VoIP.ms Wiki - User contributions [en]

Cisco IP Phone 7940/7960

2012-07-05T20:54:01Z

Mlapping: /* Configuration from the phone's settings menu */

[[File:Cisco_7960g.png|300px|thumb|left|Cisco IP Phone 7940/7960]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Configuration from the phone's settings menu==

#Press '''**#''' to unlock the '''Configuration Protection'''
#*Some firmware versions must be unlocked by pressing the '''"Settings"''' button, scrolling down to the '''"Unlock Phone"''' option and pressing the '''"Select"''' softkey
#Press '''Settings''' button
#Go to '''"Network Configuration"''' to set the IP connectivity
#Go to SIP Configuration
#Select '''"Line 1"'''
##In '''Name''' and '''Authentication Name''' enter your VoIP.ms username(e.g. 100000)
##Enter your VoIP.ms password
##Enter any of the VoIP.ms servers (e.g. atlanta.voip.ms) as '''Proxy Address'''
##Configure '''Preferred Codec''' to g711u
##Press '''Back'''
##Press '''Save''' to apply changes.

'''As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall if, any.'''
[[Category: SIP phones]]

Cisco IP Phone 7940/7960

2012-07-05T20:43:21Z

Mlapping: /* Configuration Details */

[[File:Cisco_7960g.png|300px|thumb|left|Cisco IP Phone 7940/7960]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Configuration from the phone's settings menu==

1. Press '''**#''' to unlock the '''Configuration Protection''' (some versions can also be unlocked pressing the "settings" button, scroll all the way to the bottom to the "unlock phone" option and then press the "select" softkey).

2. Press '''Settings''' button

3. Go to '''"Network Configuration"''' to set the IP connectivity

4. Go to SIP Configuration

5. Select Line 1

* In '''Name''' and '''Authentication Name''' enter your VoIP.ms username(e.g. 100000)

* Enter your VoIP.ms password

* Enter any of the VoIP.ms servers (e.g. atlanta.voip.ms) as '''Proxy Address'''

* Configure '''Preferred Codec''' to g711u

* Press '''Back''' and then '''Save''' to apply changes.

'''As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall if, any.'''
[[Category: SIP phones]]

Cisco IP Phone 7940/7960

2012-07-05T20:41:17Z

Mlapping: /* Configuration Details */

[[File:Cisco_7960g.png|300px|thumb|left|Cisco IP Phone 7940/7960]]
<div style="width:100%;overflow:hidden;clear:both"></div>

==Configuration Details==

1. Press '''**#''' to unlock the '''Configuration Protection''' (some versions can also be unlocked pressing the "settings" button, scroll all the way to the bottom to the "unlock phone" option and then press the "select" softkey).

2. Press '''Settings''' button

3. Go to '''"Network Configuration"''' to set the IP connectivity

4. Go to SIP Configuration

5. Select Line 1

* In '''Name''' and '''Authentication Name''' enter your VoIP.ms username(e.g. 100000)

* Enter your VoIP.ms password

* Enter any of the VoIP.ms servers (e.g. atlanta.voip.ms) as '''Proxy Address'''

* Configure '''Preferred Codec''' to g711u

* Press '''Back''' and then '''Save''' to apply changes.

'''As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the External (publicly addressable) IP address of Router or firewall if, any.'''
[[Category: SIP phones]]