Cisco Linksys PAP2T - VoIP.ms Wiki

Cisco Linksys PAP2T

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[quality revision][quality revision]
(Configuration Details)
(Configuration Details)
Line 38: Line 38:
'''Proxy:''' atlanta.voip.ms (one of our multiple servers)<br>
'''Proxy:''' atlanta.voip.ms (one of our multiple servers)<br>
'''Display Name:''' John Smith (your name or company name)<br>
'''Display Name:''' John Smith (your name or company name)<br>
-
'''User ID:''' 100000 (your voip.ms account)<br>
+
'''User ID:''' 100000 (your VoIP.ms username)<br>
'''Password:''' ******** (the account password)<br>
'''Password:''' ******** (the account password)<br>
'''Register Expires:''' 180<br>
'''Register Expires:''' 180<br>

Revision as of 13:56, 25 April 2011

Cisco Linksys PAP2T

Configuration Details

Step 1

The first step is to find out what IP Address your adapter is currently using. To do this, pick a phone connected on Line 1 and do the following:

Dial: **** (That is 4 asterisks)
Once this is done, dial: 110# (110 followed by a square)

The system should now playback the IP Address your device has been assigned.
(Example: 192.168.1.2)


Step 2

Using your favorite web browser from a computer on the same network, point the address to the IP address of your adapter.
(example http://192.168.1.2) Replace 192.168.1.2 by the IP Address your device is currently using.


Step 3

You should now see the web interface of your Linksys/Sipura.

click on the link "Admin", and once the page has reloaded, click again on the link "Advanced View".


Step 4

Under the LINE 1 Tab, Find the following fields and fill them with the following information

Proxy: atlanta.voip.ms (one of our multiple servers)
Display Name: John Smith (your name or company name)
User ID: 100000 (your VoIP.ms username)
Password: ******** (the account password)
Register Expires: 180
Proxy Fallback Intvl: 180
Nat Keep Alive: Yes
Nat Mapping/Traversal: Yes


Step 5 (Optional)

Optionally, To save bandwidth, you can change Line 1 "Preferred Codec" to G729a and make sure "Use Pref Codec Only" is set to no.


Step 6 (Optional)

Optionally, you can configure your adapter with a better dial plan, allowing faster dialing of 10 digits number (Local US/Canada) and also enable 7 digits dialing in one area code of your choice.

At the bottom of Line 1 TAB, you will find a field called Dial Plan

Replace the 555 digits in the following line by the area code of your choice and copy the line, including parenthesis, in the Dialplan field in Line 1 Tab at the bottom of the page:

(<:1555>[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxxS0|[2-9]xx[2-9]xxxxxxS0|*xx|*xx.|[3468]11|911S0|822|0|00|[2-9]xxxxxx|4XXX|xxxxxxxxxxxx.)


Step 7

Click on the "Save Settings " button at the bottom of the form.


Configuration Screens


PAP2T Configuration Screen


PAP2T Configuration Screen


PAP2T Configuration Screen
Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
Configuration
Guides (English)
Guides (Français)
Guías (Español)
Toolbox