talk works like a telephone to let you make calls through your computer. Call anyone via the internet who also has a softphone installed and if you sign up with a VoIP gateway service company you call regular telephone numbers as well.

With Express Talk you could potentially call someone using their internet IP (eg. "bob@1.2.3.4") but this is not usually practical. It is much easier to use a friendly address like "bob@myphoneco.com". To have this you need to sign up with a SIP proxy service. This is almost always free to signup for and usually requires nothing more than an email address. See our Recommended SIP Service Providers List for a list of options.

Some of the companies also provide gateway services. This means connecting phone calls to ordinary (non internet or analog PSTN) phone lines. These calls tend to be much less expensive particularly for international calls compared to regular long distance charges since they can offer local call rates.

[[Express_Talk|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==FgVoIP==

[[File:Fgvoip0.jpeg|200px|thumb|left|FgVoIP]]

'''Product:''' FgVoIP

'''Company:''' FG Microtec

'''OS:''' BlackberryOS

'''Overview:''' fg's BlackBerry SIP VoIP Client is a feature rich soft phone application for BlackBerry devices. It can register to any SIP VoIP provider or IP/SIP capable PBX using a WiFi connection in office, campus, home, hotel rooms, public hot-spots etc.

Its much like having a BlackBerry desktop phone in your pocket, providing significantly higher overall productivity while at the same time lowering telephony costs.

Experience the freedom of choosing your own VoIP provider whenever you want, wherever you want. All you need is a WiFi network and a VoIP account.

[[FgVoIP|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Fring==

[[File:Fring00.jpg|left|Fring]]

'''Product:''' Fring

'''Company:''' Fring

'''OS:''' Windows, MacOS, IOS, Linux, Android, Symbian

'''Overview:'''
Fring mobile communication service that gives users internet-rich communication from their mobile phones.

Fring members make FREE video calls, voice calls, live chat to other fringsters and to friends on other social networks.

You can now use your SIP account even from non-SIP enabled phones.

Choose whichever SIP provider you have and in just few clicks, start using this account to make calls to landlines, GSM phones, or to other SIP providers.

Supports Symbian S60, iPhone/ iPod touch, Android, Windows Mobile, MeeGo, Linux, J2MEand proprietary OS.

Fring allows you to easily switch between them, without having to reconfigure your handset through a nightmarish process.

[[Fring|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Grandstream Wave Lite==

[[File:Grandstream Wave.png|200px|Thumb|left|Grandstream Wave]]

'''Product:''' Grandstream Wave lite

'''Company:''' Grandstream

'''OS:''' Android & iOS

'''Overview:'''
Grandstream Wave is a FREE softphone application that allows users to make and receive voice calls through their business or residential SIP accounts on any Android™ device (version 4.0+) from anywhere in the world.

This application supports integration of up to 6 SIP accounts, 6-way voice conferencing, and allows users to monitor their PBX (such as Grandstream's UCM6100 series IP PBX & UCM6510 IP PBX) while utilizing speed dial with up to 24 virtual BLF keys.

Grandstream Wave also supports advanced SIP telephony features including call transfer, LDAP phonebook integration and more.

[[Grandstream Wave|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Jitsi==

[[File:Logo2.png|200px|left|Jitsi]]

'''Product:''' Jitsi

'''Company:''' Jitsi

'''OS:''' Windows, MacOS, Linux

'''Overview:''' Jitsi (formerly SIP Communicator) is an audio/video and chat communicator that supports protocols such as SIP, XMPP/Jabber, AIM/ICQ, Windows Live, Yahoo! and many other useful features.

Jitsi is an Open Source / Free Software, and is available under the terms of the LGPL.

[[Jitsi|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Kiax==

[[File:Kiax3.png|left|200px|Kiax]]

'''Product:''' Kiax

'''Company:''' Kiax

'''OS:''' Windows, MacOS, Linux

'''Overview:'''
Kiax is a softphone (soft phone, VoIP client) with a simple and comfortable user interface for making VoIP calls to Asterisk PBX. It depends on the iaxclient library to use Asterisk's IAX2 protocol for easy call configuration and audio setup.

[[Kiax|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Linphone==

[[File:Linphone_Icon.png|left|200px|Linphone]]

'''Product''': Linphone

'''Company''': Linphone

'''OS:''' Windows, Linux, MacOSX, IPhone, Android.

'''App Storage Consumption:''' 8.09mb (ability to move app to SD card. Data uses an additional ~0.89mb approx.)

'''Overview:''' Linphone is an internet phone or Voice Over IP phone (VoIP). With linphone you can communicate freely with people over the internet, with voice, video, and text instant messaging. Linphone makes use of the SIP protocol, an open standard for internet telephony. You can use Linphone with any SIP VoIP operator.

[[Linphone|See Configuration Details for PC]]
<br>
[[Linphone_iOS|See Configuration Details for iOS]]
<br>
[[Linphone_Android|See Configuration Details for Android]]
<div style="width:100%;overflow:hidden;clear:both">

</div>

==NetDial Sip Phone==

[[File:NetDial.jpg|left|200px|Linphone]]

'''Product''': NetDial Sip Phone

'''Company''': NeoMecca

'''OS:''' iOS, Android.

[[NetDial_Sip_Phone|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Media5-fone==

[[File:Media5Android.jpg|left|Media5Android]]

'''Product:''' Media5-fone

'''Company:''' Media5 Corporation

'''OS:''' Android, iOS

'''Overview:'''
The Media5-fone is a softphone application that runs on the Android and the iOS Operating System. It is a SIP Client (softphone) that enables users to make and receive VoIP calls, enabling them to use their devices as an IP-PBX phone extension in their office or anywhere else in the world.

[[Media5-fone|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==MicroSIP==

[[File:MicroSIPlogo.png|left|200px|MicroSIP]]

'''Product:''' MicroSIP

'''Company:''' MicroSIP

'''OS:''' Windows XP/Vista/7/8/8.1/10, Linux, macOS

'''Overview:'''
MicroSIP is a softphone that works on Windows Operating Systems. It is a SIP Client (softphone) that enables users to make and receive VoIP calls, enabling them to use their devices as an IP-PBX phone extension in their office or anywhere else in the world as well as being really easy to configure.

[[Microsip|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==MizuPhone==

[[File:MizuLogo.png|left|200px|MizuPhone]]

'''Product:''' MizuPhone

'''Company:''' Mizutech

'''OS:''' Windows

'''Overview:'''
Mizu SoftPhone is our award winner professional VoIP client application based on the open standard SIP protocol with an easy to use modern interface. With Mizu SoftPhone you can connect to any SIP server on the public internet or on your local area network.

Multiple accounts and multiple SIP server registrations combined with a powerful dial plan can minimize your telecom bills while using the greatest features from the VoIP industry.

Features include built-in encryption, IM, presence, HD Video, history with voice records, skype like voice quality using ultra-wideband codecs and much more.

A free edition is also available based on the same engine as our corporate sip softphone but it has some features disabled (like G.729 and wideband codecs, multiple accounts and file transfer over SIP).

[[MizuPhone_Classic_Edition|See Configuration Details for MizuPhone Classic Edition]]
<br>
[[MizuPhone_Modern_Edition|See Configuration Details for MizuPhone Modern Edition]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==MizuDroid==

[[File:MizuDroid_logo.png|left|200px]]

'''Product:''' MizuDroid

'''Company:''' Mizutech

'''OS:''' Android

'''Overview:'''
MizuDroid is an unlocked VoIP softphone for Android mobile phones and tablets based on open standards, compatible with all VoIP providers, software and devices using the SIP protocol.

[[MizuDroid|See Configuration Details for MizuDroid]]

==NinjaLite==

[[File:Ninja6.png|left|200px|NinjaLite]]

'''Product:''' NinjaLite

'''Company:''' Global IP Telecommunications

'''OS:''' Windows

'''Overview:'''
Ninja Lite offers Audio- and video telephony for everybody, Ninja features individual skins and ringtones!, Ninja is natively Vista 32bit /64 bit and Windows7 compatible.

[[NinjaLite|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==PhonerLite==

[[File:PhonerLite.png|left|300px|PhonerLite]]

'''Product:''' PhonerLite

'''Company:''' PhonerLite

'''OS:''' Windows

'''Overview:'''
PhonerLite is a clearly arranged application for Windows. PhonerLite enables your PC to use it for internet telephony (VoIP , Voice over IP ). Pre-conditions are a full-duplex sound card , a microphone and speakers (alternativelya headset), an internet connection and a registration at a provider supporting the protocol SIP .PhonerLite supports several SIP profiles, each configurable independently. In thesame way the integrated phone book and call log are easy to use.

[[PhonerLite|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==PortGo==

[[File:Portgo3.png|left|200px|PortGo]]

'''Product:''' PortGo

'''Company:''' PortSIP Solutions, Inc

'''OS:''' Windows (desktop and mobile)

'''Overview:'''
PortGo is the newest SIP softphone from PortSIP, it's built base on PortSIP VoIP SDK, allowing users to enjoy multimedia communications in a dynamic way.

Featuring an intuitive interface, PortGo is expanding the softphone experience by making it even easier to make VoIP and Video over IP calls, see when your contacts are available and send Instant Messages. PortGo features an IM interface which focuses on your contacts and friends.

[[PortGo|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==QuteCom==

[[File:Qutecom3.png|left|200px|QuteCom]]

'''Product:''' QuteCom

'''Company:''' QuteCom

'''OS:''' Windows,MacOS,Linux

'''Overview:'''
QuteCom is a community of enthusiasts and developers, creating free software products related to communication over IP. The flagship product of the QuteCom project is a softphone which allows you to make free PC to PC video and voice calls, and to integrate all your IM contacts in one place.

[[QuteCom|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==SessionTalk==

[[File:SessionTalk logo.png|left|200px|SessionTalk]]

'''Product:''' SessionTalk

'''Company:''' SessionTalk

'''OS:''' Android, iOS

'''Overview:'''
SessionTalk Mobile is a feature rich mobile SIP Client for iOS and Android handsets Voice calls and SMS Messaging* support.

[[SessionTalk|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==SIP Droid==

[[File:Sipdroid_00.png|200px|thumb|left|SIP Droid]]

'''Product:''' SIP Droid

'''Company:''' SIP Droid

'''OS:''' Android

'''App Storage Consumption:''' 1.85mb (ability to move app to SD card. Data uses an additional ~4kb approx.)

'''Overview:''' SIPDroid is a java based, open source SIP client that has recently been developed for use with mobile devices based on Google’s Android platform.

[[SIP_Droid|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==SJPhone==

[[File:Sjphone0.png|200px|thumb|left|SJPhone]]

'''Product:''' SJPhone

'''Company:''' SJ Labs, Inc.

'''OS:''' Windows,Windows Mobile

'''Overview:'''
SJphone is a VOIP softphone that allows you to speak with any other softphone, any stand-alone IP-phone, or using ITSP with any traditional wired or mobile phone.

It supports both SIP and H.323 standards and is fully inter-operable with most major VOIP vendors and ITSP.

[[SJPhone|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Softphone.Pro==

[[File:SoftphoneProStats.png|350px|thumb|left|Softphone.Pro]]

'''Product:''' Softphone.Pro

'''Company:''' Vedisoft

'''OS:''' Windows, macOS

'''Overview:'''
Softphone.Prop is a great solution for call center agents, sales pros and support teams.

'''Main features:'''

• Easy integration with CRM
• 32 SIP accounts supported
• Call recording and screen capture
• Click-to-call and auto and easy 2-click transfer
• Voicemail Drop and Prerecorded Greeting on Answer
• ACW and BLF status control
• Professional headsets support
• Listen, whisper, barge
• Customizable interface
• Hotkeys

[[Softphone.Pro|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Taki==

[[File:blackberry_z30_taki_oncall.png|200px|thumb|left|Taki]]

'''Product:''' Taki

'''Company:''' Taki

'''OS:''' BlackBerry 10, BlackBerry PlayBook

'''Project site:''' http://taki.sourceforge.net/

'''App in the AppWorld:''' http://appworld.blackberry.com/webstore/content/130295

'''Overview:''' Taki is a native SIP softphone for BlackBerry® PlayBook™ and
BlackBerry® 10 platforms.

'''Main Features:'''
- Multiple SIP accounts support
- Multiple simultaneous calls
- Call recording
- Conference calls
- Advanced call control: Transfer, Hold, Mute, Reject, Redial, switch
between multiple active calls
- Speaker phone support
- Address book. Integration with local contacts on BlackBerry 10 phones
- Comprehensive SIP settings (port binding, outbound proxy, registrar,
codecs priority, NAT traversal, STUN, Presence, and more)
- Transports: UDP/TCP
- Audio codecs: G.711a/u, GSM, iLBC, G.722 (HD), Speex (NB, WB, UWB)
- Built for BlackBerry

[[Taki|See Configuration Details]]

<div style="width:100%;overflow:hidden;clear:both"></div>

==Telephone==

[[File:telephone-user-interface.png|200px|thumb|left|Telephone]]

'''Product:''' Telephone

'''Company:''' 64 Characters

'''OS:''' OS X 10.9 or later

'''Project site:''' http://www.64characters.com/telephone/

'''Mac App Store:''' https://itunes.apple.com/us/app/telephone/id406825478

'''Overview:''' Telephone is a fully-featured SIP client with a minimalist user interface.

<br>

'''Main Features:'''

* Multiple SIP accounts
* Multiple simultaneous calls w/conferencing
* Call control: Transfer, Hold, Mute, Reject, Redial, Call Waiting, multiple active calls
* Speaker phone/headset support (via Mac sound device)
* Integration with Contacts app, dial by name, autocomplete, click to dial
* Send DTMF tones
* Languages: English, German, Russian

[[Telephone|See Configuration Details]]

<div style="width:100%;overflow:hidden;clear:both"></div>

==X-Lite==

[[File:Xlite_00.png|200px|thumb|left|X-Lite]]

'''Product:''' X-Lite

'''Company:''' CounterPath

'''OS:''' Windows, MacOS, Linux

'''Overview:''' CounterPath's X-Lite helps you seamlessly transition from a traditional phone environment into the world of Voice over IP.

The latest release of X-Lite provides a completely redesigned interface that allows for a contact-centric or dialpad-centric user experience, or a combination of the two. It also provides you with some of the most popular features of our fully loaded Bria and eyeBeam softphones so you can take them for a test drive before you make your purchase.

Having a simple voice conversation, you’ll soon see why having a softphone on your desktop or laptop is the ultimate communications experience.

[[X-Lite|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==ZoiPer==

[[File:Zoiper0.png|300px|thumb|left|Zoiper Classic]]
[[File:zlogo.jpg|300px|thumb|right|https://www.zoiper.com/en]]

'''Product:''' ZoiPer

'''Company:''' ZoiPer

'''OS:''' Windows, Mac OS, Android, iOS

'''Overview:''' IAX & SIP multilanguage softphone is a VoIP soft client, meant to work with any IP-based communications systems and infrastructure.

Zoiper is available for Windows, Mac OS X and Linux and supports the following languages: English, German, Spanish, French, Dutch, Portuguese, Russian, Chinese, Japanese, Italian, Polish, Magyar.

*[[Zoiper_Classic|See Configuration Details for Zoiper Classic for PC/MAC]]<br />
*[[Zoiper_5| See Configuration Details for ZoiPer 5 for PC/MAC]]<br />
*[[Zoiper_5_Pro| See Configuration Details for ZoiPer 5 PRO for PC`MAC]]
*[[ZoIPer_for_Android|See Configuration Details for android]]<br/>
*[[ZoIPer_for_iOS|See Configuration Details for iOS]]<br/>
<div style="width:100%;overflow:hidden;clear:both"></div>
[[category:softphones]]

==ZoiPer Communicator==

[[File:Zoiperco1.png|200px|thumb|left|Zoiper Communicator]]
[[File:zlogo.jpg|300px|thumb|right|https://www.zoiper.com/en]]

'''Product:''' Zoiper Communicator

'''Company:''' Zoiper

'''OS:''' Windows, MacOS, Linux, Solaris

'''Overview:''' Zoiper Communicator IAX & SIP softphone is a converged Internet communication tool combining high-quality voice and video calls, fax, instant messaging and presence through a contact-centric intuitive interface.

[[Zoiper_Communicator|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

Softphones

2024-01-12T21:32:07Z

Roy:

A softphone is a software program for making telephone calls over the Internet using a general purpose computer, tablet or smartphone, rather than using dedicated hardware. Often a softphone is designed to behave like a traditional telephone, sometimes appearing as an image of a phone with a display panel and buttons with which the user can interact. A softphone is usually used with a headset connected to the sound card of the PC, or as an installed app on your phone. See also: [[Smartphone]]

Take a peek at VoIP.ms Blog Article : [https://wiki.voip.ms/article/Back_to_Basics,_What_is_a_Softphone_and_How_to_Leverage_It%3F Back to Basics, What is a Softphone and How to Leverage It?]

==Acrobits==

[[File:Acrobits_logo_new.png|300px|left|Acrobits]]

[[File:Acrobitscert.png|180px|right|Acrobits|link=https://www.acrobits.net//?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

'''Product:''' Acrobits

'''Company:''' [https://www.acrobits.net//?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms Acrobits]

'''OS:''' IOS, Android

'''Overview:'''
Acrobits is a mobile software development company with a focus on SIP Clients for mobile devices; their SIP client, Acrobits Softphone, is the leading app of it's type on the iTunes App Store.

[[Acrobits|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==AntiSIP (Mobile)==

[[File:Antisip-logo.png|300px|left|Acrobits]]

'''Product:''' AntiSIP

'''Company:''' [https://www.antisip.com/antisip-company.html AntiSIP]

'''OS:''' Android

'''Overview:'''
AntiSIP is a mobile software SIP, WebRTC, Audio, Video on all platforms!

[[VoIP_by_Antisip|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Bria Mobile==

[[File:Softphone Clients - Smartphones.jpg|350px|left|Bria Mobile|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

[[File:CounterPath ITSP Certified Partner 2017.png|250px|right|CounterPath|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

'''Product:''' Bria Mobile

'''Company:''' [https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms CounterPath]

'''OS:''' Windows, MacOS, Linux (Ubuntu), iOS, Android

'''Overview:'''
Bria 5 is a carrier-grade next generation softphone application that enables you to manage your communications easily and efficiently
– all from your computer desktop. Replacing or complementing your hard phone, the Bria softphone allows you to make VoIP and Video calls over IP, see when your contacts are available, send Instant Messages and transfer files with ease and efficiency.

Bria Mobile for Andoid and IOS is a highly secure, standards-based mobile VoIP softphone that works over both 3G and Wi-Fi networks.

Using the device’s existing contact list, Bria Android Edition facilitates easy and effective communication management with an intuitive interface. Deskphone-class calling functionality includes the ability to swap between two calls, merge calls and perform attended and unattended transfers.

[[Bria|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Bria Solo==

[[File:Briasolologo.jpg|350px|left|Bria Solo|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

[[File:CounterPath ITSP Certified Partner 2017.png|250px|right|CounterPath|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

'''Product:''' Bria Solo

'''Company:''' [https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms CounterPath]

'''OS:''' Windows, MacOS, iOS, Android

'''Overview:'''
Bria Solo provides desktop and mobile softphone applications that facilitate best-in-class calling and robust call control features.

Whether used for inbound or outbound calls, Bria makes it easy to integrate contacts from various sources, streamline communications, and manage calls from one easy-to-use interface.

[[Bria Solo|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Bria Teams==

[[File:Bria-teams-thumb.png|350px|left|Bria Teams|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

[[File:CounterPath ITSP Certified Partner 2017.png|250px|right|CounterPath|link=https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms]]

'''Product:''' [https://www.softphone.com/ Bria Teams]

'''Company:''' [https://www.counterpath.com/?utm_campaign=itsp-partners&utm_medium=cp-certified-logo&utm_source=voipms CounterPath]

'''OS:''' Windows, MacOS, iOS, Android

'''Overview:'''
Team Communication made Easy
Bria Teams helps you regain productivity by streamlining all team communications into one application across your devices. With Bria's provisioning, it's easy to get your team talking.

It offers a softphone that helps you gain productivity by streamlining all team communications into one application. It has all the tools you need in one interface, across your devices and can be managed by one simple dashboard.

[[Bria Teams|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Dialer+==

[[File:Dialerplus.png|200px|thumb|left|Dialer+]]

'''Product:''' cd26

'''Company:''' cd26

'''OS:''' IOS

'''Overview:'''
Dialer+ is a SIP-based softphone for iPhone , iPod touch and iPad

Standard Phone Features
* Fast Contact Search – Use phone pad to find contacts by names, initials or any part of the numbers.
• iOS 4.0+ Background Support
• Supports GSM calls when the network is unavailable or slowly
• Multiple Account Support
• Auto switch to best service provider when use multiple account
• Pre-configured VoIP providers list
• Call display
• Speakerphone, Mute and Hold
• Call history
• Contact List and Contact Favorites - leveraging the iPhone Contacts
• Ringtones and contact avatars
• Multiple incoming Call Support - swap between two active calls; merge and split calls
• Audio codecs include G.711,G.722, iLBC ,Speex and GSM, Make an in app purchase to add G.729 for great performance over 3G networks
• Support for RFC 2833 DTMF
• VPN Support
• uPNP Support
• iPhone 4 Retina Display Support

[[Dialer+|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Ekiga==

[[File:Ekigaw0.png|200px|thumb|left|Ekiga Softphone]]

'''Product:''' Ekiga

'''Company:''' Ekiga

'''OS:''' Windows, Linux

'''Overview:'''Ekiga is a software phone and video conferencing application. It allows you to hear and see your friends for free using your computer and Internet. You can also chat with them and see if they are online or not. It works on GNU/Linux and Windows.

More specifically, Ekiga is a VoIP, IP Telephony, and Video Conferencing application that allows you to make audio and video calls to remote users with SIP or H.323 compatible hardware and software.

It supports many audio and video codecs and all modern VoIP features for both SIP and H.323. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting.

[[Ekiga_Softphone|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Express Talk==

[[File:Express0.png|200px|thumb|left|Express Talk]]

'''Product:''' Express Talk

'''Company:''' NCH Software

'''OS:''' Windows, MacOS

'''Overview:''' Express Talk works like a telephone to let you make calls through your computer. Call anyone via the internet who also has a softphone installed and if you sign up with a VoIP gateway service company you call regular telephone numbers as well.

With Express Talk you could potentially call someone using their internet IP (eg. "bob@1.2.3.4") but this is not usually practical. It is much easier to use a friendly address like "bob@myphoneco.com". To have this you need to sign up with a SIP proxy service. This is almost always free to signup for and usually requires nothing more than an email address. See our Recommended SIP Service Providers List for a list of options.

Some of the companies also provide gateway services. This means connecting phone calls to ordinary (non internet or analog PSTN) phone lines. These calls tend to be much less expensive particularly for international calls compared to regular long distance charges since they can offer local call rates.

[[Express_Talk|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==FgVoIP==

[[File:Fgvoip0.jpeg|200px|thumb|left|FgVoIP]]

'''Product:''' FgVoIP

'''Company:''' FG Microtec

'''OS:''' BlackberryOS

'''Overview:''' fg's BlackBerry SIP VoIP Client is a feature rich soft phone application for BlackBerry devices. It can register to any SIP VoIP provider or IP/SIP capable PBX using a WiFi connection in office, campus, home, hotel rooms, public hot-spots etc.

Its much like having a BlackBerry desktop phone in your pocket, providing significantly higher overall productivity while at the same time lowering telephony costs.

Experience the freedom of choosing your own VoIP provider whenever you want, wherever you want. All you need is a WiFi network and a VoIP account.

[[FgVoIP|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Fring==

[[File:Fring00.jpg|left|Fring]]

'''Product:''' Fring

'''Company:''' Fring

'''OS:''' Windows, MacOS, IOS, Linux, Android, Symbian

'''Overview:'''
Fring mobile communication service that gives users internet-rich communication from their mobile phones.

Fring members make FREE video calls, voice calls, live chat to other fringsters and to friends on other social networks.

You can now use your SIP account even from non-SIP enabled phones.

Choose whichever SIP provider you have and in just few clicks, start using this account to make calls to landlines, GSM phones, or to other SIP providers.

Supports Symbian S60, iPhone/ iPod touch, Android, Windows Mobile, MeeGo, Linux, J2MEand proprietary OS.

Fring allows you to easily switch between them, without having to reconfigure your handset through a nightmarish process.

[[Fring|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Grandstream Wave lite==

[[File:Grandstream Wave.png|200px|Thumb|left|Grandstream Wave]]

'''Product:''' Grandstream Wave lite

'''Company:''' Grandstream

'''OS:''' Android & iOS

'''Overview:'''
Grandstream Wave is a FREE softphone application that allows users to make and receive voice calls through their business or residential SIP accounts on any Android™ device (version 4.0+) from anywhere in the world.

This application supports integration of up to 6 SIP accounts, 6-way voice conferencing, and allows users to monitor their PBX (such as Grandstream's UCM6100 series IP PBX & UCM6510 IP PBX) while utilizing speed dial with up to 24 virtual BLF keys.

Grandstream Wave also supports advanced SIP telephony features including call transfer, LDAP phonebook integration and more.

[[Grandstream Wave|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Jitsi==

[[File:Logo2.png|200px|left|Jitsi]]

'''Product:''' Jitsi

'''Company:''' Jitsi

'''OS:''' Windows, MacOS, Linux

'''Overview:''' Jitsi (formerly SIP Communicator) is an audio/video and chat communicator that supports protocols such as SIP, XMPP/Jabber, AIM/ICQ, Windows Live, Yahoo! and many other useful features.

Jitsi is an Open Source / Free Software, and is available under the terms of the LGPL.

[[Jitsi|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Kiax==

[[File:Kiax3.png|left|200px|Kiax]]

'''Product:''' Kiax

'''Company:''' Kiax

'''OS:''' Windows, MacOS, Linux

'''Overview:'''
Kiax is a softphone (soft phone, VoIP client) with a simple and comfortable user interface for making VoIP calls to Asterisk PBX. It depends on the iaxclient library to use Asterisk's IAX2 protocol for easy call configuration and audio setup.

[[Kiax|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Linphone==

[[File:Linphone_Icon.png|left|200px|Linphone]]

'''Product''': Linphone

'''Company''': Linphone

'''OS:''' Windows, Linux, MacOSX, IPhone, Android.

'''App Storage Consumption:''' 8.09mb (ability to move app to SD card. Data uses an additional ~0.89mb approx.)

'''Overview:''' Linphone is an internet phone or Voice Over IP phone (VoIP). With linphone you can communicate freely with people over the internet, with voice, video, and text instant messaging. Linphone makes use of the SIP protocol, an open standard for internet telephony. You can use Linphone with any SIP VoIP operator.

[[Linphone|See Configuration Details for PC]]
<br>
[[Linphone_iOS|See Configuration Details for iOS]]
<br>
[[Linphone_Android|See Configuration Details for Android]]
<div style="width:100%;overflow:hidden;clear:both">

</div>

==NetDial Sip Phone==

[[File:NetDial.jpg|left|200px|Linphone]]

'''Product''': NetDial Sip Phone

'''Company''': NeoMecca

'''OS:''' iOS, Android.

[[NetDial_Sip_Phone|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Media5-fone==

[[File:Media5Android.jpg|left|Media5Android]]

'''Product:''' Media5-fone

'''Company:''' Media5 Corporation

'''OS:''' Android, iOS

'''Overview:'''
The Media5-fone is a softphone application that runs on the Android and the iOS Operating System. It is a SIP Client (softphone) that enables users to make and receive VoIP calls, enabling them to use their devices as an IP-PBX phone extension in their office or anywhere else in the world.

[[Media5-fone|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==MicroSIP==

[[File:MicroSIPlogo.png|left|200px|MicroSIP]]

'''Product:''' MicroSIP

'''Company:''' MicroSIP

'''OS:''' Windows XP/Vista/7/8/8.1/10, Linux, macOS

'''Overview:'''
MicroSIP is a softphone that works on Windows Operating Systems. It is a SIP Client (softphone) that enables users to make and receive VoIP calls, enabling them to use their devices as an IP-PBX phone extension in their office or anywhere else in the world as well as being really easy to configure.

[[Microsip|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==MizuPhone==

[[File:MizuLogo.png|left|200px|MizuPhone]]

'''Product:''' MizuPhone

'''Company:''' Mizutech

'''OS:''' Windows

'''Overview:'''
Mizu SoftPhone is our award winner professional VoIP client application based on the open standard SIP protocol with an easy to use modern interface. With Mizu SoftPhone you can connect to any SIP server on the public internet or on your local area network.

Multiple accounts and multiple SIP server registrations combined with a powerful dial plan can minimize your telecom bills while using the greatest features from the VoIP industry.

Features include built-in encryption, IM, presence, HD Video, history with voice records, skype like voice quality using ultra-wideband codecs and much more.

A free edition is also available based on the same engine as our corporate sip softphone but it has some features disabled (like G.729 and wideband codecs, multiple accounts and file transfer over SIP).

[[MizuPhone_Classic_Edition|See Configuration Details for MizuPhone Classic Edition]]
<br>
[[MizuPhone_Modern_Edition|See Configuration Details for MizuPhone Modern Edition]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==MizuDroid==

[[File:MizuDroid_logo.png|left|200px]]

'''Product:''' MizuDroid

'''Company:''' Mizutech

'''OS:''' Android

'''Overview:'''
MizuDroid is an unlocked VoIP softphone for Android mobile phones and tablets based on open standards, compatible with all VoIP providers, software and devices using the SIP protocol.

[[MizuDroid|See Configuration Details for MizuDroid]]

==NinjaLite==

[[File:Ninja6.png|left|200px|NinjaLite]]

'''Product:''' NinjaLite

'''Company:''' Global IP Telecommunications

'''OS:''' Windows

'''Overview:'''
Ninja Lite offers Audio- and video telephony for everybody, Ninja features individual skins and ringtones!, Ninja is natively Vista 32bit /64 bit and Windows7 compatible.

[[NinjaLite|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==PhonerLite==

[[File:PhonerLite.png|left|300px|PhonerLite]]

'''Product:''' PhonerLite

'''Company:''' PhonerLite

'''OS:''' Windows

'''Overview:'''
PhonerLite is a clearly arranged application for Windows. PhonerLite enables your PC to use it for internet telephony (VoIP , Voice over IP ). Pre-conditions are a full-duplex sound card , a microphone and speakers (alternativelya headset), an internet connection and a registration at a provider supporting the protocol SIP .PhonerLite supports several SIP profiles, each configurable independently. In thesame way the integrated phone book and call log are easy to use.

[[PhonerLite|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==PortGo==

[[File:Portgo3.png|left|200px|PortGo]]

'''Product:''' PortGo

'''Company:''' PortSIP Solutions, Inc

'''OS:''' Windows (desktop and mobile)

'''Overview:'''
PortGo is the newest SIP softphone from PortSIP, it's built base on PortSIP VoIP SDK, allowing users to enjoy multimedia communications in a dynamic way.

Featuring an intuitive interface, PortGo is expanding the softphone experience by making it even easier to make VoIP and Video over IP calls, see when your contacts are available and send Instant Messages. PortGo features an IM interface which focuses on your contacts and friends.

[[PortGo|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==QuteCom==

[[File:Qutecom3.png|left|200px|QuteCom]]

'''Product:''' QuteCom

'''Company:''' QuteCom

'''OS:''' Windows,MacOS,Linux

'''Overview:'''
QuteCom is a community of enthusiasts and developers, creating free software products related to communication over IP. The flagship product of the QuteCom project is a softphone which allows you to make free PC to PC video and voice calls, and to integrate all your IM contacts in one place.

[[QuteCom|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==SessionTalk==

[[File:SessionTalk logo.png|left|200px|SessionTalk]]

'''Product:''' SessionTalk

'''Company:''' SessionTalk

'''OS:''' Android, iOS

'''Overview:'''
SessionTalk Mobile is a feature rich mobile SIP Client for iOS and Android handsets Voice calls and SMS Messaging* support.

[[SessionTalk|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==SIP Droid==

[[File:Sipdroid_00.png|200px|thumb|left|SIP Droid]]

'''Product:''' SIP Droid

'''Company:''' SIP Droid

'''OS:''' Android

'''App Storage Consumption:''' 1.85mb (ability to move app to SD card. Data uses an additional ~4kb approx.)

'''Overview:''' SIPDroid is a java based, open source SIP client that has recently been developed for use with mobile devices based on Google’s Android platform.

[[SIP_Droid|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==SJPhone==

[[File:Sjphone0.png|200px|thumb|left|SJPhone]]

'''Product:''' SJPhone

'''Company:''' SJ Labs, Inc.

'''OS:''' Windows,Windows Mobile

'''Overview:'''
SJphone is a VOIP softphone that allows you to speak with any other softphone, any stand-alone IP-phone, or using ITSP with any traditional wired or mobile phone.

It supports both SIP and H.323 standards and is fully inter-operable with most major VOIP vendors and ITSP.

[[SJPhone|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Softphone.Pro==

[[File:SoftphoneProStats.png|350px|thumb|left|Softphone.Pro]]

'''Product:''' Softphone.Pro

'''Company:''' Vedisoft

'''OS:''' Windows, macOS

'''Overview:'''
Softphone.Prop is a great solution for call center agents, sales pros and support teams.

'''Main features:'''

• Easy integration with CRM
• 32 SIP accounts supported
• Call recording and screen capture
• Click-to-call and auto and easy 2-click transfer
• Voicemail Drop and Prerecorded Greeting on Answer
• ACW and BLF status control
• Professional headsets support
• Listen, whisper, barge
• Customizable interface
• Hotkeys

[[Softphone.Pro|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Taki==

[[File:blackberry_z30_taki_oncall.png|200px|thumb|left|Taki]]

'''Product:''' Taki

'''Company:''' Taki

'''OS:''' BlackBerry 10, BlackBerry PlayBook

'''Project site:''' http://taki.sourceforge.net/

'''App in the AppWorld:''' http://appworld.blackberry.com/webstore/content/130295

'''Overview:''' Taki is a native SIP softphone for BlackBerry® PlayBook™ and
BlackBerry® 10 platforms.

'''Main Features:'''
- Multiple SIP accounts support
- Multiple simultaneous calls
- Call recording
- Conference calls
- Advanced call control: Transfer, Hold, Mute, Reject, Redial, switch
between multiple active calls
- Speaker phone support
- Address book. Integration with local contacts on BlackBerry 10 phones
- Comprehensive SIP settings (port binding, outbound proxy, registrar,
codecs priority, NAT traversal, STUN, Presence, and more)
- Transports: UDP/TCP
- Audio codecs: G.711a/u, GSM, iLBC, G.722 (HD), Speex (NB, WB, UWB)
- Built for BlackBerry

[[Taki|See Configuration Details]]

<div style="width:100%;overflow:hidden;clear:both"></div>

==Telephone==

[[File:telephone-user-interface.png|200px|thumb|left|Telephone]]

'''Product:''' Telephone

'''Company:''' 64 Characters

'''OS:''' OS X 10.9 or later

'''Project site:''' http://www.64characters.com/telephone/

'''Mac App Store:''' https://itunes.apple.com/us/app/telephone/id406825478

'''Overview:''' Telephone is a fully-featured SIP client with a minimalist user interface.

<br>

'''Main Features:'''

* Multiple SIP accounts
* Multiple simultaneous calls w/conferencing
* Call control: Transfer, Hold, Mute, Reject, Redial, Call Waiting, multiple active calls
* Speaker phone/headset support (via Mac sound device)
* Integration with Contacts app, dial by name, autocomplete, click to dial
* Send DTMF tones
* Languages: English, German, Russian

[[Telephone|See Configuration Details]]

<div style="width:100%;overflow:hidden;clear:both"></div>

==X-Lite==

[[File:Xlite_00.png|200px|thumb|left|X-Lite]]

'''Product:''' X-Lite

'''Company:''' CounterPath

'''OS:''' Windows, MacOS, Linux

'''Overview:''' CounterPath's X-Lite helps you seamlessly transition from a traditional phone environment into the world of Voice over IP.

The latest release of X-Lite provides a completely redesigned interface that allows for a contact-centric or dialpad-centric user experience, or a combination of the two. It also provides you with some of the most popular features of our fully loaded Bria and eyeBeam softphones so you can take them for a test drive before you make your purchase.

Having a simple voice conversation, you’ll soon see why having a softphone on your desktop or laptop is the ultimate communications experience.

[[X-Lite|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==ZoiPer==

[[File:Zoiper0.png|300px|thumb|left|Zoiper Classic]]
[[File:zlogo.jpg|300px|thumb|right|https://www.zoiper.com/en]]

'''Product:''' ZoiPer

'''Company:''' ZoiPer

'''OS:''' Windows, Mac OS, Android, iOS

'''Overview:''' IAX & SIP multilanguage softphone is a VoIP soft client, meant to work with any IP-based communications systems and infrastructure.

Zoiper is available for Windows, Mac OS X and Linux and supports the following languages: English, German, Spanish, French, Dutch, Portuguese, Russian, Chinese, Japanese, Italian, Polish, Magyar.

*[[Zoiper_Classic|See Configuration Details for Zoiper Classic for PC/MAC]]<br />
*[[Zoiper_5| See Configuration Details for ZoiPer 5 for PC/MAC]]<br />
*[[Zoiper_5_Pro| See Configuration Details for ZoiPer 5 PRO for PC`MAC]]
*[[ZoIPer_for_Android|See Configuration Details for android]]<br/>
*[[ZoIPer_for_iOS|See Configuration Details for iOS]]<br/>
<div style="width:100%;overflow:hidden;clear:both"></div>
[[category:softphones]]

==ZoiPer Communicator==

[[File:Zoiperco1.png|200px|thumb|left|Zoiper Communicator]]
[[File:zlogo.jpg|300px|thumb|right|https://www.zoiper.com/en]]

'''Product:''' Zoiper Communicator

'''Company:''' Zoiper

'''OS:''' Windows, MacOS, Linux, Solaris

'''Overview:''' Zoiper Communicator IAX & SIP softphone is a converged Internet communication tool combining high-quality voice and video calls, fax, instant messaging and presence through a contact-centric intuitive interface.

[[Zoiper_Communicator|See Configuration Details]]
<div style="width:100%;overflow:hidden;clear:both"></div>

Grandstream Wave

2024-01-12T21:30:52Z

Roy:

[[File:Grandstream_Wave_Logo_App.png|200px|right|none|GrandStream Wave|200px]]

<b style=color:#b30000>WARNING: This softphone is no longer available for Play and App Store, this guide can be used for existing and installed softphones but not for new installations or set up</b>

Grandstream Wave is a FREE softphone application that allows users to make and receive voice calls through their business or residential SIP accounts on any Android™ device (version 4.0+) from anywhere in the world.

This application supports integration of up to 6 SIP accounts, 6-way voice conferencing, and allows users to monitor their PBX (such as Grandstream's UCM6100 series IP PBX & UCM6510 IP PBX) while utilizing speed dial with up to 24 virtual BLF keys.

Grandstream Wave also supports advanced SIP telephony features including call transfer, LDAP phonebook integration and more.

== Download the official Grandstream Wave apps ==

The app is available here for Andoid and iOS mobile devices,
:* [https://play.google.com/store/apps/details?id=com.grandstream.wave Google Play Store for Android]
:* [https://apps.apple.com/us/app/grandstream-wave-lite/id1029274043 Apple Store for iPhone and iPad]

== Video tutorial ==

[[Image:GSWthumbnail.jpg|200px|link=https://www.youtube.com/watch?v=pJpO6FtbmfE]]

== Configuration ==
The configuration process remains the same whether you are using Android or an iPhone / iPad.

* Start the Grandstream Wave App
* At the bottom of the screen, tap on '''Settings'''
: [[File:Grandstream Wave Settings.jpg|200px]]

* Select '''Account Settings''' then tap the ''+'' sign at the top right of the screen to '''Add a New Account'''
* From the '''Add New Account''' section, select '''SIP account'''.
: [[File:Grandstream Wave NewAccount.png|250px]]

* Fill in the Settings for your account
** '''Account Name''' Voip.ms (Any name to identify your account)
** '''SIP Server''' One of VoIP.ms multiple [[Choosing Server#Choosing_a_Server | servers]], you can choose the one closest to your location
** '''SIP User ID''' Your Main account or sub account username (six digit number) E.G 123456 / 123456_XX (the underscore has to be used for sub-accounts)
** '''SIP Authentication ID''' same as "SIP User ID"
** '''Password''': ''The password you set for the account / sub account''
** '''Voicemail ID''' '''*97'''
** '''Display Name''': ''(This will be your Outgoing Caller ID Name. It will be used when calling Canadian numbers. '''Please read the note below''')''

If you would like to set an Outbound Caller ID Name with your number when you call a Canadian number, since the major canadian provider's will not using the CNAM/LIBD database, you will need to pass your Outbound caller ID Name direcly in the '''Display Name''' field.

'''IMPORTANT''':
- We suggest entering your outbound Caller ID Name must be in '''capital letters'''. This will appears more clearly/visible on some devices.
- You must NOT use any special characters, they will not be displayed.
- Some of regular Canadian providers will not show more than 15 characters. We suggest shrinking or adapt your caller ID.
- Spaces are allowed in a caller id name.

: [[File:Grandstream_Wave_SIP_Settings_config.png|200px]]
'''IMPORTANT''' for Display Name section!:
- We suggest entering your outbound Caller ID Name must be in '''capital letters'''. This will appears more clearly/visible on some devices.
- You must NOT use any special characters, they will not be displayed.
- Some of regular Canadian providers will not show more than 15 characters. We suggest shrinking or adapt your caller ID.
- Spaces are allowed in a caller id name.

* Once you are done, tap the Check mark at the top right of the screen and you should be ready to make calls after a few seconds.
: [[File:Grandstream Wave Registered.png|200px]]

Microsip

2023-07-26T02:04:35Z

Roy:

File:CallerIDnumber.png

2023-07-26T02:04:17Z

Roy:

Microsip

2023-07-26T02:01:39Z

Roy:

Microsip

2023-07-26T02:01:12Z

Roy:

Microsip

2023-07-26T01:59:59Z

Roy:

File:CID.png

2023-07-26T01:59:20Z

Roy:

Microsip

2023-07-26T01:57:05Z

Roy:

Microsip

2023-07-26T01:55:49Z

Roy:

Microsip

2023-07-26T01:54:31Z

Roy:

Microsip

2023-07-26T01:53:55Z

Roy:

File:Microsip5.png

2023-07-26T01:51:39Z

Roy:

File:Microsip4.png

2023-07-26T01:51:24Z

Roy:

Microsip

2023-07-26T01:44:41Z

Roy:

File:Microsip3.png

2023-07-26T01:44:23Z

Roy:

Microsip

2023-07-26T01:43:30Z

Roy:

Microsip

2023-07-26T01:42:42Z

Roy:

File:Microsip2.png

2023-07-26T01:41:37Z

Roy: uploaded a new version of "File:Microsip2.png"

Microsip

2023-07-26T01:34:25Z

Roy:

Microsip

2023-07-26T01:34:02Z

Roy:

Microsip

2023-07-26T01:33:25Z

Roy: