Firewall - VoIP.ms Wiki

Firewall

From VoIP.ms Wiki

Revision as of 13:13, 12 August 2015 by Rod (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

Setup

When configuring your firewall to work with VoIP.ms, there are certain ports which need to be enabled to avoid quality and/or stability issues. Generally these ports are configured by default; however for users requiring the specific port numbers and protocols please use the information below:


SIP Ports

Port = 5060
*Port range = 5060 - 5080
Protocol = UDP or UDP/TCP
Direction = Incoming and Outgoing


RTP Ports

The RTP port may vary by device. If configuring a firewall you will want to configure a range which includes the default RTP port in your device.

Port range = 10001-20000 UD
Protocol = UDP or UDP/TCP
Direction = Incoming and Outgoing



IP addresses

If you have a secured/restricted network and need to know the IP addresses to allow for VoIP.ms, then please use the addresses found Here .

Router Settings

If your router includes a SIP ALG and/or SPI Firewall setting please ensure that it is disabled.


SonicWall

When using a SonicWALL and a PBX behind that SonicWALL, some of the inbound SIP connections may get refused because the SonicWALL is quick to timeout the UDP sessions on the firewall. Please Click Here for further details.




If you still have questions on this topic please contact us for further assistance.

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox